|
Analysis of the crack initiated from the orthotropic bi-material sharp notch
Profant, T. ; Klusák, Jan ; Kotoul, M.
Under the consideration of the bi-material notch composed of two orthotropic materials the potential direction of the crack initiated from the notch tip is determined from the maximum mean value of the tangential stresses and local minimum of the mean value of the generalized strain energy density factor in both materials. Following the assumption of the same mechanism of the rupture in the case of the crack and the notch, an expression for the critical values of the generalized stress intensity factor can be obtained. The radial and tangential stresses and strain energy density are expressed using the Lekhnitskii-Eshelby-Stroh (LES) formalism for the plane elasticity. The stress singular exponents and corresponding eigenvectors are the solution of the eigenvalue problem leading from the prescribed notch boundary and compatibility conditions. In generally, there is more than one solution of this eigenvalue problem and consequently the generalized stress intensity factors.
|
|
Proceedings of the 16th International colloquium Mechanical Fatigue of Materials
Polák, Jaroslav ; Kruml, Tomáš ; Man, Jiří
The XVI International Colloquium on Mechanical Fatigue of Metals was organized by the Institute of Physics of Materials, Academy of Sciences of the Czech Republic in Brno, in September 24-26, 2012. The Colloquium has been opened to participants from all countries interested in the subject of fatigue of metallic materials. The proceedings contains 39 abstracts of 35 oral and of 4 poster contributions by 122 authors from 18 countries to be presented during the Colloquium.
|
|
Small mammals in diet of barn owl in the Eastern Meditarranean
Šindelář, Jiří ; Horáček, Ivan (advisor) ; Anděra, Miloš (referee)
The extensive material of skeletal remains of mammals from a diet of barn owl in the eastern Mediterranean has been processed and evaluated with different techniques of chorological and morphometric analysis. At least 8400 individuals of 45 species of insectivores, rodents and bats were found in our total collection of samples, which represents a significant portion of fauna of the region. We have evaluated a chorological composition of the taphocoenoses and the interregional differences, manifested primarily by differences in the representation of satellite and accessory elements. We found a highly significant impoverishment of the isolated island taphocenoses (Cyprus, Karpathos, partly on Crete), where Cricetidae, Arvicolidae, C. leucodon etc. are missing. On the other hand the essential part of the dominance structure takes up the Rattus rattus, which acts here as an invasive species, significantly more successful than in the ragged continental contexts. The species diversity of the examined samples is positively correlated with the geographic latitude (taphocenoses of the northern regions are significantly richer) and negatively with the island effect and the degree of aridization. The morphometric analysis of the three most abundant species of Soricidae within the studied region showed...
|
|
Optimalization of material flow in automotive industry
Kolář, Tomáš ; Jirsák, Petr (advisor) ; Vinš, Marek (referee)
This master thesis is focussed on optimalization of material flow in an automotive company. First part introduce theoretical background. Automotive industry and its actual trends on global markets. Follows short introduction of the company where project of this thesis was executed. Main theoretical part describes concept of lean management, its tools in practical examples, but it is also focussed on philosophical approach to the work and mindset of the company. Follows the aplication part based on theoretical background. The whole project of this master thesis is focussed on specific area called PC store. At first this area is showed in context of overall material flow. Shortly there are introduced processes and areas where full material packaging flows. Follows deeper analysis and optimalization of PC store itself. There are three approaches of stock and lead time reduction applied. Last part shows the comparison of initial and future state including performed changes.
|
|
HYDROGENATION PROPERTIES OF BALL-MILLED Mg-Ti-C-Zr COMPOSITE
Král, Lubomír ; Čermák, Jiří ; Roupcová, Pavla
The hydrogen storage properties of ball-milled Mg-Ti-Zr-C composite (1.8 wt.% Ti, 1.9 wt.% Zr and 0.2 wt.% C) were investigated. It has been previously shown, that the addition of Ti, Zr and C improved its storage properties. This beneficial effect of additives upon hydrogen storage properties can be explained by catalysis by the particles rich in Ti or Zr located on the surface of Mg grains. They provide effective pathways for the hydrogen diffusion into the MgH2. The morphological and microstructural characteristics were investigated by scanning electron microscopy and by X-ray diffraction. The hydrogen sorption was measured by Sieverts method using Setaram PCT-Pro device. In this paper, sorption behaviour of the composite after ball-milling and after aging on the air was compared. The ball-milled composite adsorbed 3.5 wt.% H2 within 10 min at 623 K. However, hydrogen storage capacity of the composite aged on the air for 7 months remarkably decreased: The aged composite adsorbed within 10 min only 2 wt.% H2 at 623 K and the sorption capacity decreased from 4.7 wt.% H2 to 2.1 wt.% H2.
|
|
INFLUENCE OF LASER CUTTING AND PUNCHING ON MAGNETIC PROPERTIES\nOF ELECTRICAL STEEL M470-50A
Bulín, Tomáš ; Švábenská, Eva ; Hapla, Miroslav ; Ondrůšek, Č. ; Schneeweiss, Oldřich
Electrical steel M470-50A belongs to the most often used materials in electrical machines. Due to this fact, it is desirable to know the magnetic parameters after processing raw sheets into the required shape. Basic parameters of mechanical, electrical, and magnetic properties of the sheets are usually obtained from the producer but the magnetic properties are changing in dependence on additional machining processes. The aim of this study is to describe changes in parameters of magnetic behavior after punching, laser and spark cutting of the original sheets. The basic information of structure was obtained by optical and scanning electron microscopy. The magnetic parameters were acquired from the measuring of magnetic hysteresis loops in dependence on saturation fields and frequencies. The results are discussed from the point of view of applied\ncutting technology with the aim to obtain the best magnetic parameters and consequently a higher efficiency of the final product. Results can be used as input parameters in simulation of the electrical machine.
|
|
STRAIN ENGINEERING OF THE ELECTRONIC STRUCTURE OF 2D MATERIALS
del Corro, Elena ; Peňa-Alvarez, M. ; Morales-García, A. ; Bouša, Milan ; Řáhová, Jaroslava ; Kavan, Ladislav ; Kalbáč, Martin ; Frank, Otakar
The research on graphene has attracted much attention since its first successful preparation in 2004. It possesses many unique properties, such as an extreme stiffness and strength, high electron mobility, ballistic transport even at room temperature, superior thermal conductivity and many others. The affection for graphene was followed swiftly by a keen interest in other two dimensional materials like transition metal dichalcogenides. As has been predicted and in part proven experimentally, the electronic properties of these materials can be modified by various means. The most common ones include covalent or non-covalent chemistry, electrochemical, gate or atomic doping, or quantum confinement. None of these methods has proven universal enough in terms of the devices' characteristics or scalability. However, another approach is known mechanical strain/stress, but experiments in that direction are scarce, in spite of their high promises.\nThe primary challenge consists in the understanding of the mechanical properties of 2D materials and in the ability to quantify the lattice deformation. Several techniques can be then used to apply strain to the specimens and thus to induce changes in their electronic structure. We will review their basic concepts and some of the examples so far documented experimentally and/or theoretically.
|
|
Deposition of Titania from Solution by Hybrid Water-Stabilized Plasma Torch
Mušálek, Radek ; Medřický, Jan ; Tesař, Tomáš ; Kotlan, Jiří ; Lukáč, František
Thermal spraying with liquid feedstock presents a novel route for deposition of functional coatings. In this study, possibility of preparation of titania coatings from solution by hybrid water stabilized plasma torch is presented. Coatings were prepared from solution of titanium isopropoxide Ti[OCH(CH3)2]4 in anhydrous ethanol. Fragmentation of feedstock stream in the plasma jet was monitored by shadowgraphy. Deposition was carried out on steel samples mounted to the cooled rotating carousel. Cross-sectional images from SEM microscope showed successful formation of the deposit with dual morphology consisting of fine feather-like features combined with bigger droplets. X-ray diffraction revealed formation of nanometric rutile crystallites.
|
|
Miřenka Čechová
Janečková, Kateřina ; PETIŠKOVÁ, Ladislava (advisor) ; SOPROVÁ, Jana (referee)
Monographic work focuses on artistic creation Miřenka Čechová, one of the
the leading personalities of our contemporary stagecraft. Her personal and
artistic development started when she began studying dance and continued to
mimic and physical theater. Material presents her contribution to
contemporary Czech scene physical theater and refers to her international
success. Work observes her role like co-founder of physical theaters Theatro
Pantomissimo and Spitfire Company and to presents the work of these
physical theaters and reveals the working and teaching methods in the
preparation of copyright performances.
|
|
The Liberation of Pilsen 1945 in Photography
Křenová, Tereza ; SILVERIO, Robert (advisor) ; JANOŠČÍK, Václav (referee)
This bachelor thesis deals with liberation of Pilsen in May 1945 by american army in photography. The aim of this thesis is finding and collecting archival materials and placing them in a historical-political context. Communist regime changed the portrayal of historical events and directly influenced the amount of exisiting photographs, documents and lives of those who created them. Important part of this bachelor thesis is working with those archival materials – particularly with photographs capturing arrival of Americans and their stay in Czechoslovakia at the end of WW2. Both professional and amateur photographers created valuable photographs as they witnessed the liberation of Pilsen. These photographs became in spite of communist propaganda a clear evidence that Pilsen was liberated by american army.
|
guest ::
