| |
| |
| |
|
Solution of bendig technology problems of thinn walled profiles
Matoušek, Karel ; Forejt, Milan (referee) ; Samek, Radko (advisor)
Reconnaissance of problems and parameters of square hollow profile bend. Finding (identification) of deformation of cross-section. Finding of suitability of unannealed material for component part. Finding of mechanical characteristics of welds and influence of their bend position. This finding was done on the basis of comparison of tensile tests and consequently aplicated to specific part where the suitability for use of unannealed material were proved.
|
|
Interaction between TiAl melt and coated oxide refractories
Dočekalová, Kateřina ; Dlouhý, Antonín ; Zemčík, L. ; Fiala, J.
The present study focuses on reactions between ceramic crucibles and molten TiAl intermetallics. Coating strategies are investigated that exhibit a potential in slowing down the decomposition of the crucible wall. Uncoated crucibles (system TiAl melt - Al2O3 crucible) and crucibles with the coat (system TiAl melt - CaO coat - Al2O3 crucible) were used in melting and casting experiments. The reference state of the coated crucible before the melting trial was also investigated. Results of the SEM, EDAX and X-ray diffraction analysis contributed to the identification of the reaction zone and its chemical composition. The melt contamination with oxide inclusions results from the erosion process in which individual components of the melt diffuse along grain boundaries of the refractory and activate chemical reactions that decompose the crucible wall. Assessment of thermodynamic parameters associated with the chemical reactions helped in identifying the nature of the erosion process.
|
|
Measurement of nucleation rate in corrossive mixtures
Krejčí, A. Petr
For a complete description of two-phase flow a basic informationabout liquid phase formation is needed. The information is fulfilled in terms ofnucleation rate and its dependency on quantities characteristic for gas-phaseflow. One of devices used for measuring of nucleation rate in multi-componentsystems of vapors and gases is a shock tube. Unique modification of this devicedesigned for measuring in chemically aggressive mixtures is described.
|
| |
|
Marketing Plan of MAGICAM HD SOLUTIONS, Ltd
Pařízek, Aleš ; Hesková, Marie (advisor) ; Harantová, Monika (referee)
The main goal of the bachelor study is to create functional marketing plan for year 2017 that is consistent with the existing long-term marketing strategy. This thesis is created for use in business company MAGICAM HD SOLUTIONS Ltd. The core of the thesis is devided into theoretical and practical part. The first part laid the foundations basis of the terms used in the marketing planning, it is described the relationship marketing strategy, plan and tactics and role in the functioning of the marketing plan of the company. The second part contains the characteristics of the company, the analysis of external and internal factors affecting the company, SWOT analysis, setting goals and designing procedures by which the company will achieved set go-als. The practical part also contains specific steps in the action programs and timetable. Finally the thesis evaluates individual parts and contribution to the company.
|
|
Propagation of inclined cracks to the interface of ceramic laminates
Novotná, Lenka ; Trunec, Martin (referee) ; Chlup, Zdeněk (advisor)
Composite materials with laminated structure provide advantages which are utilised during component design. Low density, temperature and chemical stability are the profitable properties predetermining application of ceramic laminates. The main obstacle for wide spread of ceramic materials is their inherent brittleness. Therefore, in this thesis, the crack propagation in ceramics laminates has been extensively studied. Laminated structures with various volume fractions of components (alumina and zirconia) were prepared by electrophoretic deposition. Evaluation of crack propagation through the interface and determination of basic mechanical properties was conducted on the basis of extensive literature search. Crack deflection originated in both presence of internal stresses and differences in elastic modulus during the crack interface passing was monitored. A special type of specimen geometry was employed with the aim to set arbitrary angle between crack and interface. It was experimentally found that the degree of crack deflection is dependent on entering angle and volume fraction of components. Higher crack deflection was already found in the bulk of the test piece comparing to the test piece surface. The 3D fracture surface reconstruction generated using laser confocal microscopy was used in this detailed crack propagation study. Further basic elastic and strength characteristics of laminates were determined and compared to those obtained from monolithic materials. The validity of the mix rule for elastic characteristics was confirmed by comparing of elastics modulus. The most reliable method for elastic modulus determination was marked the dynamic resonance method due to low scatter and consistency in measurement. The flexural strength of all laminates tends to be close to the flexural strength of the weakest component. Therefore the mix rule is not applicable for flexural strength estimation on the contrary of elastic characteristics. The change of component volume fraction leads only to change of flexural strength scatter. Thanks to gained knowledge about crack propagation and basic characteristic determination will be possible to design ceramic laminates more efficiently for given needs of application.
|
|
Kritérium stability bi-materiálového vrubu se dvěma singularitami
Klusák, Jan
Interfaces with a step change of material properties occur often in technical constructions. In combination with a sharp notch it usually leads to singular stress distribution in a vicinity of such a wedge. The existence of two singularities seems to be the main problem within study of this stress concentrator. The other problem is that each singularity does not correspond to particular mode of loading. The presented contribution studies stress distribution in a bi-material wedge vicinity and shows a method of solution of the problems in case of existence of multiple stress singularity
|
guest ::
