|
New Methods for Increasing Efficiency and Speed of Functional Verification
Zachariášová, Marcela ; Dohnal, Jan (referee) ; Steininger, Andreas (referee) ; Kotásek, Zdeněk (advisor)
Při vývoji současných číslicových systémů, např. vestavěných systému a počítačového hardware, je nutné hledat postupy, jak zvýšit jejich spolehlivost. Jednou z možností je zvyšování efektivity a rychlosti verifikačních procesů, které se provádějí v raných fázích návrhu. V této dizertační práci se pozornost věnuje verifikačnímu přístupu s názvem funkční verifikace. Je identifikováno několik výzev a problému týkajících se efektivity a rychlosti funkční verifikace a ty jsou následně řešeny v cílech dizertační práce. První cíl se zaměřuje na redukci simulačního času v průběhu verifikace komplexních systémů. Důvodem je, že simulace inherentně paralelního hardwarového systému trvá velmi dlouho v porovnání s během v skutečném hardware. Je proto navrhnuta optimalizační technika, která umisťuje verifikovaný systém do FPGA akcelerátoru, zatím co část verifikačního prostředí stále běží v simulaci. Tímto přemístěním je možné výrazně zredukovat simulační režii. Druhý cíl se zabývá ručně připravovanými verifikačními prostředími, která představují výrazné omezení ve verifikační produktivitě. Tato režie však není nutná, protože většina verifikačních prostředí má velice podobnou strukturu, jelikož využívají komponenty standardních verifikačních metodik. Tyto komponenty se jen upravují s ohledem na verifikovaný systém. Proto druhá optimalizační technika analyzuje popis systému na vyšší úrovni abstrakce a automatizuje tvorbu verifikačních prostředí tím, že je automaticky generuje z tohoto vysoko-úrovňového popisu. Třetí cíl zkoumá, jak je možné docílit úplnost verifikace pomocí inteligentní automatizace. Úplnost verifikace se typicky měří pomocí různých metrik pokrytí a verifikace je ukončena, když je dosažena právě vysoká úroveň pokrytí. Proto je navržena třetí optimalizační technika, která řídí generování vstupů pro verifikovaný systém tak, aby tyto vstupy aktivovali současně co nejvíc bodů pokrytí a aby byla rychlost konvergence k maximálnímu pokrytí co nejvyšší. Jako hlavní optimalizační prostředek se používá genetický algoritmus, který je přizpůsoben pro funkční verifikaci a jeho parametry jsou vyladěny pro tuto doménu. Běží na pozadí verifikačního procesu, analyzuje dosažené pokrytí a na základě toho dynamicky upravuje omezující podmínky pro generátor vstupů. Tyto podmínky jsou reprezentovány pravděpodobnostmi, které určují výběr vhodných hodnot ze vstupní domény. Čtvrtý cíl diskutuje, zda je možné znovu použít vstupy z funkční verifikace pro účely regresního testování a optimalizovat je tak, aby byla rychlost testování co nejvyšší. Ve funkční verifikaci je totiž běžné, že vstupy jsou značně redundantní, jelikož jsou produkovány generátorem. Pro regresní testy ale tato redundance není potřebná a proto může být eliminována. Zároveň je ale nutné dbát na to, aby úroveň pokrytí dosáhnutá optimalizovanou sadou byla stejná, jako u té původní. Čtvrtá optimalizační technika toto reflektuje a opět používá genetický algoritmus jako optimalizační prostředek. Tentokrát ale není integrován do procesu verifikace, ale je použit až po její ukončení. Velmi rychle odstraňuje redundanci z původní sady vstupů a výsledná doba simulace je tak značně optimalizována.
|
|
Packet Classification Algorithms
Puš, Viktor ; Lhotka,, Ladislav (referee) ; Dvořák, Václav (advisor)
Tato práce se zabývá klasifikací paketů v počítačových sítích. Klasifikace paketů je klíčovou úlohou mnoha síťových zařízení, především paketových filtrů - firewallů. Práce se tedy týká oblasti počítačové bezpečnosti. Práce je zaměřena na vysokorychlostní sítě s přenosovou rychlostí 100 Gb/s a více. V těchto případech nelze použít pro klasifikaci obecné procesory, které svým výkonem zdaleka nevyhovují požadavkům na rychlost. Proto se využívají specializované technické prostředky, především obvody ASIC a FPGA. Neméně důležitý je také samotný algoritmus klasifikace. Existuje mnoho algoritmů klasifikace paketů předpokládajících hardwarovou implementaci, přesto však tyto přístupy nejsou připraveny pro velmi rychlé sítě. Dizertační práce se proto zabývá návrhem nových algoritmů klasifikace paketů se zaměřením na vysokorychlostní implementaci ve specializovaném hardware. Je navržen algoritmus, který dělí problém klasifikace na jednodušší podproblémy. Prvním krokem je operace vyhledání nejdelšího shodného prefixu, používaná také při směrování paketů v IP sítích. Tato práce předpokládá využití některého existujícího přístupu, neboť již byly prezentovány algoritmy s dostatečnou rychlostí. Následujícím krokem je mapování nalezených prefixů na číslo pravidla. V této části práce přináší vylepšení využitím na míru vytvořené hashovací funkce. Díky použití hashovací funkce lze mapování provést v konstantním čase a využít při tom pouze jednu paměť s úzkým datovým rozhraním. Rychlost tohoto algoritmu lze určit analyticky a nezávisí na počtu pravidel ani na charakteru síťového provozu. S využitím dostupných součástek lze dosáhnout propustnosti 266 milionů paketů za sekundu. Následující tři algoritmy uvedené v této práci snižují paměťové nároky prvního algoritmu, aniž by ovlivňovaly rychlost. Druhý algoritmus snižuje velikost paměti o 11 % až 96 % v závislosti na sadě pravidel. Nevýhodu nízké stability odstraňuje třetí algoritmus, který v porovnání s prvním zmenšuje paměťové nároky o 31 % až 84 %. Čtvrtý algoritmus kombinuje třetí algoritmus se starším přístupem a díky využití několika technik zmenšuje paměťové nároky o 73 % až 99 %.
|
|
Image analysis in tribodiagnostics
Machalík, Stanislav ; Stodola,, Jiří (referee) ; Tillová,, Eva (referee) ; Zemčík, Pavel (advisor)
Image analysis of wear particles is a suitable support tool for detail analysis of engine, gear, hydraulic and industrial oils. It allows to obtain information not only of basic parameters of abrasion particles but also data that would be very difficult to obtain using classical ways of evaluation. Based on the analysis of morphological or image characteristics of particles, the progress of wearing the machine parts out can be followed and, as a result, possible breakdown of the engine can be prevented or the optimum period for changing the oil can be determined. The aim of this paper is to explore the possibilities of using the image analysis combined with the method of analytical ferrography and suggest a tool for automated particle classification. Current methods of wear particle analysis are derived from the evaluation that does not offer an exact idea of processes that take place between the friction surfaces in the engine system. The work is based upon the method of analytical ferrography which allows to evaluate the state of the machine. The benefit of use of classifiers defined in this wirk is the possibility of automated evaluation of analytical ferrography outputs; the use of them eliminates the crucial disadvantage of ferrographical analysis which is its dependence on the subjective evaluation done by the expert who performs the analysis. Classifiers are defined as a result of using the methods of machine learning. Based on an extensive database of particles that was created in the first part of the work, the classifiers were trained as a result, they make the evaluation of ferrographically separated abrasion particles from oils taken from lubricated systems possible. In the next stage, experiments were carried out and optimum classifier settings were determined based on the results of the experiments.
|
|
Point and Line Parameterizations Using Parallel Coordinates for Hough Transform
Juránková, Markéta ; Kälviäinen, Heikki (referee) ; Kittler, Josef (referee) ; Herout, Adam (advisor)
Tato dizertační práce se zaměřuje na použití paralelních souřadnic pro parametrizaci čar a bodů. Paralelní souřadný systém má souřadnicové osy vzájemně rovnoběžné. Bod ve dvourozměrném prostoru je v paralelních souřadnicích zobrazen jako přímka a přímka jako bod. Toho je možné využít pro Houghovu transformaci - metodu, při které body zájmu hlasují v prostoru parametrů pro danou hypotézu. Parametrizace pomocí paralelních souřadnic vyžaduje pouze rasterizaci úseček, a proto je velmi rychlá a přesná. V práci je tato parameterizace demonstrována na detekci maticových kódů a úběžníků.
|
|
Network Architecture and Interconnection of Embedded Systems
Trchalík, Roman ; Drábek, Vladimír (referee) ; Srovnal, Vilém (referee) ; Švéda, Miroslav (advisor)
The thesis focuses on the architecture of embedded systems. It summarizes the current state of accepted standards from IEEE 1451 family, which deals with creating an environment for the sensors and their involvement in various networks. These standards describe the open, network-independent communication architecture for a sensor-based system. One of the main outcomes of this work is the architectures presented as case studies, which can be used as design patters for embedded applications. They are demonstrated on ZigBee technology suitable mainly for small devices with very low power consumption. Based on these studies the new design of universal gateway was proposed. Its major advantage is that it allows interconnection of the endpoints based on different sensor network technologies. Additionally, the thesis deals with modifying the routing protocol of ZigBee network in order to reduce power consumption required to transmit one data packet.
|
|
Výsledky účtu kultury ČR za rok 2012
Český statistický úřad
Účet kultury ČR byl poprvé zpracován v ověřovacím provedení za referenční rok 2009. V průběhu sestavování účtu i v rámci hodnocení jeho výsledků za tento rok a za léta následující se ukázalo, že některé předpoklady a záměry obsažené v původním metodickém manuálu k účtu nemohou být zcela naplněny, resp. musí být poopraveny. Srovnávání výsledků účtů kultury v časové řadě je prozatím velmi problematické.
Fulltext:  PDF
|
|
Project management in selected company
POKORNÝ, Radek
This work deals with project management in chosen company. It has two parts. The first part is theoretical, which is focused to theoretical treatment of the subject. It explains what is the project, management of projects, organizations of projects, processes of project management, what is target of project, communication, control, changes and risks and more. In the practical part I focused to concrete company and project management and than I analyzed concrete project. Name of the mentioned company is OHL ŽS, a.s. It is company from Spain, which acts all over the world. In the Czech Republic has the base in Brno. This company has several divisions and every of them is focused to different professional architecture. I have chosen division of structural engineering. This division builds all kinds of buildings. It could be construction of new buildings or reconstruction. To analysis of chosen project I used various business documents, contracts with investor or suppliers, document which include billing, timetable. I especially used my experience with projects of this company, and I was part of this project. Name of this project is Reconstruction of cladding including replacement windows and insulation. During the analysis of project I found a couple major gaps. If we could avoid these gaps, we could increase profit. These graphs is especially in management. At the beginning there were appointed two temporary construction managers. They doesn't care about result project, because they knew that they will not be to the end of the project. These gaps are because there is missing motivation system. Project manager can´t affect results of employees. It doesn´t depend on performance of employees, they always has the same wages. For elimination of these gaps I proposed several suggestions for improvement. The first suggestion is modification and extension of motivation system. New motivation system include personal evaluation. This evaluation depends on performance of employee. The second part is bonus from over profit. The next suggestion is make a new working position. This position would take care about controlling and project documentation. During the building project, especially at the end is construction manager very busy. It depend of decision of construction 63 manager what kind of activity will have prefer. Project documentation and administration or controlling of building works. If they are doing everything correct and technology are respect. Suggested position would take care about invoices, real work, which is done, project documentation, controlling of budget. The third suggestion is purchase of small machinery such as chipping hammers and drills. At this time they rent all devices. Rent is higher than purchase price. The last suggestion is use credit to restoration of fleet. At this time they have obsolete fleet, because the bought all cars by cash. It is not conveniently.
|
|
The reflection of František Bakule's work in a relation to a current special educational practice
BALÍKOVÁ, Tereza
František Bakule was a significant Czech teacher during the first half of the 20th century. He was known as the first director of the "Jedlicka Institute in Prague" as well as the founder of so-called "Bakule´s Institute" as well as one of the few representatives of the "Czech alternative approach towards education" which is very well recognized all around the world. His legacy and teachings, however, are currently not being developed on the systematic level and neither they are being put into practise by Czech professional mainstream educational community. We also need to mention that is not used by even the stream of special education, in contrast to many foreign alternative pedagogical trends, which are gaining popularity and are generally applied with success. The aim of this thesis is therefore to analyse the work of Frantisek Bakule through the prism of contemporary school educational environment with emphasis on the education of students with disabilities. The first chapter is devoted to outlining the life journey of Frantisek Bakule, particularly focusing on the major milestones that influenced the formation of his personality, his ideas, inspiration and motivation which was reflected in his teachings and then in his very own coherent concept of education. To be specific, we are introduced to his family background and a significant part is then devoted to description of Frantisek´s experience as a teacher, including stages of operating in Jedlicka´s Institute and in his own "Bakule´s institute". The second part is then focused solely on Bakule´s specific educational concept. First, the core principles of the concept are defined. Later parts then talk about Bakule´s original curriculum and a his proposal of an ideal classroom environment. The text also contains a detailed description of how Bakule approached several subjects, which were at the core of his teaching concept, namely "Work activities", "Music education" and "Arts". Original teaching practices are analysed by using current teaching methodology and terminology. Due to the identified aim and goals of the thesis, the third chapter analyses the current concept of education of the above, according to Bakule´s core areas and principles. The text is designed specifically to be subsequently reflecting the work of Frantisek Bakule from the perspective of today's teaching methods, namely the methods of special education. The idea is to define common points and possible differences and uncover hidden inspirational potential, which is then the main content of the fourth and final chapter. Based on the analysis and all its subsequent reflections, the final chapter tells us that although Bakule´s educational goals don´t differ too significantly from the current concept embedded in the relevant framework of educational programs, to achieve such goals we are currently using very different techniques and methods in comparison to Bakule´s ways. Even though Bakule himself tested and verified all of his concepts in practice, which can be very simply described as "do not teach students about life and work, but through life and work", and these concepts also have been proven correct by various subsequent results of psychological researches, the current system still doesn´t draw from them too much. From all the above it is quite obvious that the legacy of life´s work of Frantisek Bakule is currently not utilized nor it is being appreciated by our professional pedagogical community. On the other hand, we need to note that it may also be due to the level of fragmentation in which his concept and materials were preserved to the present days.
|
|
A historical view of the army nurse profession.
PAVLÍKOVÁ, Andrea
The thesis deals with the profession of a military nurse. We can assert that the official study of military, non-medical health-care related qualifications and its use in practice not only for military purposes dates back to the fifties of the last century. However, women as health care professionals, consequently in uniforms, have always been an actual issue. The development of health care activities always existed, however, we must not neglect influence of scientific and medical findings. The historical timeline of development of medical care in the battle field was recorded and ranges from pre-historical healing. The way of Christian medicine was negatively influenced by the Catholic Church. The dark period of the Middle Ages had actually wrested medical performance from the hands of specialists and the suffering were left to the "tender" mercies of the priests. The following part of the thesis concerns modern medicine where enlightenment reforms were exercised. Some of the original six-month courses for military surgeons were organised in this period of time; they weretransformed into Military Surgical Academy, out of which the famous Josefinum originated. A expression of humanity which supported a form of health care of war veterans was demonstrated by constructing buildings for invalid people. The second half of the nineteenth century is characterized by the phenomenon of the presence of nuns in military hospitals. This study goes further in depth of professionally organized healthcare right in the battle field, which dates back from the era of wars in the Crimea.This stage describes the transformation of caring into nursing which requires the necessity of specialized preparation of persons providing nursing practice. In addition, Henry Dunant engraved himself into the history of the profession of a nurse, as the founder of the Red Cross, who first trained health care professionals for working within armed intentions of the state. The continuation of this action sketches out the process of providing first aid in principal armed conflicts of the twentieth century. It describes the functioning of commander operated military health service of that time. WWI drove Czech medical staff to both sides of the front where they provided medical help to the injured. Nurses of the WWII already performed their duties in uniforms as the rightful members of the army. The thesis also mentions post-war usage of military health care professionals in secret foreign missions and their specialized erudition.Last but not least, it marginally discusses contemporary possibilities of modern health care service of the Army of the Czech Republic. The goal of the endeavours of writing this thesis was to chart out clearly the development of the profession of a military nurse within the historical context, focusing mainly on women coming from Czech regions. In order to make the history background concerning specific female participants of the world war conflicts understandable to the reader, this paper reports, in broader extension, peculiar medical and nursing findings, already from the era of prehistoric civilisations. The history study method were applied for the purpose of the theoretical thesis. The methodology is based on searching, studying, sorting and the consecutive systematic objective describing of the events from the past times with the intention to propose comprehensive report on the subject given. It was necessary to study inexhaustible amount of sources to obtain awareness of historical connections. Factual information was derived by analysing of primary and mainly secondary documents. The thesis sketches out histories of military health care and the profession of a military health care professional stemmed from the exploration of appropriate written sources and conclusion of the basic findings. The intentions of the work are not only to clarify the past but also to contribute to solutions of every-day issues.
|
|
Supervision in psychiatric nursing
RŮŽIČKOVÁ NEUŽILOVÁ, Michaela
Basic theoretical background The theoretical part of the thesis explores the issue of supervision and focuses on psychiatric nursing. It is divided into several parts. The first part is focused on supervision, briefly characterizes supervision as such, then it describes its divisions, functions and methods. It also explores the participants of supervision, the agreement on supervision, transcultural supervision and Balint groups. The following part describes historical development of psychiatric nursing, briefly presents the personality of Joyce E. Travelbee. In the conclusion of the theoretical part of the thesis the problems of education and competence of nurses in psychiatric care are introduced, marginally mentioning the Turku declaration. The aim of the work The main aim of the thesis is to investigate the awareness of nurses working in psychiatric care of the clinical supervision options. The task of the second objective is to find out the opinion on supervision of nurses working in psychiatric care. The third objective is focused on means to assist nurses working in psychiatric care in their personal development and growth within their practices. The purpose of the fourth objective is to find experience with supervision of nurses working in psychiatric care. The methods used Qualitative investigation was chosen for the empirical part of the thesis. The method used for data collection was in the form of semi-structured interview. The interviews with the respondents were taken down using a voice recorder and transcribed, qualitative data was then analyzed by pencil and paper encoding technique and semantically organized into 27. groups of categorization. The selection of a research sample was intentional, consisting of twelve nurses working in psychiatric care in the Czech Republic. Results The research focused on nurses who do not have personal experience with supervision revealed that they have certain awareness of the supervisory process, however not quite sufficient to be able to describe the nature and function of supervision in its entirety. Their knowledge is rather theoretical. They understood supervision as help to solve disharmonious relationships in the workplace, as well as it could improve communication skills of the nurses, it would also assist in dealing with crisis intervention and prevent burnout syndrome. The results regarding nurses who do not participate in the supervisory process clearly indicated that they have insufficient support and the opportunity for both their professional and personal growth in their workplace, while this important could be solved by supervision. The research, which covered only nurses who have had personal experience with supervision and regularly participate in it, showed that their knowledge and skills related to the supervision process are quite sufficient to be able to understand and use supervision practically in the whole range. These nurses sees supervision as a benefit that would allow them not only to understood themselves, but also to learn how to manage challenging situations that are a part of their profession. Supervision gives them confidence, provides support and teaches them to deal with people who are part of their work process. Supervision has become a tool for preventing burnout and showed them how to use their own potential effectively. Conclusion This thesis is focused on the use of supervision in psychiatric nursing. Working with mentally challenged patients is very demanding, therefore supervision plays its justified role there. If you do not know yourself and you are not able to solve your own problems, you can never effectively and comprehensively address the problems of others, who are often desperately waiting for your help. The results will be presented at professional seminars designed not only to nurses working in psychiatric care.
|
guest ::
