|
Plasma spraying from liquids: plasma liquid interaction and coating build up
Tesař, Tomáš ; Mušálek, Radek ; Medřický, Jan ; Lukáč, František
Plasma spraying from liquid feedstocks is a rapidly developing field of thermal spraying since the coatings prepared from liquids exhibit some unique features, such as high hardness, thermal shock resistance or low thermal and electric conductivity. The key factor influencing the final coating character and properties is the input material which may be in the form of a suspension or a solution. Parameters of the selected suspension (solids concentration, viscosity, surface tension, chemical composition, etc.) or solution (concentration, etc.) determine its interaction with the plasma jet which strongly influences the coating buildup. This proceeding introduces the problematics of the interaction between the liquid feedstock material with the plasma jet and presents the way of evaluation of the coating buildup.
|
|
Lifelong Education as a Part of the Social System
Neckařová, Jana ; Šrédl, Karel (advisor) ; Hana, Hana (referee)
The diploma thesis discusses about education of adult population, while pointing out necessity of education in any age. This thesis explain importance of education of the adult population, mention forms and possible methods which are used in this type of education the most. Besides the theoretical outcome there is practical aspect included as well in form of questionnaires. Investigation in form of research was focused directly on employees, who as well as on employers whose employees attended the program. In summary both parties consider adulthood gained knowledge as a great benefit to employee as well as employer. In any case, people with higher level of education have better chances of getting a possible job than those with no or low level of education.
|
|
Freezing technology of bull sperm in relation to its survivability and fertilization ability
Doležalová, Martina ; Stádník, Luděk (advisor) ; Jiří, Jiří (referee)
The aim of optimalization the insemination doses production is to provide the highest fertilization ability of spermatozoa during the demanding proces of processing fresh semen and its subsequent cryopreservation. Temperature changes causes spermatozoa damage during the cooling and freezing. Spermatozoa is exposed to cold shock and many others limiting factors, which leads to cell death and therefore to decline of fertilization ability of thawed insemination doses. For increasing spermatozoa resistance, exactly the plasma membrane resistance against cold shock was fraction of egg yolk LDL cholesterol (low density lipoprotein) at various concentrations into the comercially produced diluents added. It is believed that LDL acts possitively to plasma membrane and helps to maintain the fertilization ability of spermatozoa after thawing. Following step in the proces of insemination doses production is slow cooling of diluted semen and equilibration, when the straws are store at cooling box for 30 minutes to 240 hours. This period is necessary to penetrate of certain diluent components into the spermatazoa also maintain the balance between their intracellular and extracellular concentration. Also important is subsequent freezing temperature gradient of insemination doses. The most suitable freezing method is based on computer controlled temperature decline in freezing chamber which allows the precise control of ice crystals formation that could tear and kill the cell.
During 2012 to 2016 was repeatedly collected semen from the group of breeding bulls (n = 27, Holstein and Czech Fleckvieh breed) at AI centre. Semen which fulfill the standard entrance conditions in first step was evenly into several parts divided. For dilution the three types of comercially diluents AndroMed, Bioxcell and Triladyl with and without LDL addition were used. Into the diluents AndroMed and Bioxcell the concentration of LDL 4 %, 6 % and 8% into the dilent Triladyl 6 %, 8 % and 10 % was added. Diluted semen was filled into the glass capillares with volume 0,1 ml and temperature +4 °C. Subsequently the sample was placed to cold bath (0°C) for 10 minutes. Then the volume of capillare with physiological solution (37 °C) was mixed and for next 120 minutes was incubate. The effect of cold shock to proportion of live spermatozoa was evaluated by using Eosin and Nigrosine staining technique during heat test of spermatozoa survivability after spermatozoa heating and after 120 minutes of incubation.
The more suitable semen diluents which provide the higher spermatozoa resistance against cold shock were AndroMed and Bioxcell. Together the possitive effect of LDL addition into the diluents to lower decrease of proportion of live spermatozoa during heat test was found (P<0.05). The most suitable LDL concentration which had a favorable influence at spermatozoa resistance against cold shock was 6 % in diluent Bioxcell. Values of the proportion of live sperm were higher at the beginning of the heat test (+1.31% to + 3.2%) and after 120 minute incubation (+5.82% to +8.41%) compared to other diluents with and without addition of LDL.
In the next step the process of equilibration was optimized, is an important part of insemination doses production. The effect of the length of equilibration for subsequent fertilization ability of spermatozoa was evaluated using spermatozoa motility based of CASA and proportion of live spermatozoa after thawing and during heat survival test lasting 120 minutes (37 ° C). Suitable semen was diluted by comercially used diluent AndroMed based on soya lecithin, filled into the straws (0.25 ml), cooled and equilibrated in cooling box for 30, 120 and 240 minutes and freezed in programmable freezing box applying four types of freezing curves differing in temperature rate decline. There was used standard and by producer recommended 3. phase freezing curve, then 2. phase freezing curve, and 3. phase freezing curve with slower as well as rapid decline of temperature rate in freezing chamber, compared with standard freezing curve. The highest spermatozoa motility was found using 240 minutes of equilibration by +2.72% and +4.58% compared to other lengths of equilibration (P <0.05 to 0.01). The highest proportion of live spermatozoa was found using 120 minutes of equilibration (+6.87 % and +8.68 %). The highest average spermatozoa motility during heat test after thawing was achieved by using 2. phase freezing curve (from +2.97% to +10.37%, P <0.05), also in the proportion of live spermatozoa (from + 4.37% to +8.82%, P <0.01). When evaluating interaction between the length of equilibration and freezing curve (standard 3. phase and 2 . phase freezing curve), the highest average spermatozoa motility and proportion of live spermatozoa using 240 minutes of equilibration by both freezing curves was reached, there was no statistically significant differences. As well as, in all evaluated parts of this study the individual differences between ejaculate of bulls and within semen from one bull (P <0.05) as secondary effect were found.
To maintain good fertilization ability of semen during cryopreservation is necessary to increase the spermatozoa resistance against cold shock using addition of correct concentration of LDL into the commercially used diluents AndroMed and Bioxcell. Subsequently the fertilization ability of insemination dose is influenced by cooling, the length of equilibration and freezing. The length of equilibration 120 minutes and more as well as gentle way of freezing according to freezing curve, which ensures a gradual decrease of temperature in freezing chamber provided the higher average spermatozoa motility and proportion of live spermatozoa.
|
|
Confidence Cycles and Liquidity Hoarding
Audzei, Volha
Market confidence has proved to be an important factor during past crises. However, many existing general equilibrium models do not account for agents’ expectations, market volatility, or overly pessimistic investor forecasts. In this paper, we incorporate a model of the interbank market into a DSGE model, with the interbank market rate and the volume of lending depending on market confidence and the perception of counterparty risk. In our model, a credit crunch occurs if the perception of counterparty risk increases. Our results suggest that changes in market confidence can generate credit crunches and contribute to the depth of recessions. We then conduct an exercise to mimic some central bank policies: targeted and untargeted liquidity provision, and reduction of the policy rate. Our results indicate that policy actions have a limited effect on the supply of credit if they fail to influence agents’ expectations. Interestingly, a policy of a low policy rate worsens recessions due to its negative impact on banks’ revenues. Liquidity provision stimulates credit slightly, but its efficiency is undermined by liquidity hoarding.
Fulltext:  PDF
|
|
Photocatalytic Decomposition of Wastewater from the Production of Explosives
Brom, Petr ; Brožek, Vlastimil ; Březina, Václav ; Hlína, Michal ; Mastný, L. ; Novák, M.
Water stabilized plasma generator WSP® H-500, operating on the principle of Gerdien arc was used for the photocatalytic decomposition of furazan- and picraminate-based explosives. The generator emits intensive radiation in the range of 300-660 nm, which allows not only to activate photocatalysts based on TiO2, but also other semiconductor oxides with a narrower band gap, such as tungsten oxide. The photocatalytic decomposition of sewage and slurries containing the potassium salt of 4-hydroxy-4,6-dihydro-5,7- dinitrobenzofurazane-3-oxide (KDNBF) or sodium picraminate (NaC6H4N3O5) was performed using the anatase paste and newly developed photocatalyst produced by the company Precheza a.s. The photocatalytic reactor was built using a quartz tube coil with an internal volume of 650 ml, with a nominal size of the irradiated area of 7.5 dm2 (value reduced by the area of the gaps between coil turns) to enable the flow the processing solution or suspension of up to 10 l / min. The centre of the coil is exposed to the plasma jet with the intensity\nof 80 kW; of which 15 kW is transformed into the light radiation. 11% of the radiation output was used for the presented experiments. The time of exposition was 45 mins and 20 l of solution were treated. In the case of KDNBF, 90% of the compound was decomposed. Moreover, 100% of sodium picraminate were decomposed after 15 minutes into low-molecular inorganic compounds. Advantage of the assembly is the ability to treat highly dangerous chemical compounds in a closed cycle and test selective catalyst
|
|
Packet Classification Algorithms
Puš, Viktor ; Lhotka,, Ladislav (referee) ; Dvořák, Václav (advisor)
Tato práce se zabývá klasifikací paketů v počítačových sítích. Klasifikace paketů je klíčovou úlohou mnoha síťových zařízení, především paketových filtrů - firewallů. Práce se tedy týká oblasti počítačové bezpečnosti. Práce je zaměřena na vysokorychlostní sítě s přenosovou rychlostí 100 Gb/s a více. V těchto případech nelze použít pro klasifikaci obecné procesory, které svým výkonem zdaleka nevyhovují požadavkům na rychlost. Proto se využívají specializované technické prostředky, především obvody ASIC a FPGA. Neméně důležitý je také samotný algoritmus klasifikace. Existuje mnoho algoritmů klasifikace paketů předpokládajících hardwarovou implementaci, přesto však tyto přístupy nejsou připraveny pro velmi rychlé sítě. Dizertační práce se proto zabývá návrhem nových algoritmů klasifikace paketů se zaměřením na vysokorychlostní implementaci ve specializovaném hardware. Je navržen algoritmus, který dělí problém klasifikace na jednodušší podproblémy. Prvním krokem je operace vyhledání nejdelšího shodného prefixu, používaná také při směrování paketů v IP sítích. Tato práce předpokládá využití některého existujícího přístupu, neboť již byly prezentovány algoritmy s dostatečnou rychlostí. Následujícím krokem je mapování nalezených prefixů na číslo pravidla. V této části práce přináší vylepšení využitím na míru vytvořené hashovací funkce. Díky použití hashovací funkce lze mapování provést v konstantním čase a využít při tom pouze jednu paměť s úzkým datovým rozhraním. Rychlost tohoto algoritmu lze určit analyticky a nezávisí na počtu pravidel ani na charakteru síťového provozu. S využitím dostupných součástek lze dosáhnout propustnosti 266 milionů paketů za sekundu. Následující tři algoritmy uvedené v této práci snižují paměťové nároky prvního algoritmu, aniž by ovlivňovaly rychlost. Druhý algoritmus snižuje velikost paměti o 11 % až 96 % v závislosti na sadě pravidel. Nevýhodu nízké stability odstraňuje třetí algoritmus, který v porovnání s prvním zmenšuje paměťové nároky o 31 % až 84 %. Čtvrtý algoritmus kombinuje třetí algoritmus se starším přístupem a díky využití několika technik zmenšuje paměťové nároky o 73 % až 99 %.
|
|
Acceleration of Object Detection Using Classifiers
Juránek, Roman ; Kälviäinen, Heikki (referee) ; Sojka, Eduard (referee) ; Zemčík, Pavel (advisor)
Detekce objektů v počítačovém vidění je složítá úloha. Velmi populární a rozšířená metoda pro detekci je využití statistických klasifikátorů a skenovacích oken. Pro učení kalsifikátorů se často používá algoritmus AdaBoost (nebo jeho modifikace), protože dosahuje vysoké úspěšnosti detekce, nízkého počtu chybných detekcí a je vhodný pro detekci v reálném čase. Implementaci detekce objektů je možné provést různými způsoby a lze využít vlastnosti konkrétní architektury, pro urychlení detekce. Pro akceleraci je možné využít grafické procesory, vícejádrové architektury, SIMD instrukce, nebo programovatelný hardware. Tato práce představuje metodu optimalizace, která vylepšuje výkon detekce objektů s ohledem na cenovou funkci zadanou uživatelem. Metoda rozděluje předem natrénovaný klasifikátor do několika různých implementací, tak aby celková cena klasifikace byla minimalizována. Metoda je verifikována na základním experimentu, kdy je klasifikátor rozdělen do předzpracovací jednotku v FPGA a do jednotky ve standardním PC.
|
|
Stiff Systems Analysis
Šátek, Václav ; Dalík, Josef (referee) ; Horová, Ivana (referee) ; Kunovský, Jiří (advisor)
The solving of stiff systems is still a contemporary sophisticated problem. The basic problem is the absence of precise definition of stiff systems. A question is also how to detect the stiffness in a given system of differential equations. Implicit numerical methods are commonly used for solving stiff systems. The stability domains of these methods are relatively large but the order of them is low. The thesis deals with numerical solution of ordinary differential equations, especially numerical calculations using Taylor series methods. The source of stiffness is analyzed and the possibility how to reduce stiffness in systems of ordinary differential equations (ODEs) is introduced. The possibility of detection stiff systems using explicit Taylor series terms is analyzed. The stability domains of explicit and implicit Taylor series are presented. The solutions of stiff systems using implicit Taylor series method are presented in many examples. The multiple arithmetic must be used in many cases. The new suitable parallel algorithm based on implicit Taylor series method with recurrent calculation of Taylor series terms and Newton iteration method (ITMRN) is proposed.
|
|
Network Architecture and Interconnection of Embedded Systems
Trchalík, Roman ; Drábek, Vladimír (referee) ; Srovnal, Vilém (referee) ; Švéda, Miroslav (advisor)
The thesis focuses on the architecture of embedded systems. It summarizes the current state of accepted standards from IEEE 1451 family, which deals with creating an environment for the sensors and their involvement in various networks. These standards describe the open, network-independent communication architecture for a sensor-based system. One of the main outcomes of this work is the architectures presented as case studies, which can be used as design patters for embedded applications. They are demonstrated on ZigBee technology suitable mainly for small devices with very low power consumption. Based on these studies the new design of universal gateway was proposed. Its major advantage is that it allows interconnection of the endpoints based on different sensor network technologies. Additionally, the thesis deals with modifying the routing protocol of ZigBee network in order to reduce power consumption required to transmit one data packet.
|
|
Optimization of network flow monitoring
Žádník, Martin ; Lhotka,, Ladislav (referee) ; Matoušek, Radomil (referee) ; Sekanina, Lukáš (advisor)
The thesis deals with optimization of network flow monitoring. Flow-based network traffic processing, that is, processing packets based on some state information associated to the flows which the packets belong to, is a key enabler for a variety of network services and applications. The number of simultaneous flows increases with the growing number of new services and applications. It has become a challenge to keep a state per each flow in a network device processing high speed traffic. A flow table, a structure with flow states, must be stored in a memory hierarchy. The memory closest to the processing is known as a flow cache. Flow cache management plays an important role in terms of its effective utilization, which affects the performance of the whole system. This thesis focuses on an automated design of cache replacement policy optimized to a deployment on particular networks. A genetic algorithm is proposed to automate this process. The genetic algorithm generates and evaluates evolved replacement policies by a simulation on obtained traffic traces. The proposed algorithm is evaluated by designing replacement policies for two variations of the cache management problem. The first variation is an evolution of the replacement policy with an overall low number of state evictions from the flow cache. The second variation represents an evolution of the replacement policy with a low number of evictions belonging to large flows only. Optimized replacement policies for both variations are found while experimenting with various encoding of the replacement policy and genetic operators. The newly evolved replacement policies achieve better results than other tested policies. The evolved replacement policy lowers the overall amount of evictions by ten percent in comparison with the best compared policy. The evolved replacement policy focusing on large flows lowers the amount of their evictions two times. Moreover, no eviction occurs for most of the large flows (over 90%). The evolved replacement policy offers better resilience against flooding the flow cache with large amount of short flows which are typical side effects of scanning or distributed denial of service activities. An extension of the replacement policy is also proposed. The extension complements the replacement policy with an additional information extracted from packet headers. The results show further decrease in the number of evictions when the extension is used.
|
guest ::
