| |
|
Evaluation and motivation in public administration
Vašíčková, Natálie ; Mitwallyová, Helena (advisor) ; Vláčil, Jan (referee)
The theme of the bachelor thesis is the evaluation and motivation of employees in public administration. The introductory part outlines the evaluation and motivation of employees on a general level, and then describes the specifics applicable for public administration. The practical part is focused on the evaluation and motivation systems used at selected institutions of public administration. It aims to assess these systems, suggest possible recommendations and find out whether the systems in use include modern management methods, such as evaluation interviews, competency models and regular system of employee evaluation as such. The research method consisted of interviews with human resources managers at selected institutions of public administration. Complementary information was obtained from materials created by these institutions themselves. All institutions of public administration are governed by Act No. 234/2014 Coll. on Civil Service, enshrining the evaluation of state employees. However, it depends on whether employees are evaluated formally, or if additional evaluation tools beyond the framework of the law are deployed, e.g. competency models. Officials of territorial authorities are subject to Act No. 312/2002 Coll., which does not explicitly define employee evaluation, yet employees are evaluated at many regional as well as local administration units. The results of the research survey confirmed that modern management methods are used in public administration and that the evaluation systems do not have any significant shortcomings.
|
|
Description of the older school age boys dental injuries in České Budějovice region and proposal of the health education materials.
TOBOLKOVÁ, Andrea
Thesis deals with the problem of the older school age boys dental injuries in České Budějovice region. The injury means: ?sudden damage of the health by effect of external factors which exceed adaptation options of the human body?. In the sphere of dental injuries the children is the most jeopardized group of population. The most often reason for the children injuries is their imperfect stability. In case of older children and young people there are injuries mostly caused by sport. Teoretical part of my thesis is focused on definition of older school age as well as on anatomy and teeth physiology. The part of thesis also is the enumeration of dental injuries and its treatment. I also mention prosthetic dentistry and the influence of accidents on individual physical and mental health. At the end of teoretical part there is mentioned process of the injured examination, posttraumatic dental hygiene and patient nutrition after teeth accident. Research part finds with the help of questionnaire survey the kinds of dental accidents, circumstances of injuries formation and the influence of accidents on individual physical and mental health in specific age category. The questionnaire survey was evaluated and processed in grafical part of thesis. The part of thesis also is health and educational material which helps to rise the quality of dental hygiene and also contributes to the prevention of dental accidents formation of second degree students at primary schools.
|
|
The creation of videotutorials for the University of Economics, Prague
Zeman, Ondřej ; Šedivá, Zuzana (advisor) ; Kupec, Michael (referee)
The purpose of this bachelor thesis is to acquaint readers with new possibilities of teaching by using information technology and its application, when making learning material. The main outputs of this thesis are video tutorials, which serve as an education support for the course 4IT110 Use MS Excel in business practice taught in the University of Economics, Prague. However, it may be useful to other students of different courses. The process of making tutorials is described from the very beginning by specifying methodology, creating model exercises, subsequent testing of tutorials by students and optimisation of videos according to their suggestions and comments.
|
|
Transport of Dangerous Substances in the Czech Republic
VANDAS, David
The topic of the diploma written assignment is "Transport of Dangerous Substances in the Czech Republic" and it was chosen for elaboration of the wholesome view on the road, train, ship and plane transportation of the hazardous materials and mixtures. These transportations represent a possible risk of damage to life, health, property or environment for the society. Hazardous materials and mixtures nowadays are being transported in large measures and there is an assumption in the future that the volume of the transported hazardous materials and mixtures will increase. For elaboration of this written assignment three hypothesis were given: a) Legal regulations of the European Union and the Czech Republic solve the problematic of the transportation of hazardous materials and mixtures well enough. b) The public has enough information about the transportation of the hazardous chemical substances or mixtures. c) People that work in the field of the transportation of hazardous materials or mixtures are well informed about the transportation of hazardous chemical substances or mixtures. For determining whether the legal regulations solve the problematic of the transportation of hazardous materials and mixtures well enough the literary sources which deal with this issue, legal regulations of the Czech Republic and the European Union and other international agreements were used. After working through these sources it was found out that the international, the EU and Czech legal regulations or agreements solve this issue well enough and emphasis is given on convergence of legal regulations of all transportations. Implementation of international agreements and legal regulations of the European Union into the legal regulations of the Czech Republic happens in the present time very fast and without failures. For figuring out the awareness of the public and awareness of the people working in the field of the transportation of hazardous materials and mixtures for the diploma written assignment on the topic of "The Transportation of Hazardous Materials and Mixtures on the Territory of the Czech Republic" there was a quantitative research made. The quantitative research was made with the help of handed out questionnaires. The public was represented by the employees of the Regional Municipalities of the Czech Republic. Both of the groups were given the same questionnaires. The results of the questionnaire research were evaluated, expressed in percentage and statistically assessed. For the statistical assessment the double selection T-test was used to find out whether the difference between the assessed groups is statistically important. People working in the transportation of hazardous substances and mixtures have sufficient information which was confirmed by the questionnaire research. By the made statistical assessment it was found out that the difference between the groups is statistically significant and so the public does not have sufficient information related to the transportation of hazardous substances and mixtures. Due to the results of the questionnaire research and mainly that the hypothesis b) - The public has enough information about the transportation of hazardous chemical substances or mixtures was not confirmed. In the conclusion of the written assignment there are a couple of suggestions for improvement of the awareness of the public. For example as a part of education at primary and high schools and training schools where this education is already running as a part of The Protection of Human during Incidents. This education has been going on since 2003. And that is why the older people in the public are not well met with this issue and they should be introduced to it by for example a media campaign by means of short TV spots on public television channels or by means of spots that already the Independent BESIP Department of the Ministry of Transportation makes up. These spots are called Besipky.
|
|
Rational numbers for the future teachers on primary school
SVITÁKOVÁ, Jana
This thesis presents comprehensive study material relating the subject of rational numbers for students trained to be teachers at primary school. I am mainly concentrating on qualities of racional numbers and their methodology in the theoretic part. I am checking the level of school knowledge in the subject of racional numbers in the operative part. I was concentrated on pupils at 2nd and 4th classes of Primary School in Choustník and on students of the pedagogical faculty at South Bohemia University in České Budějovice. Task collection for students trained to be teachers at primary school and also for teachers in profession is part of my thesis.
|
|
Optimalization of material flow in automotive industry
Kolář, Tomáš ; Jirsák, Petr (advisor) ; Vinš, Marek (referee)
This master thesis is focussed on optimalization of material flow in an automotive company. First part introduce theoretical background. Automotive industry and its actual trends on global markets. Follows short introduction of the company where project of this thesis was executed. Main theoretical part describes concept of lean management, its tools in practical examples, but it is also focussed on philosophical approach to the work and mindset of the company. Follows the aplication part based on theoretical background. The whole project of this master thesis is focussed on specific area called PC store. At first this area is showed in context of overall material flow. Shortly there are introduced processes and areas where full material packaging flows. Follows deeper analysis and optimalization of PC store itself. There are three approaches of stock and lead time reduction applied. Last part shows the comparison of initial and future state including performed changes.
|
| |
|
HYDROGENATION PROPERTIES OF BALL-MILLED Mg-Ti-C-Zr COMPOSITE
Král, Lubomír ; Čermák, Jiří ; Roupcová, Pavla
The hydrogen storage properties of ball-milled Mg-Ti-Zr-C composite (1.8 wt.% Ti, 1.9 wt.% Zr and 0.2 wt.% C) were investigated. It has been previously shown, that the addition of Ti, Zr and C improved its storage properties. This beneficial effect of additives upon hydrogen storage properties can be explained by catalysis by the particles rich in Ti or Zr located on the surface of Mg grains. They provide effective pathways for the hydrogen diffusion into the MgH2. The morphological and microstructural characteristics were investigated by scanning electron microscopy and by X-ray diffraction. The hydrogen sorption was measured by Sieverts method using Setaram PCT-Pro device. In this paper, sorption behaviour of the composite after ball-milling and after aging on the air was compared. The ball-milled composite adsorbed 3.5 wt.% H2 within 10 min at 623 K. However, hydrogen storage capacity of the composite aged on the air for 7 months remarkably decreased: The aged composite adsorbed within 10 min only 2 wt.% H2 at 623 K and the sorption capacity decreased from 4.7 wt.% H2 to 2.1 wt.% H2.
|
|
INFLUENCE OF LASER CUTTING AND PUNCHING ON MAGNETIC PROPERTIES\nOF ELECTRICAL STEEL M470-50A
Bulín, Tomáš ; Švábenská, Eva ; Hapla, Miroslav ; Ondrůšek, Č. ; Schneeweiss, Oldřich
Electrical steel M470-50A belongs to the most often used materials in electrical machines. Due to this fact, it is desirable to know the magnetic parameters after processing raw sheets into the required shape. Basic parameters of mechanical, electrical, and magnetic properties of the sheets are usually obtained from the producer but the magnetic properties are changing in dependence on additional machining processes. The aim of this study is to describe changes in parameters of magnetic behavior after punching, laser and spark cutting of the original sheets. The basic information of structure was obtained by optical and scanning electron microscopy. The magnetic parameters were acquired from the measuring of magnetic hysteresis loops in dependence on saturation fields and frequencies. The results are discussed from the point of view of applied\ncutting technology with the aim to obtain the best magnetic parameters and consequently a higher efficiency of the final product. Results can be used as input parameters in simulation of the electrical machine.
|
guest ::
