|
|
Apodization of the fibre Bragg gratings by use of phase mask UV exposition
Burian, Tomáš ; Hejátková, Edita (referee) ; Urban, František (advisor)
This thesis describes the problem of fiber gratings, focusing primarily on the use of Bragg's grids in the sensor. It describes the types of fiber mesh production, especially the method of writing with a phase mask. The next part deals with the possibilities of using apodization in fiber optic systems. It deals with the various functions that can be used to describe apodization. The following part describes the moire principle, especially the method of overlapping two phase masks with a different period.
|
|
|
Production testing equipment
Vokřál, Jiří ; Musil, Vladislav (referee) ; Hejátková, Edita (advisor)
The thesis introduces the design of a test device for preassembled mechatronic cylindrical locks. The device is designed to test the mechanical and electronic parts which ensure minimisation of loss caused by poor preassembling or defect due to electronic parts. Since the defect will only come to realisation upon the complete product testing, the time of complete dismounting, exchange and assembly of the mechatronic parts would be saved and also time required for the final test of the whole product on the device would be saved.
|
|
|
Distance and position determination using ultrasound
Bartoš, Dalibor ; Šteffan, Pavel (referee) ; Hejátková, Edita (advisor)
This thesis describes distance measurement using ultrasound and its application in determining position of an object. First part of this thesis describes principles of ultrasound wave propagation, piezoelectric transducers, basics of both triangulation and trilateration and different kinds of park assist systems. The second part contains description of algorithms designed to determine position of two objects at the same time. Last part of the thesis describes implementation of created algorithms into software and also modules used in the test measurement.
|
|
|
Emisivity and its Impact on the Heat Conductivity
Gančev, Jan ; Hejátková, Edita (referee) ; Szendiuch, Ivan (advisor)
This work deals with the issue of emissivity and its impact on the heat dissipation.The first part describes the basics of thermal management, the issue of emissivity and its measurement. In the second, experimental part, are dedicated the emissivity values of examined specimens. These values are then used as initial conditions for the thermal simulation. In the last part are compared the measured results and the simulated results and is evaluated the impact of emissivity for the heat dissipation.
|
|
| |
|
|
Roughness measurement with laser profilometry
Mach, Radoslav ; Frk, Martin (referee) ; Hejátková, Edita (advisor)
The bachelor thesis deals with technology of laser profilometry for material roughness measurements purposes. The theoretical part deals with all aspects of the issue in an effective way and highlights the essential characteristics of used components and material roughness. The focus of this work is in first step to describe the external factors affecting the visual image processing such as increasing of environment temperature and its effect for a camera sensors. And particularly the relationship between CMOS and CCD technologies. The second step is for measuring roughness parameters of materials, such as metal, wood, rubber and plastic with three different lasers. Results demonstrate correlation between the wavelengths of the used laser lights with particular materials.
|
|
| |
|
|
Autonomous power supply with higher EMC requirements
Burian, Jan ; Deneš, Roman (referee) ; Hejátková, Edita (advisor)
This paper deals with design of mechanical and electrical components of autonomous power supply and its testing. It consists of selecting of the materials, draft of shapes and calculations of feed-throughs for the source container to ensure the required electromagnetic characteristics. It also includes the selection of electronic components, comparison of DC-DC converters and filter design with focus on the highest electromagnetic immunity and the lowest electromagnetic emissions.
|
|
|
Hodoor – electronic attendance system
Predný, Patrik ; Hojdík, Matěj (referee) ; Hejátková, Edita (advisor)
This thesis deals with the issue of attendance recording. The aim of the thesis was to design a solution and then create a hardware terminal for the electronic attendance system. The whole system is based on the latest web technologies using the Raspberry Pi hardware, for the client terminal. Future use of the device is possible for both home and commercial use. The whole system was distributed globaly as Open Source project. The result of thesis is a physical prototype of a client terminal, based on the Raspberry Pi platform, Electron based application for terminal and a web application communicating with the server solution.
|
|
|
SPICE model of LDMOS structure
Loginov, Dmitrii ; Biolek, Dalibor (referee) ; Hejátková, Edita (advisor)
V této bakalářské práci je provedeno porovnání struktury LDMOS oproti konvenční MOS struktuře. Anomální efekty, výzvy, které tato struktura přináší do oblasti modelování a charakterizace jsou popsány v první kapitole. Další část této práce se zaměřuje na existující možné přístupy v charakterizaci LDMOS struktury, které se používají v polovodičovém průmyslu. V druhé kapitole je také popsána BSIM metodologie, která je dále použitá pro vytváření modelu LDMOS popisujícího DC a CV chování. Kroky charakterizace, která probíhala v laboratoři ON Semiconductor, jakožto měření součástky a ladění charakteristik modelu až do výsledného souboru parametrů BSIM4, jsou uvedeny v posledních kapitolách této práce.
|
guest ::
