National Repository of Grey Literature 23,947 records found  beginprevious23938 - 23947  jump to record: Search took 0.89 seconds. 

Footbridge
Blaška, Jan ; Straka, Bohumil (referee) ; Sýkora, Karel (advisor)
The subject of the final thesis is timber footbridge for pedestrians and cyclists over the Desna river in Loucna nad Desnou village. The length of the footbridge is 30 m, width 3 m and height is variable from 4 to 5 m. The footbridge is covered with roof inclination of 20° in transverse direction and the roof is arch in longitudinal direction. Roofing is metal sheet. The structure is three-dimensional truss consists of two truss connected by rafters, floor beams and by members of bracing. The 2D-truss consists of bottom chord, top arch chord and webs. There are end posts made of streel bracing frames. The material of structure is mostly glued laminated timber, then timber and steel. The steel is used for connectors and steel bracing frames.

Mixed-use building in Brno
Koždoň, Jakub ; Procházka, Martin (referee) ; Sobotka, Jindřich (advisor)
The subject of this diploma thesis is a newly built mixed-use building in Brno. It is a four-storey building without cellar. The building is located on a corner plot in an urban part of Brno - Židenice. In the 1st floor there are three business units. On the other floors are a total of 11 apartments. One apartment is located in the courtyard. It is designed for people with limited mobility. The vertical structures are of the ceramic blocks Porotherm. Ceiling structures and staircases are cast-in-place reinforced concrete. The building is insulated with contact insulation system ETICS. The roof is warm flat. The project was processed by computer software AutoCAD 15.

Steel foot-bridge
Pauer, Jan ; Barnat, Jan (referee) ; Štrba, Michal (advisor)
The diploma thesis describes the design and assessment of steel footbridge for pedestrians and cyclists across the river Svratka in Brno. As the main material of structural elements was used steel S355. In the beginning is deal with two variants of structural system, which are compared with each other and the better variant is chosen. The main structural system of chosen variant consist of two parabolic arches bend down to each other on which is suspended by suspenders intermediate deck. The deck consist of two steel beams with floor beams and composite cencrete slab. The span length is 50 m.

Mountain Hotel
Hrachovec, Matěj ; Dohnal, Jakub (referee) ; Pěnčík, Jan (advisor)
The thesis focuses on a project of a mountain hotel. Hotel is located in the area Jeseník, altitude of 550 m. It is detached hotel with a rectangular ground plan with one underground floor and four above ground floors. In the basement is the engine room ventilation, bikes room and in the second part of the underground is wellness center. On the first floor is a restaurant. In the other floors are hotel rooms for 1 to 3 person. On the fourth floor are two apartments. The hotel is based on the monolithic footings.In the basement the vertical supporting are from concrete. Other vertical supporting are built from bricks Porotherm 30, which is insulated and ventilated facade with laggin 150 mm. Supporting horizontal structures are made of monolithic reinforced concrete. The building is covered with a double skin roof structure made of wooden trusses.

Center of water skiing Soběslav
Veselý, Tomáš ; Klubalová, Pavlína (referee) ; Brzoň, Roman (advisor)
The thesis is focused of proposal and procesing of project documentation Center for waterskiing. The proposed object is located in the western part of the town Soběslav, in the locality aimed at sports activities. The building is created of facilities for summer sports, especially water skiing and wakeboarding. Further there will be built a playground for ball sports and track on roller skates. This is a three-storey no with a cellar object with a flat roof. The object is based on the foundation reinforced concrete pads a strips. The first floor is bricked of permanent formwork and partly of cast in place structure. The second and third floors is designed of clay blocks POROTHERM. This masonry is insulated with the aid of external contact thermal insulation. In the western part of the building is designed ventilated facade. The floor structures is designed from prestressed reinforced concrete panel SPIROLL and partly from reinforced concrete slabs. The object is divided into several operating units. They are the gym and its facilities, restaurant with kitchen, facilities for employees and the necessary storerooms, coffeehouse, shop with sporting equipment, rental equipment for water skiing and a dressing room serving the outdoor sports. The essential part of the second floor is comprised outdoor terrace. From this terrace is allowed entry to the coffeehouse, restaurants, shops and on the main staircase.

Návrh a konstrukce datového projektoru
Wallenfels, Jiří ; Mašek, Karel (advisor) ; Štěpán, Pavel (referee)
Cílem této práce je nastínit možnosti návrhu a konstrukce datového projektoru z běžně dostupných součástek. První část této práce bude teoreticky popisovat, jak takový DIY projektor funguje a jak fungují jeho jednotlivé části. Budou v ní také ukázána možná řešení daných dílčích problémů. V druhé části pak bude stručný popis konstrukce takového projektoru a popis řešení problémů, které nastaly při samotné konstrukci a jakým způsobem jsem je vyřešil. Budou tam také prezentovány výsledky. V závěru bude stručné zhodnocení a nakonec ještě malá zmínka o projekčních plochách, které sice nejsou tématem práce, ale je vhodné se o nich zmínit, protože s tématikou DIY projektoru úzce souvisí.

Pojištění pro případ přerušení provozu
Žilová, Marija-Anna ; Dědková, Eva (advisor) ; Daňhel, Jaroslav (referee)
Cílem práce je obecně popsat pojištění pro případ přerušení provozu, včetně specifik v konstrukci a jeho nových podob (např. elektronická rizika a riziko terorismu) a zhodnotit možnosti jeho uplatnění na pojistném trhu v České republice. V úvodu práce je stručně vysvětlena podstata a historický vývoj pojištění pro případ přerušení provozu. Dále je popsán charakter rizik, možné příčiny přerušení provozu, podrobný rozbor konstrukce a specifik daného pojištění. Práce zmiňuje možnou klasifikaci pojištění pro případ přerušení provozu a věnuje se také moderním formám tohoto pojištění. Analýza využití pojištění přerušení provozu v ČR je provedena formou srovnání nabídek čtyř velkých pojišťoven působících na českém pojistném trhu.

Investigation of aeroelastic bridge instabilities using the multidimensional Fokker-Planck equation and wind-tunnel experiment
Král, Radomil
Stability of bridges and other line-like engineering structures is an important part of their overall design. It is also still of great interest nowadays due to a higher demand on increasing the span while maintaining an economical cost and service. During the previous decades sophisticated methods for the aeroelastic instability prediction have evolved and successfully applied to the real structures and many questions have been adequately answered.

Konstrukce fotopasti pomocí počítače RaspBerry Pi
ŠVÁB, Daniel
The aim of this bachelor thesis is to design a functional photo trap using the platform of oneboard computer Raspberry Pi version 2. Photo trap is going to be used as CCTV or Security camera which také a photo every time it recognizes a movement. When the photo is taken, Raspberry Pi sends it to owner´s e-mail address and a notification about a movement detection is sent via Pushetta app to his mobile.

Some results of simulations of flows with internal permeable walls
Louda, Petr
The work deals with the numerical modelling of compressible flow in a domain containing permeable walls in its interior, i.e. submerged in the fluid. The aim is to exclude direct simulation and find a model approximating the flow through a permeable plate driven by the static pressure difference between the sides of the wall. The numerical experiments so far enable to understand better forming of parasitic wave structures in the measuring section of the wind tunnel. The model of permeable wall needs further verification.