|
Analysis of the internal environment of a selected company
VOTAVOVÁ, Monika
The main aim of this bachelor thesis was to evaluate the present situation of a company by means of selected analyses of internal environment and to propose optimal strategy and possible changes for maintenance or improvement of market position upon the data found this way. An insight into the internal environment of selected company from the point of view of internal audit of resources, financial analysis and SWOT analysis is the contribution of the thesis.
|
|
Analysis of selected challenges when exporting fast-moving consumer goods from Mexico and suggestion of particular optimization
Kudelová, Jarmila ; Kolář, Petr (advisor) ; Staroba, Jaromír (referee)
This Master´s Thesis deals with the exportation of fast-moving consumer goods from Mexico. The theoretical part explains the concept of FMCG and describes the steps that should generally be followed when exporting FMCG from Mexico. Furthermore, the elements related to maritime transportation are described, because this type of transport of exporting from this country is used most often. Within the specific case of Corona, detailed logistics structure of the export process is displayed. By analysing its operation, the main challenges associated with carriers used for the export are identified and ultimately partial solutions that should be implemented to minimize the occurrence of problematic points are suggested.
|
|
Analysis of logistic processes in company Truhlárny, a. s.
Kubíček, Petr ; Cimler, Petr (advisor) ; Zeman, Jiří (referee)
This bachelor´s thesis describes logistics infrastructure and flows in Truhlárna, a. s. The thesis analyses all activities that are connected with logistics. Aim of this thesis is evaluation of logistics processes and suggestion of most suitable measures for optimization and effectivity improvements. The thesis contains theoretical and practical parts that are logically connected with each other and are based on the scientific literature and internal documentation of the company.
|
|
Aerodynamic design and analysis of "Twin Shark" glider
Krmela, Luděk ; Kouřil, Martin (referee) ; Popela, Robert (advisor)
The thesis contains determination of real aerodynamics characteristics of PW09-135 flap airfoil with help of calibration method via CFD, followed by accomplishment of CFD analysis of parts and the whole Twin Shark glider. Detailed research and optimization was made to flow field quality of fuselage and wing fuselage junction. On the basis of CFD solution was determine a stability control, static margin and angle of attack of a horizontal stabilizer. The thesis concludes an evaluation of results applicability in praxis.
|
|
The Study of Systém and Process optimization of Service operation
Prokeš, Viktor ; Havlásek, Roman (referee) ; Jurová, Marie (advisor)
This thesis is oriented on the automotive industry with the focus on the domestic producer of the vehicles – the Škoda Auto Company. It describes the subject of business in the mentioned company and subsequently it refers to the current trends of the automotive market in the Czech Republic. On the basis of the analyses` results of the after-sales services allied with usage of the Škoda-products it will propose their possible future progression. Thereinafter will the thesis concentrate on the description of the existing after-sales processes focused on the „through-pass“ of the vehicle through the authorised Škoda Auto service. It deals with the analysis of the service systems in detail using the tight cohesion of them. Modern technologies used in the current vehicles put significantly higher demands on their maintenance, which call for the continual optimization of the service processes with the maximal utilisation effort of the feedback. The appropriate personnel have become the necessity. For these purposes it will be recommended the introduction of the electronic multipurpose memory devices intended for the data collection. In the next step will the after-sale-service process be described with the focus on the usage of these electronic memory vehicle-keys with the reference to the procedural simplification of the maintenance operations. The final part of the thesis will evaluate the general contribution of the proposed resolution for the service processes as well as their users.
|
|
Participative management – key to minimaze conflicts between protection of biodiversity and socio-economic development of local communities
Těšitel, Jan ; Kušová, Drahomíra ; Matějka, K. ; Boháč, J. ; Bartoš, Michael ; Kopáčková, M. ; Moravcová, Jana ; Šrubař, Vladan
The project was aimed to propose a model of optimal coexistence of biodiversity protection and socio-economic development in large-scale protected areas. Its main output was identification of principles of participative management of protected areas and estimation of circumstances necessary for its practical implementation. The project focused on description of biodiversity in particular model areas, on eventuality of changes in biodiversity due to human activities and thus on identification of actual and potential conflicts. In parallel, selected parameters of quality of life of local population, behaviour the population and its relation to the Administration of protected area and to nature protection in general were studied. Analysis of behaviour of the administration of protected areas as social institution became also part of the project. The project was designed as empirical comparative study of three biosphere reserves (BR) - BR Šumava, BR Třeboňsko a BR Křivoklátsko.
|
|
Hospital strategy performance
Márová, Adéla ; Dvořáček, Jiří (advisor) ; Bláha, Martin (referee)
This master's thesis called Hospital strategy performance deals with the strategic analysis of České Budějovice Hospital in relation to cost efficiency in this company. Information were provided during the interview with the company CEO, MUDr. Břetislav Shon. Primary input for financial analysis purpose were taken from the annual reports of 2011-2015. The introduction defines strategy and strategic analysis and the master's thesis' aims are specified. The theoretical part is based on theoretical definition and methodology of strategic analysis, the analytical process is introduced, as well as results evaluation based on specialized publication. The practical part consists of the description of the current situation in Czech health care, company introduction and the strategic analysis of the company. The conclusion includes the strategic analysis evaluation and recommendation for next steps.
|
|
three-sied tipping body of trailer
Peňáz, Jan ; Hladký, Bohumír (referee) ; Škopán, Miroslav (advisor)
This diploma thesis deals with proposal three-side tipping body of tractor semi-trailer with maximum weight 23 tons. In beginning the thesis includes background research part and design of conception body inclusive back door. In the middle part thesis contains the strength calculations using the finite element method, shape optimization and check strength calculation. Strength checks consider especially deformation and strain analysis in different load angle states. The work is finished by analytical calculations included partial body of semi-trailer. Enclosed are graphic illustrations results in program ANSYS Workbench. Part of the thesis is also design documentation. Work is created in co-operation with company ZDT Ltd. Body is designed for universal for multipurpose versatile body carrier Mega 230.
|
|
Analysis of operation data for purposes of optimization
Slavíček, Martin ; Pavlas, Martin (referee) ; Touš, Michal (advisor)
This thesis deals with analysis of operation data for purposes of optimization. The thesis is divided into four chapters. First chapter focuses on present and future development in waste management legislation. It mainly deals with prevention, recycling and disposal of waste. Second chapter more closely describes waste-to-energy process. This chapter also describes the technology of municipal waste incinerator in Liberec, Termizo, a.s. Third chapter starts with description of tools used in design of the models based on operation data. Then the models for individual technological nodes are described. The last part is focused on building a complex model of Termizo using previous results.
|
|
Influence of a particullar heat on properties and structure of duplex steel welded joint
Němec, Karel ; Kubíček, Jaroslav (referee) ; Daněk, Ladislav (advisor)
The research project is focused on an influence of a particullar heat on properties and structure of duplex steel DIN 1.4462. Samples prepared by using different welding speeds 10, 15, 20, 25, 30 cm.min-1, were tested for tensile, metalographical analysis and hardness test. Experimental results proved the optimal welding speed for material with 2 mm thickness to be 15 cm.min-1. Usage of lower speed 10 cm.min-1 led to formation of hot cracks while higher speeds 20, 25, 30 cm.min-1 didn‘t cause material penetration.
|
guest ::
