National Repository of Grey Literature 14,305 records found  1 - 10nextend  jump to record: Search took 1.24 seconds. 

Advanced signal processing in composite material properties investigation
Blaháček, Michal ; Landa, Michal ; Zídek, Jan
Composite material parameters evaluation depends on our ability to simplify complex wave field. Fractional wave mode arrival usually evokes transient effects in the measured signal. In the paper new method of transient effects detection is discussed. The method is efficient tool for fractional wave mode detection and wave arrival time computation.

Plasma spraying from liquids: plasma liquid interaction and coating build up
Tesař, Tomáš ; Mušálek, Radek ; Medřický, Jan ; Lukáč, František
Plasma spraying from liquid feedstocks is a rapidly developing field of thermal spraying since the coatings prepared from liquids exhibit some unique features, such as high hardness, thermal shock resistance or low thermal and electric conductivity. The key factor influencing the final coating character and properties is the input material which may be in the form of a suspension or a solution. Parameters of the selected suspension (solids concentration, viscosity, surface tension, chemical composition, etc.) or solution (concentration, etc.) determine its interaction with the plasma jet which strongly influences the coating buildup. This proceeding introduces the problematics of the interaction between the liquid feedstock material with the plasma jet and presents the way of evaluation of the coating buildup.

Individual human odor as a forensic trail in criminal proceeding made by contact or contactless transmission and its resistance to physical agents
Santariová, Milena ; Bartoš, Luděk (advisor) ; Chmelíková, Eva (referee)
The dissertation thesis consists of four papers that have been published in scientific journals. Study n. 1 The need to recover evidence from water is quite common in criminal investigation. The article deals with the possibility to collect human scent from such objects and with the ability of specially trained dogs to match such scent samples with scent samples collected from detained suspects. During an experiment, designed as a blind one, it has been proved, that human scent can survive on submerged objects and can be later used for scent identification. Study n. 2 To collect odors the Czech Republic Police use special fabric sorbents manufactured under the registered mark ARATEX. Before use the fabric sorbent is treated by water vapor sterilization. After the scent identification the sorbent is destroyed. The goal of the study was to verify if the vapor sterilization is effective enough to remove human scent that has already penetrated into the sorbent structure or in other words if the sorbent can be exposed to vapor sterilization and then used again. Specially trained dogs were used to match starting odors with target odors in the line-ups. The results showed that dogs are able to correctly match human odors even after they have being exposed to vapor sterilization. Study n. 3 The purpose of the study was to determine the temperature at which the human scent is degraded so that a dog would not be able to identify it. In contrast to expectations, eight dogs used in the experiment almost flawlessly identified human scents from five scent donors exposed to temperatures of 100°C, 200°C, 300°C, 400°C, 500°C, 600°C, 700°C, and 800°C. Only two of the dogs were able to identify 5 of 15 scent samples exposed to 900°C. No dog identified a scent exposed to 1000°C. Our study verified heat survivability of human scent far beyond existing expectations. Study n. 4 We tested the hypothesis that if odor fallout (the release of a human odor onto an untouched object) in human subjects exists, then holding a hand above an absorbent will produce a detectable scent which will be subsequently matched in a detection test by trained dogs. Scents were collected from seven males to sterile cotton absorbent squares. The left hand was used to get the control scent and the right hand served as the target scent. Each experimental subject was sitting and his left hand was laid down on a cotton square for 3 min. The right hand was held 5 cm above another cotton square for 3 min. The scent identification was done by two specially trained police German shepherds. Both dogs performed 14 line-ups and correctly matched the collected scents of all test subjects. The results suggest the existence of human odor fallout, whereby a human scent trace is left by humans even if they do not touch an object.

The use of biomass ash
Ochecová, Pavla ; Tlustoš, Pavel (advisor) ; Radim, Radim (referee)
One of the most frequently used sources of renewable energy is biomass, mainly wood biomass. Incineration is the most common technology utilizing the energy from biomass to produce heat. A byproduct of these technologies is ash, whose composition depends on the feedstock composition and the incineration technologies. Due to the high content of valuable nutrients in ash, one of the suitable option for ash utilization seems to be application into agricultural or forestry land. Therefore, it is necessary to test response of soils and plants and look for the most suitable combination of soil additive (biomass ash), and plants. Experimental part of PhD thesis was divided into the incubation experiment and the vegetation pot experiments. The incubation experiment: The efficiency of ash addition at two application rates was tested for nutrients enrichment in different soils within period of 56 days. The vegetation pot experiments: The two plants Triticum aestivum L: (three-year experiment) and Lolium perenne L. (one-year experiment) were planted in the 5L pots. Soils were treated with ash or ash combinated by superphoshate and flue gas desulfurization gypsum. For both plants, we evaluated the plant growth, biomass production and content of macro, micro and toxic elements in the biomass and in the soils.

Comprehensive research report to experimental work on fatigue crack initiation in the sandstone and research of influences of the consolidation for fracture behavior in cases of cracks
Šperl, Martin ; Drdácký, Miloš ; Jandejsek, Ivan
Fatigue crack initiation in the sandstone specimens (location – Božanov) was made using a resonant testing machine in three point bending mode. It produced the geometrically similar damage. Subsequent fracture tests made it possible to assess the effect of the consolidation solutions on fracture properties of the material investigated.

Study of dielectrical properties of organic material thin films
Pospíšil, Jan ; Boušek, Jaroslav (referee) ; Mikula, Milan (referee) ; Zmeškal, Oldřich (advisor)
The dissertation is focused on the study of electric and especially dielectric properties of thin film organic materials with their huge potential for optoelectronics and other industrial sectors. The theoretical part deals with the use of organic materials in organic photovoltaic cells, the methods of deposition techniques and characterization. The theoretical knowledge of the dielectric spectroscopy, including methods for determining the physical properties and evaluation of experimental data are also described. The experimental part is devoted to the study of small molecule organic solar cells with bulk heterojunction composed of electron donor molecule of DPP(TBFu)2 and electron acceptor fullerene derivatives, such as PC60BM, PC70BM and TC60BM. The experimental part is divided into two main parts. The first part deals with the study of processes occurring at the interface between the active layer and the contact; the second part is focused on transport processes inside the structure of photovoltaic cells and also contains a study of perovskite solar cells.

Noise, Transport and Structural Properties of High Energy Radiation Detectors Based on CdTe
Šik, Ondřej ; Lazar, Josef (referee) ; Navrátil, Vladislav (referee) ; Grmela, Lubomír (advisor)
Poptávka ze strany vesmírného výzkumu, zdravotnictví a bezpečnostního průmyslu způsobila v posledních letech zvýšený zájem o vývoj materiálů pro detekci a zobrazování vysokoenergetického záření. CdTe a jeho slitina CdZnTe. jsou polovodiče umožnují detekci záření o energiích v rozsahu 10 keV až 500 keV. Šířka zakázaného pásma u CdTe / CdZnTe je 1.46 -1.6 eV, což umožňuje produkci krystalů o vysoké rezistivitě (10^10-10^11 cm), která je dostačující pro použití CdTe / CdZnTe při pokojové teplotě. V mé práci byly zkoumány detektory CdTe/CdZnTe v různých stádiích jejich poruchovosti. Byly použity velmi kvalitní spektroskopické detektory, materiál s nižší rezistivitou a výraznou polarizací, detektory s asymetrií elektrických parametrů kontaktů a teplotně degenerované vzorky. Z výsledků analýzy nízkofrekvenčního šumu je patrný obecný závěr, že zvýšená koncentrace defektů způsobí změnu povahy původně monotónního spektra typu 1/f na spektrum s výrazným vlivem generačně-rekombinačních procesů. Další výrazná vlastnost degenerovaných detektorů a detektorů nižší kvality je nárůst spektrální hustoty šumu typu 1/f se vzrůstajícím napájecím napětí se směrnicí výrazně vyšší než 2. Strukturální a chemické analýzy poukázaly, že teplotní generace detektorů způsobuje difuzi kovu použitého při kontaktování a stopových prvků hlouběji do objemu krystalu. Část mé práce je věnována modifikaci povrchu svazkem argonových iontů a jejímu vlivu na chemické složení a morfologii povrchu.

Acceleration of Object Detection Using Classifiers
Juránek, Roman ; Kälviäinen, Heikki (referee) ; Sojka, Eduard (referee) ; Zemčík, Pavel (advisor)
Detekce objektů v počítačovém vidění je složítá úloha. Velmi populární a rozšířená metoda pro detekci je využití statistických klasifikátorů a skenovacích oken. Pro učení kalsifikátorů se často používá algoritmus AdaBoost (nebo jeho modifikace), protože dosahuje vysoké úspěšnosti detekce, nízkého počtu chybných detekcí a je vhodný pro detekci v reálném čase. Implementaci detekce objektů je možné provést různými způsoby a lze využít vlastnosti konkrétní architektury, pro urychlení detekce. Pro akceleraci je možné využít grafické procesory, vícejádrové architektury, SIMD instrukce, nebo programovatelný hardware. Tato práce představuje metodu optimalizace, která vylepšuje výkon detekce objektů s ohledem na cenovou funkci zadanou uživatelem. Metoda rozděluje předem natrénovaný klasifikátor do několika různých implementací, tak aby celková cena klasifikace byla minimalizována. Metoda je verifikována na základním experimentu, kdy je klasifikátor rozdělen do předzpracovací jednotku v FPGA a do jednotky ve standardním PC.

Digital circuits test optimization by multifunctional components
Stareček, Lukáš ; Gramatová, Elena (referee) ; Kubátová, Hana (referee) ; Kotásek, Zdeněk (advisor)
This thesis deals with the possibilities of digital circuit test optimization using multifunctional logic gates. The most important part of this thesis is the explanation of the optimization principle, which is also described by a formal mathematical apparatus. Based on this apparatus, the work presents several options. The optimization of testability analogous to inserting test points and  simple methodology based on SCOAP is shown. The focus of work is a methodology created to optimize circuit tests. It was implemented in the form of software tools. Presented in this work are the results of using these tools to reduce the test vectors volume while maintaining fault coverage on various circuits, including circuits from the ISCAS 85 test set. Part of the work is devoted to the various principles and technology of creating multifunctional logic gates. Some selected gates of these technologies are subject to simulations of electronic properties in SPICE. Based on the principles of presented methodology and results of multifunctional gates simulations, analysis of various problems such as validity of the modified circuit test and the suitability of each multifunctional gate technology for the methodology was also made. The results of analysis and experiments confirm it is possible for the multifunctional logic gate to optimize circuit diagnostic properties in such a way that has achieved the required circuit test parameter modification with minimum impact on the quality and credibility of these tests.

Grammars with Restricted Derivation Trees
Koutný, Jiří ; Janoušek, Jan (referee) ; Vojnar, Tomáš (referee) ; Meduna, Alexandr (advisor)
V této disertační práci jsou studovány teoretické vlastnosti gramatik s omezenými derivačními stromy. Po uvedení současného stavu poznání v této oblasti je výzkum zaměřen na tři základní typy omezení derivačních stromů. Nejprve je představeno zcela nové téma, které je založeno na omezení řezů a je zkoumána vyjadřovací síla takto omezené gramatiky. Poté je zkoumáno několik nových vlastností omezení kladeného na cestu derivačních stromů. Zejména je studován vliv vymazávacích pravidel na vyjadřovací sílu gramatik s omezenou cestou a pro tyto gramatiky jsou zavedeny dvě normální formy. Následně je popsána nová souvislost mezi gramatikami s omezenou cestou a některými pseudouzly. Dále je prezentován protiargument k vyjadřovací síle tohoto modelu, která byla dosud považována za dobře známou vlastnost. Nakonec je zavedeno zobecnění modelu s omezenou cestou na ne jednu, ale několik cest. Tento model je následně studován zejména z hlediska vlastností vkládání, uzávěrových vlastností a vlastností syntaktické analýzy.