| |
|
Selected social determinants of health in immigrants in some regions of the Czech Republic
BRABCOVÁ, Iva
The main aim of the research was to map the influence of selected social determinants on health of target immigrant groups. The method was based on the concept of ten social determinants of health as introduced by Wilkinson and Marmot (2003). The quantitative method used were interviews. The survey was carried out in the period from January 2010 to December 2012. Data collection was carried out in two stages. In the first stage, the influence of two social determinants of health (nutrition and addiction) on the respondents' state of health was investigated. The second stage of the survey focused on working conditions and on how respondents can use health care. 246 immigrants were interviewed in the first stage of the survey. They were from the following regions: South Bohemian Region, the capital Prague and Vysočina Region. 236 immigrants from two regions (South Bohemian Region and the capital Prague) were addressed in the second stage of the survey. They were legally settled immigrants in the age group 18 65, of Vietnamese, Mongolian and Ukrainian nationality. The results of the survey clearly show that the target immigrant groups are more exposed to unfavorable working conditions than majority population. Compared to the Czech population the target immigrant groups show statistically significant differences especially in the area of excessive workload and discrimination in the workplace. Increasing incidence of unfavorable working conditions resulted in significant increase in occupational diseases. The factors influencing use of healthcare by immigrants are the type of health insurance, length of residence, sex and knowledge of Czech language. Immigrants who had entered the system of public health insurance used healthcare much more frequently than immigrants with commercial health insurance. Male immigrants smoke and drink alcohol much more heavily than female immigrants. The young generation of immigrants (aged 18 to 29) smoke statistically more significantly than the middle-aged and older generation of immigrants. Middle-aged immigrants (aged 30 to 50) consume more wine and spirits. Their health was perceived subjectively as "worse" by those respondents who at the same time mentioned chronic pain and psychic stress in the workplace. The following measures could lead to elimination of social inequality and to improvement of immigrants' situation in the Czech Republic: equal working conditions for immigrants and Czech employees, improvement of immigrants' knowledge of Czech, shortening of the overall time for obtaining permanent residence, simplification of the terms for gaining citizenship, guarantee of access to public healthcare to all legally settled immigrants.
|
|
Estimate VAT selection after the introduction of electronic evidence of sales in the Czech Republic from 2016
Píchal, Dominik ; Pikhart, Zdeněk (advisor) ; Zeman, Martin (referee)
The Bachelors Thesis focuses on the topic of the tax collection and other subjects that are related to the topic like underground economy, tax evasion and other instruments that lead to the efficiency improvement of the tax collection. Electronic evidence of taxes in Czech is the kind of the instrument that aims towards the increase of the tax collection and improvement of the control of the taxpayer. Comparation and analysis was used for its methodological basis. Analysis and comparison serves as the proof that the thesis, of the electronic evidence of taxes beeing an effective instrument, is correct. The merit of the thesis is an overall description of the chosen phenomena affecting the tax collection, description of the models of electronic evidence of taxes from abroad and most importantly description and analysis of the upcoming czech one.
|
|
IT requirements management of insurance company
Dvorský, Petr ; Bruckner, Tomáš (advisor) ; Jungmannová, Barbora (referee)
The first part of thesis deals with theoretical knowledge, thus defining the concepts of recommendations from the field of requirements management. The second part focuses on the identification, analysis and subsequend design solutions to problems arising from working with the requirements. Methods for identifying problems are carried out workshop, participant observation and interviews with employees from the IT sector of the insurance company. The outputs of this work are proposals for improving requirements management, some of them are successfully applied in Kooperativa. The first draft, which was applied to create a process library. Further, of four different types of prioritization was selected and applied method that is defined by ITIL. Other outputs are design of new user interface of requirements software and starting to design a Change Advisory Board, which is compared to ITIL enhanced with additional features. Further was established Business Consultant Department, which has task of efficiently collecting client requirements and the supporting documents were created for this department.
|
| |
|
Initial Stage of Mutual Diffusion of Carbide in Iron
Čermák, Jiří ; Král, Lubomír
Initial stage of mutual diffusion close to carbon/iron interface was investigated in the present work. SIMS technique of concentration profiles enabled to study the carbon redistribution in the very early stages, when the diffusion process occurs – at least partly – in regions, where the carbon concentration exceeds the carbon concentration limit. It was observed that carbon diffusion coefficients are much lower under such conditions, than in Fe matrix with equilibrium carbon concentration. The measured carbon diffusion coefficients approached values reported for carbon diffusion in carbides.
|
|
Výběr a implementace open source nástroje pro řízení portfolia projektů
Marek, Jan ; Chlapek, Dušan (advisor) ; Kučera, Jan (referee)
Methods and ways of implementation of changes and innovations in companies through project management are in today's society very well established. There exists methodologies, techniques and tools for the management of individual projects. However in a role of project manager, I very often faced the fact that companies are performing the project portfolio management in very intuitive way. This in itself leads to failed and prematurely terminated projects, initiation of the wrong projects or realisation of correct projects, but at the wrong time. Very often I have also recognized, that there is lack of awareness of fact, that there are also Open Source applications that can help with the organization's portfolio. This thesis deals with the definition of requirements, search and selection of proper OSS application and subsequent implementation. In the first part of this thesis I prepare a theoretical framework about PPM, and on that basis then identify and verify a set of requirements for selection of right OSS PPM application. The next section of thesis describes searching for suitable applications from a variety of sources, assessment against the requirements and the final selection. In the last part the implementation project is drafted, which aims to serve other colleagues in project management as one of the possible implementation paths. The outputs are then continuously confronted with experts in matter of projects and project management in the field of IT in order to maximize symbiosis between theory and real life experiences. Virtually every project management methodology defines the collection of already-proven techniques, best practices or lessons learned from the previous similar implementations. The main contribution of this thesis I see in fact that it contains not only the design of the project implementation, but also describes a logical path, what leads to the result. Therefore this thesis could be used as a base or discussed best practice, when a project of implementation of PPM application in place.
|
|
STRAIN ENGINEERING OF THE ELECTRONIC STRUCTURE OF 2D MATERIALS
del Corro, Elena ; Peňa-Alvarez, M. ; Morales-García, A. ; Bouša, Milan ; Řáhová, Jaroslava ; Kavan, Ladislav ; Kalbáč, Martin ; Frank, Otakar
The research on graphene has attracted much attention since its first successful preparation in 2004. It possesses many unique properties, such as an extreme stiffness and strength, high electron mobility, ballistic transport even at room temperature, superior thermal conductivity and many others. The affection for graphene was followed swiftly by a keen interest in other two dimensional materials like transition metal dichalcogenides. As has been predicted and in part proven experimentally, the electronic properties of these materials can be modified by various means. The most common ones include covalent or non-covalent chemistry, electrochemical, gate or atomic doping, or quantum confinement. None of these methods has proven universal enough in terms of the devices' characteristics or scalability. However, another approach is known mechanical strain/stress, but experiments in that direction are scarce, in spite of their high promises.\nThe primary challenge consists in the understanding of the mechanical properties of 2D materials and in the ability to quantify the lattice deformation. Several techniques can be then used to apply strain to the specimens and thus to induce changes in their electronic structure. We will review their basic concepts and some of the examples so far documented experimentally and/or theoretically.
|
|
ELECTRON BEAM REMELTING OF PLASMA SPRAYED ALUMINA COATINGS
Matějíček, Jiří ; Veverka, J. ; Čížek, J. ; Kouřil, J.
Plasma sprayed alumina coatings find numerous applications in various fields, where they enhance the properties of the base material. Examples include thermal barriers, wear resistance, electrical insulation, and diffusion and corrosion barriers. A typical structure of plasma sprayed coatings, containing a multitude of voids and imperfectly bonded interfaces, gives them unique properties - particularly low thermal conductivity, high strain tolerance, etc. However, for certain applications such as permeation barriers or wear resistance, these voids may be detrimental.\nThis paper reports on the first experiments with remelting of plasma sprayed alumina coatings by electron beam technology, with the purpose of densifying the coatings and thereby eliminating the voids. Throughout the study, several parameters of the e-beam device were varied - beam current, traverse velocity and number of passes. The treated coatings were observed by light and electron microscopy and the thickness, structure and surface morphology of the remelted layer were determined and correlated with the process parameters. Based on the first series of experiments, the e-beam settings leading to dense and smooth remelted layer of sufficient thickness were obtained. In this layer, a change of phase composition and a marked increase in hardness were observed.\n
|
| |
guest ::
