| |
|
Time management
Hanus, Filip ; Franková, Emilie (advisor) ; Motlová, Veronika (referee)
It is of great necessity to know how to manage time. The theoretical part of this thesis is concerned with the definition of time management, its origin and evolution. It covers the basic rules of efficient time management and the principles of efficient work organization. It describes the usage of goals and their setting, circadian rhythms and their influence on our productivity and the most common factors that steal our time. Based on the analysis of time frames and half-structured interviews, the empirical part follows the lives of six university students for two weeks. Our goal is to find out how the respondents use their time, what is their knowledge of time management and also to cover the difference between students living in a room alone and students sharing a room with one or multiple roommates.
|
|
Clustering and regression analysis of micro panel data
Sobíšek, Lukáš ; Pecáková, Iva (advisor) ; Komárek, Arnošt (referee) ; Brabec, Marek (referee)
The main purpose of panel studies is to analyze changes in values of studied variables over time. In micro panel research, a large number of elements are periodically observed within the relatively short time period of just a few years. Moreover, the number of repeated measurements is small. This dissertation deals with contemporary approaches to the regression and the clustering analysis of micro panel data. One of the approaches to the micro panel analysis is to use multivariate statistical models originally designed for crosssectional data and modify them in order to take into account the within-subject correlation. The thesis summarizes available tools for the regression analysis of micro panel data. The known and currently used linear mixed effects models for a normally distributed dependent variable are recapitulated. Besides that, new approaches for analysis of a response variable with other than normal distribution are presented. These approaches include the generalized marginal linear model, the generalized linear mixed effects model and the Bayesian modelling approach. In addition to describing the aforementioned models, the paper also includes a brief overview of their implementation in the R software. The difficulty with the regression models adjusted for micro panel data is the ambiguity of their parameters estimation. This thesis proposes a way to improve the estimations through the cluster analysis. For this reason, the thesis also contains a description of methods of the cluster analysis of micro panel data. Because supply of the methods is limited, the main goal of this paper is to devise its own two-step approach for clustering micro panel data. In the first step, the panel data are transformed into a static form using a set of proposed characteristics of dynamics. These characteristics represent different features of time course of the observed variables. In the second step, the elements are clustered by conventional spatial clustering techniques (agglomerative clustering and the C-means partitioning). The clustering is based on a dissimilarity matrix of the values of clustering variables calculated in the first step. Another goal of this paper is to find out whether the suggested procedure leads to an improvement in quality of the regression models for this type of data. By means of a simulation study, the procedure drafted herein is compared to the procedure applied in the kml package of the R software, as well as to the clustering characteristics proposed by Urso (2004). The simulation study demonstrated better results of the proposed combination of clustering variables as compared to the other combinations currently used. A corresponding script written in the R-language represents another benefit of this paper. It is available on the attached CD and it can be used for analyses of readers own micro panel data.
|
|
Assessment of devices used by the Armed Forces of the Czech Republic in case of radiation emergency.
LOŠKOVÁ, Romana
This Thesis deals with the option of employing the Armed Forces of the Czech Republic (ACR) when a radiation emergency is imminent. Primarily, it focuses on evaluation of selected devices designed for radiation reconnaissance; summarising of radiation protection related legislation; and study of approved procedures. At its beginning, this Thesis tracks the origin of early detection systems at the territory of the then Czechoslovak Socialist Republic and their gradual evolution into the the existing form. From the radiation emergency point of view, this nationwide system represents a priceless help for monitoring of radioactive contamination dispersion and for warning. The following part sums up basic information on what is an ionizing radiation, how it comes into being and which basic quantities describe it. This part also contains basic type distinction, description of consequences for human organism and the most significant interactions of sources of ionizing radiation that could be misused with the most probability. This specific topic is introduced here because of the subsequent part of this Thesis being named Radiological Dispersion Device, or the dirty bomb. The significant part of this Thesis is the summary and classification of related legislation. The first documents referred to are two international standards. Publication 103 the 2007 Recommendations of the International Commission on Radiological Protection is dealing, inter alia, with dosing limits determining dose levels in planned exposure situations and reference levels used for emergency exposure situations and existing exposure situations. Publication 96 Protecting People against Radiation Exposure in the Event of a Radiological Attack is more substantial for this Thesis since it partly copes with the protection of front-line units including Integrated Rescue System (IRS) components and it specifies maximum exposure time for intervening personnel. Based on the IRS Catalogue of Typical Activities (STC 01/IZS), Materialised and Verified Use of a Radiological Weapon, the ACR would be one of the intervening components in such an attack. This Thesis analyses in detail individual ACR procedures starting with activities before employment, through threat prevention, event reaction to post-event activities like decontamination followed by monitoring of personnel contamination and their health condition. The practical part deals mainly with one of the Thesis´s goals which was evaluation of selected dosimetric devices used by the military for radiation reconnaissance. For this purpose, the quantitative research processing their main parameters was applied. The analysis within a selected sample was used for comparing and the sumary index IVi then showed the status of device applicability for contemporary use in radiation emergency. The pre-defined goals of this Thesis have been met implementing the above methods. The comparison of individual devices and their evaluation in respect to their applicability in joint radiation emergency operation with other IRS components has been carried out via discussion. It has been found out that some of the devices are obsolete and do not comply with the requirements for this job. This fact reflects the reality that these devices were designed in the period of a potential nuclear war. This corresponds with their robust structure and high level of sensitivity which is not desirable for a radiation emergency. The most severe problem, however, seems to be the fact that some devices measure quantities in old, no more used, units which could cause misinterpretation. On the other hand, other devices are modern, sensitive at low levels of dose input and offer real-time information on a well organised LCD display. To answer the question of ACR´s readiness to intervene in a radiation emergency one has to say that the ACR is ready to meet its rescue and consequence management tasks at a satisfactory level.
|
|
The perspectives of tourism in the Canary Islands (with special focus on Gran Canaria)
Pazderová, Monika ; Abrhám, Josef (advisor) ; Havlíčková, Blanka (referee)
The Bachelor´s thesis is aimed at discussing tourism and analyzing diffferent perspectives of developement in the Canary Islands, namely in the island of Gran Canaria. The goal of this thesis will first be to evaluace the current situation of tourism in Gran Canaria. It is necessary to find the various perpectives of developement for this area, while also assessing strategic proposal plans in order to increase the competitive ability. The theorical section of this thesis is focused on tourism determination, and destination of tourism. In addition, the origin and developement of tourism in the Canary Islands is discussed. The practical part of this thesis is focused on tourism in Gran Canaria; the life cycle is applied to the destination of Gran Canaria, and there is a complete description of the attractions and infrastructure of the destination. Additionally, a SWOT analysis will take place analyzing the strengths, weakeness, opportunities and threats of tourism in Gran Canaria. In the final chapter, suggestions and solutions for tourism in Gran Canaria will be made based on strategic plans from the Canary institutions of tourism.
|
|
Process Analysis As the Basis for the Implementation of a New Information System
Kmochova, Zdena ; Říhová, Zora (advisor) ; Svatá, Vlasta (referee)
The main objective of this thesis is to analyze the processes in the company POP service, Ltd., also to analyze the current problem in this company and to recommend and propose measures which eliminate the causes of the emergence of the problem. The causes originate from the aspects of the management of people and processes are identified through the analysis of processes associated with the problem and eliminated on the basis of proposals metrics and responsibilities for these processes. The theoretical part of the thesis is devoted to concepts in the field of process management. The theoretical part characterizes these concepts process management, business processes, process analysis and process modeling methods, process maps, graphical notation for writing business processes, business process improvement and analysis organization. In the second part of the thesis is presented the examined organizations POP service, Ltd.. Based on the analysis of the current state are defined vision, mission and goals of the organization. Then there is described a procedure of the analysis of the current state, which is process analysis and proposal of selected processes, metrics and responsibilities for these processes. Methods of analysis are SWOT analysis, analysis of the activities, structured interviews and process analysis. The result of this thesis is to analyze the selection of processes of the company POP service, Ltd., proposal metrics, define jobs and responsibilities and suggestions for improving the selected process.
|
|
Communication Strategy of Komerční banka, a.s. with a Focus on the Youngsters
Bartůňková, Eva ; Postler, Milan (advisor) ; Jelínková, Jitka (referee)
Thesis explores communication strategy of Komerční banka, a.s. with a focus on the Youngsters. The aim of this thesis is an analysis of previous and current campaigns, corroborated by original research. The thesis comprises six chapters, the first two chapters dealing with theory, the rest dealing with empirical findings. The first chapter discusses the difference between marketing and commercial communication and kinds of commercial communication; the second chapter delves into the issue of communication strategy, its types and development. The third chapter consists of a presentation of Komerční banka, a.s. including an evaluation of the competition; the subsequent chapter discusses the characteristics of the G2 brand, its target group and includes an SWOT analysis. The content of the fifth chapter is a description of previous communication and of new communication campaign of the G2 brand. In the conclusion of the thesis, research results are assessed and future steps are recommended.
|
|
The Conclusion of a Contract under the United Nations Convention on Contracts for the International Sale of Goods in Comparison with Czech National Legislation
Krčálová, Kristýna ; Boháček, Martin (advisor) ; Levý, Jan (referee)
This Master's thesis focuses on the United Nations Convention on Contracts for the International Sale of Goods (CISG), better known as the Vienna Convention. The main purpose of this thesis is to evaluate conditions for application of this international treaty and to assess the contracting process under the CISG including the similarities and differences with the Czech national legislation. Finally, it seeks an answer to the question, which of these rules (international or national) are more advantageous for a Czech contractual party with respect to concluding a contract. The thesis is divided into five parts. The first one represents an introduction to the CISG, its origin and the Czech Republic's attitude to it. The second part identifies the conditions for application of the CISG and therefore defines a subject and an object of an international contract of sale under the CISG. Both third and fourth parts gradually introduce two phases of the contracting process (offer and acceptance) including the relevant case-law. The last chapter strives to complete the contracting process with an analysis of the exact moment, when a contract is concluded, as well as with an analysis of a potential battle of the forms and its impact on a contract conclusion.
|
|
INFLUENCE OF LASER CUTTING AND PUNCHING ON MAGNETIC PROPERTIES\nOF ELECTRICAL STEEL M470-50A
Bulín, Tomáš ; Švábenská, Eva ; Hapla, Miroslav ; Ondrůšek, Č. ; Schneeweiss, Oldřich
Electrical steel M470-50A belongs to the most often used materials in electrical machines. Due to this fact, it is desirable to know the magnetic parameters after processing raw sheets into the required shape. Basic parameters of mechanical, electrical, and magnetic properties of the sheets are usually obtained from the producer but the magnetic properties are changing in dependence on additional machining processes. The aim of this study is to describe changes in parameters of magnetic behavior after punching, laser and spark cutting of the original sheets. The basic information of structure was obtained by optical and scanning electron microscopy. The magnetic parameters were acquired from the measuring of magnetic hysteresis loops in dependence on saturation fields and frequencies. The results are discussed from the point of view of applied\ncutting technology with the aim to obtain the best magnetic parameters and consequently a higher efficiency of the final product. Results can be used as input parameters in simulation of the electrical machine.
|
|
Position of Czech Documentary Photography During the Normalization Era
Folk, Čeněk ; VANČÁT, Pavel (advisor) ; Ledvina, Josef (referee)
The subject of my thesis is the position of Czech documentary photography during the normalization era in Czech territory. The term "position" encompasses several aspects of review: political and creative conditions under which the Czech documentary photography was originating; its status within the photography as artistic discipline and within other artistic disciplines; thinking about documentary photography and its changes over time; social application of documentary photography and its impact on society and, last but not least, its impact on political events. In the 70s and 80s the Czech documentary photography reached the greatest expansion, despite the uneasy political background. My thesis examines (among other things) how, why and under what circumstances this boom occurred.
|
guest ::
