| |
|
Application of the Balanced Scorecard in the company ELLA-CS
Cwierz, Jan ; Neumaierová, Inka (advisor) ; Beneš, Oldřich (referee)
Balanced Scorecard belongs to the most prominent managerial tools for performance measurement and strategy management. Aim of this thesis is to describe BSC with emphasis to small and medium enterprises using literature review. Additional supporting tools for strategy formulation are included as well. BSC is then proposed for implementation in privately owned small enterprise in the sector of medical devices. Based on the thorough analysis of the company and its environmental factors operational and strategical performance gaps are identified. Such gaps are then addressed by means of BSC including financial, customer, internal processes and learning and growth perspective. Despite some limitations inherent to SMEs in general introduction of BSC is feasible and could be of value to all company stakeholders.
|
|
Makroekonomický dopad mateřské (a rodičovské) dovolené ve srovnání České Republiky s Brazílií
Kalkusová, Marie ; De Castro, Tereza (advisor) ; Neumann, Pavel (referee)
This thesis aims to estimate the macroeconomic impact of maternity and parental/paternal leave in the Czech Republic and Brazil. In addition, the thesis stresses out the costs of Czech model application to Brazil and vice-versa. The first chapter brings a theoretical framework. It compares the analyzed policies in both countries and introduces the relevant terms. The second chapter estimates the costs of maternity and parental/paternal leave related to public expenditure and GDP for the years 2005-2014 and brings own simulation model for Czech model application to Brazil and vice-versa. The third chapter analyses the inefficiencies and suggest possible mitigation. The results show the costs of 0.71% of GDP and 1.66% of public expenditure in the Czech Republic and 0.50% GDP and 2.27% of public expenditure in Brazil in 2014. The Czech model applied in Brazil would be very costly and the opposite scenario would lead to the decrease of macroeconomic burden in the Czech Republic. The thesis also analyzes the influence of maternal and parental leave in other areas, such as labor market, where the current structure may penalize Czech women in long term. By this analysis, the thesis contributes to the current debate about the impact, the length and costs of maternity and parental leave.
|
|
Clustering and regression analysis of micro panel data
Sobíšek, Lukáš ; Pecáková, Iva (advisor) ; Komárek, Arnošt (referee) ; Brabec, Marek (referee)
The main purpose of panel studies is to analyze changes in values of studied variables over time. In micro panel research, a large number of elements are periodically observed within the relatively short time period of just a few years. Moreover, the number of repeated measurements is small. This dissertation deals with contemporary approaches to the regression and the clustering analysis of micro panel data. One of the approaches to the micro panel analysis is to use multivariate statistical models originally designed for crosssectional data and modify them in order to take into account the within-subject correlation. The thesis summarizes available tools for the regression analysis of micro panel data. The known and currently used linear mixed effects models for a normally distributed dependent variable are recapitulated. Besides that, new approaches for analysis of a response variable with other than normal distribution are presented. These approaches include the generalized marginal linear model, the generalized linear mixed effects model and the Bayesian modelling approach. In addition to describing the aforementioned models, the paper also includes a brief overview of their implementation in the R software. The difficulty with the regression models adjusted for micro panel data is the ambiguity of their parameters estimation. This thesis proposes a way to improve the estimations through the cluster analysis. For this reason, the thesis also contains a description of methods of the cluster analysis of micro panel data. Because supply of the methods is limited, the main goal of this paper is to devise its own two-step approach for clustering micro panel data. In the first step, the panel data are transformed into a static form using a set of proposed characteristics of dynamics. These characteristics represent different features of time course of the observed variables. In the second step, the elements are clustered by conventional spatial clustering techniques (agglomerative clustering and the C-means partitioning). The clustering is based on a dissimilarity matrix of the values of clustering variables calculated in the first step. Another goal of this paper is to find out whether the suggested procedure leads to an improvement in quality of the regression models for this type of data. By means of a simulation study, the procedure drafted herein is compared to the procedure applied in the kml package of the R software, as well as to the clustering characteristics proposed by Urso (2004). The simulation study demonstrated better results of the proposed combination of clustering variables as compared to the other combinations currently used. A corresponding script written in the R-language represents another benefit of this paper. It is available on the attached CD and it can be used for analyses of readers own micro panel data.
|
|
The perspectives of tourism in the Canary Islands (with special focus on Gran Canaria)
Pazderová, Monika ; Abrhám, Josef (advisor) ; Havlíčková, Blanka (referee)
The Bachelor´s thesis is aimed at discussing tourism and analyzing diffferent perspectives of developement in the Canary Islands, namely in the island of Gran Canaria. The goal of this thesis will first be to evaluace the current situation of tourism in Gran Canaria. It is necessary to find the various perpectives of developement for this area, while also assessing strategic proposal plans in order to increase the competitive ability. The theorical section of this thesis is focused on tourism determination, and destination of tourism. In addition, the origin and developement of tourism in the Canary Islands is discussed. The practical part of this thesis is focused on tourism in Gran Canaria; the life cycle is applied to the destination of Gran Canaria, and there is a complete description of the attractions and infrastructure of the destination. Additionally, a SWOT analysis will take place analyzing the strengths, weakeness, opportunities and threats of tourism in Gran Canaria. In the final chapter, suggestions and solutions for tourism in Gran Canaria will be made based on strategic plans from the Canary institutions of tourism.
|
|
Spain as a tourist destination
Zbořilová, Kristýna ; Abrhám, Josef (advisor) ; Havlíčková, Blanka (referee)
This Bachelor's Thesis deals with tourism in Spain. The topic is quite broad so the main aim of the thesis is to evaluate tourism in two significantly different regions - Andalusia and Basque Country. The first chapter defines terms related to tourism that are essential to coherently understand this thesis. For example, this part defines the term tourism and its typology. The second chapter focuses on tourism in all of Spain. In particular, Spain is described in terms of history and how tourism is evaluated. In addition, Spain's most attractive places are presented. The second to last, and final chapter are similar in structure in order to perform a comparison of the chapters. The first part of both chapters describes the regions. Then, tourism is evaluated by using statistics from incoming tourists. Finally, SWOT analysis is used to comprehensively evaluate the previously mentioned information.
|
|
Zjednodušení kvantových obvodů pro modulární umocňování
Fišer, Petr ; Ivánek, Jiří (advisor) ; Nentvich, Libor (referee)
This thesis is based on top of the previous thesis "Security of modern encryption protocols" where we introduced a new paradigm for constructing quantum circuits. We have built circuits for modular arithmetic (addition, multiplication and exponentiation) in order to break El-Gamal asymmetric cryptosystem. Current thesis reviews all proposed circuits and discusses possibilities of their further optimization in goal of lowering the number of used qbits at least by an order of magnitude. It also shows that this is not possible due to existence of COPY gates which make the design inherently unoptimizable. Getting rid of COPY gates is, however, not possible without substantial rewrite of the whole paradigm. The overall estimate of number of qbits used in circuits thus remains O(log(m)log^2(N)) where m is a processed number and N is a modulus. The thesis also proposes optimization of the modular multiplication circuit that, if issues with COPY gates are resolved, allows us to lower the number of used qbits by about O(log(m)) at the price of a longer execution time.
|
|
HYDROGENATION PROPERTIES OF BALL-MILLED Mg-Ti-C-Zr COMPOSITE
Král, Lubomír ; Čermák, Jiří ; Roupcová, Pavla
The hydrogen storage properties of ball-milled Mg-Ti-Zr-C composite (1.8 wt.% Ti, 1.9 wt.% Zr and 0.2 wt.% C) were investigated. It has been previously shown, that the addition of Ti, Zr and C improved its storage properties. This beneficial effect of additives upon hydrogen storage properties can be explained by catalysis by the particles rich in Ti or Zr located on the surface of Mg grains. They provide effective pathways for the hydrogen diffusion into the MgH2. The morphological and microstructural characteristics were investigated by scanning electron microscopy and by X-ray diffraction. The hydrogen sorption was measured by Sieverts method using Setaram PCT-Pro device. In this paper, sorption behaviour of the composite after ball-milling and after aging on the air was compared. The ball-milled composite adsorbed 3.5 wt.% H2 within 10 min at 623 K. However, hydrogen storage capacity of the composite aged on the air for 7 months remarkably decreased: The aged composite adsorbed within 10 min only 2 wt.% H2 at 623 K and the sorption capacity decreased from 4.7 wt.% H2 to 2.1 wt.% H2.
|
|
HYDROGEN ABSORPTION IN A-Co30Fe55B15
Čermák, Jiří ; Král, Lubomír ; Roupcová, Pavla
Hydrogen solved in amorphous alloys (AAs) influences their magnetic characteristics. AAs are also perspective\nas additives that can improve hydrogen storage kinetic in certain types of ball-milled hydrogen storage\nmaterials (HSMs). Therefore, knowledge of hydrogen solubility and hydrogen sorption kinetics in AAs are of a\ngreat importance for aimed design both AAs with optimal magnetic parameters and HSMs with desired sorption\ncharacteristics. In the present paper, amorphous alloy Co30Fe55B15 (an example of the type a-TM1xTM2y Bz ;\nTM - transition metal) was investigated. Hydrogen concentration c H was measured by Sieverts method in\ntemperature interval from T = 150 °C to T = 350 °C under hydrogen pressure p up to 6 MPa. It was found that\nc H was an increasing function of p and its maximum value was typically 0.5 wt.% H2 at 350 °C and 6 MPa.\nHowever, when the alloy was preliminary hydrogen charged (PHC), the pressure dependence of total c Htot in\nthe first absorption cycle(s) is non-monotonous in dependence on PHC conditions. For the sake of comparison,\nthe same absorption characteristics were measured also in Mg2Ni intermetallic that is a common constituent\nin Mg-based HSMs. Comparing Co30Fe55B15 and Mg2Ni, it was concluded that Co30Fe55B15 shows lower\nhydrogen solubility, but much better absorption kinetics.
|
|
PM2.5 Chemical Composition at the Rural Background Site Košetice.
Schwarz, Jaroslav ; Cusack, Michael ; Karban, Jindřich ; Chalupníčková, E. ; Havránek, Vladimír ; Smolík, Jiří ; Ždímal, Vladimír
Measurements of atmospheric aerosols at rural background areas are important because they are not influenced by the urban emissions, and are therefore better suited to investigate the influence of long-range transport and trends in concentrations of individual pollutants. Summary of the measurements of total concentration and the concentration of PM10 and PM2.5 components was carried out in the works Putaud et al. (2004, 2010). Although the later work included the measurement of more than 60 stations across Europe, the post-communist countries contained data on PM2.5 from only four locations (Prague, Debrecen, Hungary, and two rural locations). Although Košetice place where this study was made, is also discussed there, it was for only PM10 and total carbon (TC). Therefore, the aim of this study is to fill this information gap, and provide additional information regarding the PM2.5 fraction and composition at the Central European background station Košetice.
Fulltext: content.csg -  PDF
Plný tet: SKMBT_C22016110313110 - PDF
|
guest ::
