|
Conditions of observation of electrode masses in environmental scanning electron microscope
Drnovský, Radek ; Michálek, Martin
When an electrochemical battery operates, oxides and sulphides are produced on the interface between the electrode mass and collector. This causes a short battery life and less efficiency. For the study of these phenomena the observation of the structure of the surface of the electrode mass in the ESEM was chosen. The electrode mass is operated in a liquid of an electrolyte. When the specimen is observed in the classic scanning electron microscope (SEM), its surface is enormously dried by the vacuum and its state does not correspond to the original state in the battery. Observation in ESEM allows the use of working pressures in the range from tens to thousands of Pa, and the drying of the specimen is suppressed. When the working conditions in the specimen chamber are changed, the quality of given images changes too. The aim of the experiment is to determine optimum conditions for the attainment of a good-quality image of the structure of the electrode mass surface in the ESEM.
|
|
Fiscal rules in selected EU countries between 2004-2015: sensible method for consolidation of public finances or fad of politicians?
Veselý, Lukáš ; Strejček, Ivo (advisor) ; Chmelová, Pavla (referee)
The subject of fiscal rules is very topical issue. The rise of public debt in certain developed countries resulted in what is sometimes called "debt crisis". Debt of those countries which is higher than their annual gross domestic product is viewed as unpayable by some economists. The main objective of this thesis has been to prove or disprove hypothesis that the fiscal rules studied in this paper are an effective solution for public finance consolidation. This verification was based on the analysis of fiscal rules functioning in selected countries between 2004 and 2015. As per results of analysis the paper aims to give recommendations for the Czech financial constitution proposal. The actual results of inquiry proved the hypothesis. Well-chosen fiscal rules are the right way towards fiscal consolidation, provided they are observed. Fiscal rules making thus requires an emphasis to be placed on the well-formulated exit clauses altogether with prospective sanctions. The current Czech financial constitution proposal is built on the correctly picked fiscal rule type, although the reference value lacks economic sense and it would not lead, with a high degree of probability, towards fiscal consolidation.
|
|
Clustering and regression analysis of micro panel data
Sobíšek, Lukáš ; Pecáková, Iva (advisor) ; Komárek, Arnošt (referee) ; Brabec, Marek (referee)
The main purpose of panel studies is to analyze changes in values of studied variables over time. In micro panel research, a large number of elements are periodically observed within the relatively short time period of just a few years. Moreover, the number of repeated measurements is small. This dissertation deals with contemporary approaches to the regression and the clustering analysis of micro panel data. One of the approaches to the micro panel analysis is to use multivariate statistical models originally designed for crosssectional data and modify them in order to take into account the within-subject correlation. The thesis summarizes available tools for the regression analysis of micro panel data. The known and currently used linear mixed effects models for a normally distributed dependent variable are recapitulated. Besides that, new approaches for analysis of a response variable with other than normal distribution are presented. These approaches include the generalized marginal linear model, the generalized linear mixed effects model and the Bayesian modelling approach. In addition to describing the aforementioned models, the paper also includes a brief overview of their implementation in the R software. The difficulty with the regression models adjusted for micro panel data is the ambiguity of their parameters estimation. This thesis proposes a way to improve the estimations through the cluster analysis. For this reason, the thesis also contains a description of methods of the cluster analysis of micro panel data. Because supply of the methods is limited, the main goal of this paper is to devise its own two-step approach for clustering micro panel data. In the first step, the panel data are transformed into a static form using a set of proposed characteristics of dynamics. These characteristics represent different features of time course of the observed variables. In the second step, the elements are clustered by conventional spatial clustering techniques (agglomerative clustering and the C-means partitioning). The clustering is based on a dissimilarity matrix of the values of clustering variables calculated in the first step. Another goal of this paper is to find out whether the suggested procedure leads to an improvement in quality of the regression models for this type of data. By means of a simulation study, the procedure drafted herein is compared to the procedure applied in the kml package of the R software, as well as to the clustering characteristics proposed by Urso (2004). The simulation study demonstrated better results of the proposed combination of clustering variables as compared to the other combinations currently used. A corresponding script written in the R-language represents another benefit of this paper. It is available on the attached CD and it can be used for analyses of readers own micro panel data.
|
|
Internal equity principle in the context of company strategy
Kopecký, Martin ; Nový, Ivan (advisor) ; Háša, Stanislav (referee) ; Blažek, Ladislav (referee)
The thesis deals with the scientific problem of the link between the strategic management and the compensation system using the principle of internal equity. The work is based on two pillars, namely the qualitative research and own proposed solution. The first part of the thesis describes the qualitative research and the possibilities and the synergistic effects of linking business strategy and compensation system. The qualitative research is performed as a multi-case study and investigates the phenomenon in the practice of three companies from various markets (the Czech Republic, Slovakia and Bosnia and Hercegovina) and industries (finance, IT/Telco and FMCG). The research tries to find answers to the four research questions: How does business strategy influence compensation process? How can compensation support the realization of a business strategy? How can business strategy be linked with a compensation system within the principle of internal equity? How can compensation reinforce the strategic function of the human resources management? The research is based on the study of theoretical sources as well as on practical fieldwork. The qualitative research itself uses qualitative research methods for data collection, such as observations, questionnaires, and document analysis. The population questioned was top managers, line managers and representatives of HR department. In total, 142 interviews were performed by a single person. The collected data were analyzed and the triangulation was applied. The findings were summarized and generalized into a final report that brings answers to the research questions above. The research brings valuable findings used in the second, design part of the thesis. The own proposed solution consists of two main models. The first one is a simplified scheme of the compensation system and the second one is a model of strategic segmentation of jobs. The first model could be used successfully in the business practice as well as in education. The second model of the strategic job segmentation brings answer to the question of synergistic linking of business strategy and the compensation system within the principle of internal equity. The model brings valuable findings and a foundation for further theoretical research and its further development. The model also brings practical solution to the design of related policies and processes in the strategic management of human resources. By the design of both proposed models the main objectives of the thesis were achieved.
|
|
Specific behaviour of soldiers towards reproductives of termite genus Prorhinotermes (Isoptera: Rhinotermitidae).
Dolejšová, Klára ; Šobotník, Jan (advisor) ; Klimeš, Petr (referee)
Soldier caste is the oldest altruistic caste in termites, highly specialized for defensive tasks. Therefore, a number of adaptations in anatomy and behaviour can be observed in soldier, lacking in other termite castes. The aim of this study was to verify the hypothesis that in disturbed groups the soldiers will prefer to stand by and defend the reproductives, the most valuable individuals. Therefore, I studied in two species of the genus Prorhinotermes (P. simplex and P. canalifrons) the ability of soldiers to discriminate neotenic reproductives and provide them with defence. In agreement with the initial hypothesis, the soldiers of both species prooved to be able of an instantaneous recognition of reproductives and remained close to them. In P. simplex, the neotenic female was the most attractive individual, while in P. canalifrons, neotenics of both sexes were equally attractive. The observed preference of reproductives appears to occur only with a certain age of the reproductives in incipient colonies, along with their sexual maturation. Caste specificity of cuticular lipids supports the presumption that the caste recognition is based on olphactoric cues in the cuticle of reproductives.
|
|
CRM System Optimization
Fučík, Ivan ; Mildeová, Stanislava (advisor)
This thesis is focused on CRM solutions in small and medium-sized organizations with respect to the quality of their customer relationship. The main goal of this work is to design an optimal CRM solution in the environment of real organization. To achieve this goal it is necessary to understand the theoretical basis of several topics, such as organizations and their relationship with customers, CRM systems, their features and trends. On the basis of these theoretical topics it is possible to analyze current CRM solution in the organization. From the data obtained by the methods of observation and controlled interview it was possible to prepare a design for optimal CRM solution. This optimal solution comes also from user and organization requirements. The optimal CRM solution saves time and costs associated with current CRM solution and replaces existing and ineffective CRM tools.
|
|
The Changes of Body Temperature of Patients during a Medical Procedure in Total Anesthesia
BENEŠOVÁ, Monika
The first part of the present dissertation shows mechanisms of keeping of body temperature in an optimum range as well as it divides and evaluates range of body temperature. My dissertation also deals with the ways of measurement of body temperature, methods of measurement and tools which are neccessary for measurement of body temperature. Another part presents characteristics of aneshtesia its division, ways of application and tools which are used for total anesthesia. It is also described an observation of body temperature during total anesthesia, negative consequences of hypothermia, regulations of body temperature during total anesthesia and prevention and treatment of hypothermia. There are descriptions of targets and hypothesis in the second part. There were made five hypothesis. The third part shows methods of collecting data itself. They are results of stucture observation of changes of body temperature of patiens in total anesthesia during surgery.The fourth part are charts and graphs showing results of measurements of body temperature of our patients in total anesthesia as well as results of the questionnaires based on answers from asked nurses. There are particular hypothesis and their results in discussion part. Hypothesis H1 was proved. Hyphothesis H2 is not possible to be disproved. Hyphothesis H3 was not proved. Hyphothesis H4 was proved and hyphotesis H5 was proved. We can deduce from the results that active use of tools for keeping body temperature in a physiological range can prevent decrease of body temperature. It is clear from the questionnaires that nurses are aware of complications connected to hypothermia. They actively use tools for keeping body temperature in physiological range. There is a summary in the conclusion of the dessertation whether all estimated targets were accomplished. As a result of the dissertation we can assume that using of tools for keeping body temperature of total anasthesia patients should be a standard. There should be also a standard to measure body temperature during an operation in total anasthesia itself.
|
|
Forms of advertising on social networks and consumer protection
Žďárský, Jiří ; Vavrečka, Jan (advisor) ; Štěpánek, Petr (referee)
The theme of this thesis are forms of advertising on social networks and consumer protection. The main informational source is above all research of specialized literature, articles, online or other sources in connection with author's own observations and analysis of the respective legislation and ultimately the comparison with author's gained professional experience. The result of this work is a comprehensive overview and introduction to the law of social networks and advertising, demonstration of the importance and significance of this topic and finally evaluation of the effectiveness of legislation that protects consumers in the environment of social networks.
|
|
The role of tubulin transport between the nucleus and the cytoplasm
Bokvaj, Pavel ; Schwarzerová, Kateřina (advisor) ; Zažímalová, Eva (referee)
Tubulin is the basic building block of microtubules which ensure intracellular transport, morphological changes, the connection of proteins of metabolic pathways, the segregation of chromosomes during mitosis and many other essential processes in plant cells. The localization of tubulin regarding nucleus is strictly controlled and during the interphase, tubulin is usually not present in the nucleus. As we previously showed, one of the exceptions of the presence of tubulin in the nucleus is the cold stress condition. Also, we discovered several plant-specific nuclear export sequences (NES) in tubulin molecules: one in α-tubulin and two in β-tubulin. In this work I found that double mutation of both functional β-tubulin NESes cause slight accumulation of the protein in the nuclei. However, the phenotype of the transgenic plants expressing β-tubulin with mutations is probably not affected by the presence of the mutated protein. The effect of the expression of the mutated β-tubulins was observed in Nicotiana tabacum BY-2 cells as well. The expression of β-tubulin carrying a single NES3 mutation or double mutation of both NESes bring changes of the division activity of the cells, while the NES2 mutation does not have any effect. Furthermore, it was discovered that the 0řC cold tr eatment does not cause...
|
|
ELECTRON BEAM REMELTING OF PLASMA SPRAYED ALUMINA COATINGS
Matějíček, Jiří ; Veverka, J. ; Čížek, J. ; Kouřil, J.
Plasma sprayed alumina coatings find numerous applications in various fields, where they enhance the properties of the base material. Examples include thermal barriers, wear resistance, electrical insulation, and diffusion and corrosion barriers. A typical structure of plasma sprayed coatings, containing a multitude of voids and imperfectly bonded interfaces, gives them unique properties - particularly low thermal conductivity, high strain tolerance, etc. However, for certain applications such as permeation barriers or wear resistance, these voids may be detrimental.\nThis paper reports on the first experiments with remelting of plasma sprayed alumina coatings by electron beam technology, with the purpose of densifying the coatings and thereby eliminating the voids. Throughout the study, several parameters of the e-beam device were varied - beam current, traverse velocity and number of passes. The treated coatings were observed by light and electron microscopy and the thickness, structure and surface morphology of the remelted layer were determined and correlated with the process parameters. Based on the first series of experiments, the e-beam settings leading to dense and smooth remelted layer of sufficient thickness were obtained. In this layer, a change of phase composition and a marked increase in hardness were observed.\n
|
guest ::
