|
Energy absorption of cellular foams in high strain rate compression test
Králík, V. ; Němeček, J. ; Jíra, A. ; Fíla, Tomáš ; Zlámal, P.
Aluminum foams are structural materials with excellent energy absorption capacity jointed with very low specific weight and high stiffness. Products of aluminum foams are used in a wide range of structural and functional applications (e.g. as a part of composite protection elements) due to its attractive properties. Full characterization of deformation behaviour under high-strain rate loading is required for designing these applications. The aim of this study is to compare stress-strain behaviour and energy absorption of the aluminium foam structure with conventional energy absorbing materials based on polystyrene and extruded polystyrene commonly used as protective elements. The compressive deformation behaviour of the materials was assessed under impact loading conditions using a drop tower experimental device.
|
|
Fiscal rules in selected EU countries between 2004-2015: sensible method for consolidation of public finances or fad of politicians?
Veselý, Lukáš ; Strejček, Ivo (advisor) ; Chmelová, Pavla (referee)
The subject of fiscal rules is very topical issue. The rise of public debt in certain developed countries resulted in what is sometimes called "debt crisis". Debt of those countries which is higher than their annual gross domestic product is viewed as unpayable by some economists. The main objective of this thesis has been to prove or disprove hypothesis that the fiscal rules studied in this paper are an effective solution for public finance consolidation. This verification was based on the analysis of fiscal rules functioning in selected countries between 2004 and 2015. As per results of analysis the paper aims to give recommendations for the Czech financial constitution proposal. The actual results of inquiry proved the hypothesis. Well-chosen fiscal rules are the right way towards fiscal consolidation, provided they are observed. Fiscal rules making thus requires an emphasis to be placed on the well-formulated exit clauses altogether with prospective sanctions. The current Czech financial constitution proposal is built on the correctly picked fiscal rule type, although the reference value lacks economic sense and it would not lead, with a high degree of probability, towards fiscal consolidation.
|
|
Use of Interest Rate Models for Interest Rate Risk Management in the Czech Financial Market Environment
Cíchová Králová, Dana ; Arlt, Josef (advisor) ; Cipra, Tomáš (referee) ; Witzany, Jiří (referee)
The main goal of this thesis is to suggest an appropriate approach to interest rate risk modeling in the Czech financial market environment in various situations. Three distinct periods are analyzed. These periods, which are the period before the global financial crisis, period during the financial crisis and in the aftermath of the global financial crisis and calming subsequent debt crisis in the eurozone, are characterized by different evaluation of liquidity and credit risk, different relationship between financial variables and market participants and different degree of market regulations. Within this goal, an application of the BGM model in the Czech financial market environment is crucial. Use of the BGM model for the purpose of predicting a dynamics of a yield curve is not very common. This is firstly due to the fact that primary use of this model is a valuation of interest rate derivatives while ensuring the absence of arbitrage and secondly its application is relatively difficult. Nevertheless, I apply the BGM model to obtain predictions of the probability distributions of interest rates in the Czech and eurozone market environment, because its complexity, direct modeling of a yield curve based on market rates and especially a possibility of parameter estimation based on current swaptions volatilities quotations may lead to a significant improvement of predictions. This improvement was also confirmed in this thesis. Use of swaptions volatilities market quotations is especially useful in the period of unprecedented mone- tary easing and increased number of central banks and other regulators interventions into financial markets that occur after the financial crisis, because it reflects current market expectations which also include future interventions. As a consequence of underdevelopment of the Czech financial market there are no market quotations of Czech koruna denominated swaptions volatilities. I suggest their approximations based on quotations of euro denominated swaptions volatilities and also using volatilities of koruna and euro forward rates. Use of this approach ensures that predictions of the Czech yield curve dynamics contain current market expectations. To my knowledge, any other author has not presented similar application of the BGM model in the Czech financial market environment. In this thesis I further predict a Czech and Euro area money market yield curve dynamics using the CIR and the GP models as representatives of various types of interest rates models to compare these predictions with BGM predictions. I suggest a comprehensive system of three criteria, based on comparison of predicti- ons with reality, to describe a predictive power of selected models and an appropria- teness of their use in the Czech market environment during different situations in the market. This analysis shows that predictions of the Czech money market yield curve dynamics based on the BGM model demonstrate high predictive power and the best 8 quality in comparison with other models. GP model also produces relatively good qua- lity predictions. Conversely, predictions based on the CIR model as a representative of short rate model family completely failed when describing reality. In a situation when the economy allows negative rates and there is simultaneously a significant likelihood of their implementation, I recommend to obtain predictions of Czech money market yield curve dynamics using GP model which allows existence of negative interest rates. This analysis also contains a statistical test for validating the predictive power of each model and information on other tests. Berkowitz test rejects a hypothesis of accurate predictions for each model. However, this fact is common in real data testing even when using relatively good model. This fact is especially caused by difficult fulfilment of test conditions in real world. To my knowledge, such an analysis of the predictive power of selected interest rate models moreover in the Czech financial market environment has not been published yet. The last goal of this thesis is to suggest an appropriate approach to obtaining pre- dictions of Czech government bonds risk premium dynamics. I define this risk premium as a difference between government bond yields and fixed rate of CZK IRS with the same length. I apply the GP model to describe the dynamics of this indicator of the Czech Republic credit risk. In order to obtain a time series of the risk premium which are necessary for estimation of GP model parameters I firstly estimate yield curves of Czech government bonds using Svensson model for each trading day since 2005. Resulting si- mulations of risk premium show that the GP model predicts the real development of risk premiums of all maturities relatively well. Hence, the proposed approach is suitable for modeling of Czech Republic credit risk based on the use of information extracted from financial markets. I have not registered proposed approach to risk premium modeling moreover in the Czech financial market environment in other publications.
|
|
A Comparison of Preconditioning Methods for Saddle Point Problems with an Application to Porous Media Flow Problems
Axelsson, Owe ; Blaheta, Radim ; Hasal, Martin
The paper overviews and compares some block preconditioners for the solution of saddle point systems, especially systems arising from the Brinkman model of porous media flow. The considered preconditioners involve different Schur complements as inverse free Schur complement in HSS (Hermitian - Skew Hermitian Splitting preconditioner), Schur complement to the velocity matrix and finally Schur complement to a regularization block in the augmented matrix preconditioner. The inverses appearing in most of the considered Schur complements are approximated by simple sparse approximation techniques as element-by-element and Frobenius norm minimization approaches. A special interest is devoted to problems involving various Darcy, Stokes and Brinkman flow regions, the efficiency of preconditioners in this case is demonstrated by some numerical experiments.
|
|
STRAIN ENGINEERING OF THE ELECTRONIC STRUCTURE OF 2D MATERIALS
del Corro, Elena ; Peňa-Alvarez, M. ; Morales-García, A. ; Bouša, Milan ; Řáhová, Jaroslava ; Kavan, Ladislav ; Kalbáč, Martin ; Frank, Otakar
The research on graphene has attracted much attention since its first successful preparation in 2004. It possesses many unique properties, such as an extreme stiffness and strength, high electron mobility, ballistic transport even at room temperature, superior thermal conductivity and many others. The affection for graphene was followed swiftly by a keen interest in other two dimensional materials like transition metal dichalcogenides. As has been predicted and in part proven experimentally, the electronic properties of these materials can be modified by various means. The most common ones include covalent or non-covalent chemistry, electrochemical, gate or atomic doping, or quantum confinement. None of these methods has proven universal enough in terms of the devices' characteristics or scalability. However, another approach is known mechanical strain/stress, but experiments in that direction are scarce, in spite of their high promises.\nThe primary challenge consists in the understanding of the mechanical properties of 2D materials and in the ability to quantify the lattice deformation. Several techniques can be then used to apply strain to the specimens and thus to induce changes in their electronic structure. We will review their basic concepts and some of the examples so far documented experimentally and/or theoretically.
|
| |
|
ELECTRON BEAM REMELTING OF PLASMA SPRAYED ALUMINA COATINGS
Matějíček, Jiří ; Veverka, J. ; Čížek, J. ; Kouřil, J.
Plasma sprayed alumina coatings find numerous applications in various fields, where they enhance the properties of the base material. Examples include thermal barriers, wear resistance, electrical insulation, and diffusion and corrosion barriers. A typical structure of plasma sprayed coatings, containing a multitude of voids and imperfectly bonded interfaces, gives them unique properties - particularly low thermal conductivity, high strain tolerance, etc. However, for certain applications such as permeation barriers or wear resistance, these voids may be detrimental.\nThis paper reports on the first experiments with remelting of plasma sprayed alumina coatings by electron beam technology, with the purpose of densifying the coatings and thereby eliminating the voids. Throughout the study, several parameters of the e-beam device were varied - beam current, traverse velocity and number of passes. The treated coatings were observed by light and electron microscopy and the thickness, structure and surface morphology of the remelted layer were determined and correlated with the process parameters. Based on the first series of experiments, the e-beam settings leading to dense and smooth remelted layer of sufficient thickness were obtained. In this layer, a change of phase composition and a marked increase in hardness were observed.\n
|
| |
|
Message nurses and ward sister in practice.
NOVÁKOVÁ, Jana
The ward sister round presents an integral part of the nursing profession. The ward sister round comprises a regular visit of the nurse directly at the patient´s bed. Its objective consists in determining and satisfying the unsaturated needs of patients, further in ensuring and providing a high quality and efficiency nursing care in a close link with medical care. Nursing handover can be divided into two main sections: written and oral handover. The oral handover takes place directly in the patients´/clients´ room under the use of nursing documentation. Its advantage consists in the direct involvement of the patient/client in the handover process. The written handover is then entered by the nurses into the Handover Book. The significance of my diploma work consists in increasing the nurses´ standard of knowledge related to the modernization of ward sister rounds and nursing handover as an integral part of the nursing profession.
|
|
Sorption and Stabilization of Metals/Mettalloids by Innovative Synthesized Sorbent Amochar.
Ouředníček, P. ; Trakal, L. ; Komárek, M. ; Pohořelý, Michael
Remediation of contaminated soil which is based on stabilization and immobilization of potential\nhazardous substance by sorption materials has been studied intensively nowadays. Biochar – activated organic carbon belongs to this group of stabilizing agents which can adsorb wide range of contaminants, including metals/metalloids. Surface area of the biochars is quite large in general and functional groups (e.g. COO–) can form chelates or alkaline elements on the surface, which is represented by cation exchange capacity. Altogether with the high pH values (7.00 – 10.00), biochars are quite effective sorbents and can adsorb metals/metalloids from the solution (ground water), especially in acidic soils (in the environments affected by intensive mining activities). Sorption\neffectiveness can be increased (especially for As (V) or Cr (VI) sorption) by modification of biochar by various types of secondary oxides. Innovative sorbent AMOchar (AMO + biochar) has been synthesized currently. The product was prepared by adding of biochar to the reaction solution during amorphous manganese oxide (AMO) synthesis. The AMOchar was formed mainly by Mn-oxalates which had coated surface of the pristine biochar. AMOchar composite was able to remove significantly higher amounts of various metal(loid)s from the solution despite the rather high pH of the material. Sorption effectiveness was high not only in case of Pb (II) sorption (almost 99%), and Cd(II) (51.2%), but also a very high amount of As(V), 91.4%. Additionally, both AMOchar composite was able to reduce Mn leaching. This can avoid potential post-contamination caused by the dissolution of less stable Mn-oxalates as observed in the pure AMO.
Fulltext: content.csg - PDF Plný tet: SKMBT_22316111113040 - PDF
|