|
Simulated Verification of Complex Technology Project
Varjan, Matúš ; Hrubý, Jiří (referee) ; Lenort,, Radim (referee) ; Rumíšek, Pavel (advisor)
In the introduction, doctoral thesis as a complex technological project uses the summary title Stability of production. Stability of production is defined as a maintaining the required properties of the system over a given time period. Stability of production, based on the literature study included: – generally known systems and concepts, for example Process Stability, System Stability, Toyota Production System, Lean Manufacturing, etc. – less-known systems and concepts, for example Maintaining the fidelity of the production program, Stable order-sequence concept. The practical part of the doctoral thesis is focused on the less-known concept: Stable order-sequence. The task of the Stable order-sequence is to follow the sequence of orders given by the planned production program in the course of the production and at the end of production. Maintaining the sequence of the orders has a positive experience in the logistics activities between the final producer and its suppliers. As it was found by the planned experiment for a full factory plan, the sequence of orders in the material flow of original equipment manufacturer is influenced mainly by: – the cause of the removing orders from material flow, – the effect of the causes LIFO stack vs. branched material flow, – the effect of the causes LIFO stack vs. branched material flow vs. the removing from the material flow. By the analysis of Stable order-sequence, it was found that the methodology of the concept contains deficiencies. It does not state how to choose for example the size of the time period, time interval, data editing etc. By this lack, the subject can skew the results in the evaluation of the indicator PFT0 up to 4 %. Or by using of suitable adjustment, the value of the indicator PFT0 can be improved more than 50 %. To test the concept of a Stable order-sequence in practice has been designed technological project with the support of discrete-event simulation. It was about the implementation of new management logic to the stack behind the welding of original equipment manufacturer. The new logic of management was designed with an emphasis on Stable order-sequence concept, to arrange the orders in process according to the planned sequence. On the base of the functionality verification of the new stack logic, it was found that the logic affects the sequence of the orders, but not fundamentally. In tracking the hourly intervals for 25th calendar week 2013, the value of PFT0 was not improved in 37 cases, the value remains in 30 cases and the value was improved by the value of the median 18,68 % in 30 cases orders.
|
| |
|
The effect of gait training with a prosthesis on stability and parameters in patients with thigh amputation
Tučková, Tereza ; Smékal, David (advisor) ; Kálal, Jan (referee)
Diploma thesis "Effect of gait school with prosthesis on stability and walking parameters of patients after transfemoral amputation deals with problems of patients after transfemoral amputation due to vascular etiology. It mentions elementary knowledge of rehabilitation after amputation of lower extremity. Furthermore, there are described main complications that amputation brings into the patient ́s life: pain associated with amputation, skin complications and psychological hardships. Emphasis is laid on gait and gait practice for patients with amputation. I further deal with deviations commonly observed on gait of these patients and with factors influencing the gait, including the influence of particular parts of the prosthesis on patients ́ gait. The practical part is dedicated to comparison of two different approaches to gait practice. The effect of these approaches is evaluated on the basis of results of two groups of patients. The results were gathered by examination on force plate, measurement of gait velocity, examination of gait cadence and evaluation of patients ́s gait videos. Furthermore, I use functional tests: LCI - 5, ABIS - R, ABC scale and PEQ. All of these examinations were performed at the beginning and in the end of patients ́ stay at the Clinic of rehabilitation in Hradec Králové. The...
|
|
Commercial banking of the Slovak republic
Šabík, Peter ; Němečková, Iveta (advisor) ; Trojanová, Kamila (referee)
The aim of this bachelor thesis is to analyze the commercial banking in the Slovak republic, to determine its stability and strengths.For this purpose are included the results of a comprehensive assessment of the Slovak banks, ratings for selected banks as well as Slovakia as a whole and the most recent Corruption Perception Index. The thesis also aims to analyze the products offered by a number of selected banks for beginning entrepreneurs with the goal of selecting the best possible product. Focus is on the accounts themselves with their conditions, pros and cons as well as on financing options and costs of other services for example letters of credit. The summary of the findings as well as s recommendation can be found at the end of the thesis
|
|
Stability of crystalline solids from first principles
Řehák, Petr ; Šob, Mojmír (referee) ; Černý, Miroslav (advisor)
This work deals with study of stability of solid crystals under isotropic loading. Ab initio methods were used for this purpose. Crystals of four fcc metals (Al, Cu, Ir, Au) and diamond were subjected to simulated isotropic tensile deformation and maximum value of isotropic stress was evaluated for them. Consequently, phonon spectra were calculated for several strain values in order to assess crystal stability. Phonon instabilities in dispersion curves of diamond, Al, Ir and Au appeared at strains lower than those corresponding to their decohesion. This appearance of instability determinates the value of ideal strength. However, significant reduction (by about 20%) was found only in the cases of Au and Ir.
|
|
Swarm Intelligence
Winklerová, Zdenka ; Šaloun, Petr (referee) ; Škrinárová,, Jarmila (referee) ; Zbořil, František (advisor)
The intention of the dissertation is the applied research of the collective ( group ) ( swarm ) intelligence . To demonstrate the applicability of the collective intelligence, the Particle Swarm Optimization ( PSO ) algorithm has been studied in which the problem of the collective intelligence is transferred to mathematical optimization in which the particle swarm searches for a global optimum within the defined problem space, and the searching is controlled according to the pre-defined objective function which represents the solved problem. A new search strategy has been designed and experimentally tested in which the particles continuously adjust their behaviour according to the characteristics of the problem space, and it has been experimentally discovered how the impact of the objective function representing a solved problem manifests itself in the behaviour of the particles. The results of the experiments with the proposed search strategy have been compared to the results of the experiments with the reference version of the PSO algorithm. Experiments have shown that the classical reference solution, where the only condition is a stable trajectory along which the particle moves in the problem space, and where the influence of a control objective function is ultimately eliminated, may fail, and that the dynamic stability of the trajectory of the particle itself is not an indicator of the searching ability nor the convergence of the algorithm to the true global solution of the solved problem. A search strategy solution has been proposed in which the PSO algorithm regulates its stability by continuous adjustment of the particles behaviour to the characteristics of the problem space. The proposed algorithm influenced the evolution of the searching of the problem space, so that the probability of the successful problem solution increased.
|
|
Stiff Systems Analysis
Šátek, Václav ; Dalík, Josef (referee) ; Horová, Ivana (referee) ; Kunovský, Jiří (advisor)
The solving of stiff systems is still a contemporary sophisticated problem. The basic problem is the absence of precise definition of stiff systems. A question is also how to detect the stiffness in a given system of differential equations. Implicit numerical methods are commonly used for solving stiff systems. The stability domains of these methods are relatively large but the order of them is low. The thesis deals with numerical solution of ordinary differential equations, especially numerical calculations using Taylor series methods. The source of stiffness is analyzed and the possibility how to reduce stiffness in systems of ordinary differential equations (ODEs) is introduced. The possibility of detection stiff systems using explicit Taylor series terms is analyzed. The stability domains of explicit and implicit Taylor series are presented. The solutions of stiff systems using implicit Taylor series method are presented in many examples. The multiple arithmetic must be used in many cases. The new suitable parallel algorithm based on implicit Taylor series method with recurrent calculation of Taylor series terms and Newton iteration method (ITMRN) is proposed.
|
|
Establishment of the organization Islamic state and its influence on the stability of the Near East
Chudoba, Jan ; Havlová, Radka (advisor) ; Volenec, Otakar (referee)
The thesis deals with the topic of the organization Islamic State, which has expanded in the territories of Iraq and Syria where it announced an establishment of a caliphate, which has not been recognized by any state. The Islamic state has challenged the status quo of Iraq and Syria and has significantly contributed to the destabilization of the region of the Near East. The aim of the thesis is primarily to analyze factors that have led to the radicalization of the locals, eventually to the support and expansion of this organization. The theoretical part of the thesis explains how the states of the Near East were created, describes the roots of the Sunni-Shia split and analyzes the socioeconomic and partly security development of Iraq and Syria. The practical part focuses especially on the development in Iraq after the fall of the regime of Saddam Hussein in 2003 and on the development in Syria after the beginning of the civil war in 2011 because these events are of great importance for today's situation. The last chapter of the thesis summarizes the efforts in fighting against this organization and outlines the influence of its existence on the region of the Near East.
|
|
Analysis of Influence of European Sovereign Debt Crisis on Financial institutions
Byrtusová, Eva ; Jílek, Josef (advisor) ; Titze, Miroslav (referee)
Banking crisis and following sovereign debt crisis are the cause of some changes on the financial market. This thesis is mainly focused on the debt crisis and its impact on financial sector stability. Roots, consequences and probable solutions of the debt crisis are also examined. Among analysed solutions were included proposals for financial transaction tax, stability bonds and regulation under new concept of CRD IV, bail-in and federalization of the eurozone. Analysed are also ratings, fiscal policy and optimality of the euro currency areas and its impact on stability of financial institutions. According to results, some proposals could be contrary to each other if implemented in its present form. Or it can increase moral hazard of financial institutions. Another consequence is establishment of new regulations. On the other hand, positive is that financial institutions have endured the sovereign debt crisis.
|
|
The use of (nano)oxides for metal and metalloid stabilization in contaminated soils
Michálková, Zuzana ; Komárek, Michael (advisor) ; Luke, Luke (referee)
The main objective of the thesis was to evaluate the potential of selected Mn and Fe (nano)oxides for the stabilization of metals and metalloids in contaminated soils. The research was focused basically on three materials - commercial nanomaghemite (Fe III), nanomagnetite (Fe II,III) and a synthetic amorphous Mn oxide (AMO). The main aim of the work was to provide a complex view on the chosen stabilizing amendments regarding not just their direct influence on contaminants mobility and stabilization mechanisms, but also their stability and alterations in soil conditions together with influence on soil microorganisms and higher plants. Firstly, adsorption properties of the tested materials towards Cd, Cu, Pb and As were investigated. In this context, the most effective material showed to be the AMO reaching one to two orders of magnitude higher adsorption capacities than Fe III and Fe II,III under given experimental conditions. Interestingly, the rate of As(V) adsorption onto AMO was increasing with increasing pH as a result of high pHzpc of the AMO (8.1) and significant dissolution of this phase at lower pH values. As a next step, the influence of (nano)oxides on metal(loid)s mobility and other physico-chemical soil characteristics after application to contaminated soil was examined. Again, the AMO proved to be the most efficient in reducing mobile pools of Cd, Cu, Pb, Zn and As. On the other hand, Fe III and Fe II,III addition had generally less significant effects on contaminants mobility. AMO application further resulted in an increase of soil pH connected with AMO dissolution and unwanted decomposition of soil organic matter. When (nano)oxides alterations in soil conditions were observed, MnCO3 coatings were identified on AMO surface while no significant changes were recorded for Fe III and Fe II,III. As the MnCO3 formation was connected with increased AMO stability, AMO particles synthetically covered with MnCO3 coating (denoted as SM AMO) were prepared. Although the SM-AMO had a lower mass loss in soil than pure AMO, the stabilizing efficiency was almost the same for both materials. The differences in surface composition of both materials were decreasing with time as MnCO3 naturally precipitated on the AMO surface in soils while the SM AMO coating was gradually dissolving. When investigating the effect on soil microbiota, AMO efficiently promoted soil microbial activity while no significant changes were observed in the case of Fe III and Fe II,III. The AMO was also able to reduce the uptake of Cd, Pb and Zn by sunflower (Helianthus annuus L.), eliminate Zn phytotoxicity symptoms and increase biomass yield. On the other hand, toxic levels of Mn released from the AMO in an acidic soil were found in sunflower tissues. AMO application is thus recommended for contaminated neutral or slightly alkaline pH with a higher cation exchange capacity in order to avoid unwanted release of Mn. Finally, various types of AMO-biochar composite sorbents were recently prepared and field experiment focused on stabilization of Cd, Pb, Zn and As using studied materials is currently under preparation. The combined results from the thesis highlight the importance of a complex experimental approach dealing with all parts of the contaminated soil environment in order to obtain complete information about the efficiency and usefulness of any newly developed stabilizing amendment.
|
guest ::
