| |
|
Design of the pilot Business Intelligence solution for e-commerce platform
Kabrhelová, Kateřina ; Novotný, Ota (advisor) ; Vysoký, Ondřej (referee)
This thesis deals with the design of the pilot Business Intelligence solution for e-commerce platform Shopio. The first part describes the theoretical concepts of Business Intelligence and e-commerce focused on possible approaches to performance measurement of electronic commerce. Furthermore there is a comparison of analytical tools for measuring performance of e-shops which are available on the Czech market. The second part of the thesis first describes the e-commerce platform and the current status of the reporting module. Then the requirement analysis is conducted for the purpose of identifying the current company client's needs and requirements. The new Business Intelligence solution is designed based on the identified requirements described in the previous chapters. This solution is then tested and verified with the use of real e-shop data. The main purpose of this thesis is to refine the current status of the reports and provide a better tool to measure the e-shop performance for the e-shop owners.
|
|
Using of the Care benefit by Users of Social services
ŠINÁKLOVÁ, Marie
The bachelor thesis deals with the widespread social benefit, the attendance allowance and problems associated with it, which implies the main objective of this work, to find out how or what for this allowance is used. This thesis consists of a theoretical and a practical part. In the theoretical part I focused mainly on the purpose, the principles and basic functions of the allowance. I have also described who is and who is not entitled to the allowance, and when such entitlement may extinguish. In this part, I also focused on what the allowance is intended for and what it has to be properly utilized for. Furthermore, I mentioned in my thesis the inspection in accordance with the Social Services Act and the means of protection applied by the state in order to prevent the abuse of the allowance. In the theoretical part, I also mentioned the history of this allowance when it still was an allowance for attending a close person. Due to the fact that the attendance allowance is intended for people who are disadvantaged in some way, I also put a chapter on disability into the theoretical part, where I gave a definition of disability, its types and forms or for example specific needs that result from such disability. In the second, practical part, the qualitative research method was applied. Data collection was conducted by questioning using the technique of a semi-controlled interview. Interviews were conducted with six communication partners that I have selected using the "snowball" method, so called accretion. The aim of this thesis was mainly to determine how or what for the attendance allowance is used by ist beneficiaries. Whether the amount of the attendance allowance is sufficient for its users to cover the costs of providing the social service. Whether users because of the low value of the attendance will be required to limit their individual needs and interests in some way. Whether users have identified some changes after the amendment of the Social Services Act. For the above objectives I tried to get the answers needed to solve the respective issue.
|
|
Modelling, parameter estimation, optimisation and control of transport and reaction processes in bioreactors.
ŠTUMBAUER, Václav
With the significant potential of microalgae as a major biofuel source of the future, a considerable scientific attention is attracted towards the field of biotechnology and bioprocess engineering. Nevertheless the current photobioreactor (PBR) design methods are still too empirical. With this work I would like to promote the idea of designing a production system, such as a PBR, completely \emph{in silico}, thus allowing for the in silico optimization and optimal control determination. The thesis deals with the PBR modeling and simulation. It addresses two crucial issues in the current state-of-the-art PBR modeling. The first issue relevant to the deficiency of the currently available models - the incorrect or insufficient treatment of either the transport process modeling, the reaction modeling or the coupling between these two models. A correct treatment of both the transport and the reaction phenomena is proposed in the thesis - in the form of a unified modeling framework consisting of three interconnected parts - (i) the state system, (ii) the fluid-dynamic model and (iii) optimal control determination. The proposed model structure allows prediction of the PBR performance with respect to the modelled PBR size, geometry, operating conditions or a particular microalgae strain. The proposed unified modeling approach is applied to the case of the Couette-Taylor photobioreactor (CTBR) where it is used for the optimal control solution. The PBR represents a complex multiscale problem and especially in the case of the production scale systems, the associated computational costs are paramount. This is the second crucial issue addressed in the thesis. With respect to the computational complexity, the fluid dynamics simulation is the most costly part of the PBR simulation. To model the fluid flow with the classical CFD (Computational Fluid Dynamics) methods inside a production scale PBR leads to an enormous grid size. This usually requires a parallel implementation of the solver but in the parallelization of the classical methods lies another relevant issue - that of the amount of data the individual nodes must interchange with each other. The thesis addresses the performance relevant issues by proposing and evaluation alternative approaches to the fluid flow simulation. These approaches are more suitable to the parallel implementation than the classical methods because of their rather local character in comparison to the classical methods - namely the Lattice Boltzmann Method (LBM) for fluid flow, which is the primary focus of the thesis in this regard and alternatively also the discrete random walk based method (DRW). As the outcome of the thesis I have developed and validated a new Lagrangian general modeling approach to the transport and reaction processes in PBR - a framework based on the Lattice Boltzmann method (LBM) and the model of the Photosynthetic Factory (PSF) that models correctly the transport and reaction processes and their coupling. Further I have implemented a software prototype based on the proposed modeling approach and validated this prototype on the case of the Coutte-Taylor PBR. I have also demonstrated that the modeling approach has a significant potential from the computational costs point of view by implementing and validating the software prototype on the parallel architecture of CUDA (Compute Unified Device Architecture). The current parallel implementation is approximately 20 times faster than the unparallized one and decreases thus significantly the iteration cycle of the PBR design process.
|
|
Study of physiology and searching of proteomic tools useful in suppression and detection of Varroa destructor
Holenková, Martina ; Erban, Tomáš (advisor) ; Titěra, Dalibor (referee)
This work is focused on the study of physiology and proteome of the the mite Varroa destructor and on comparison with the honeybee Apis mellifera. Varroa is currently a major problem for beekeeping, because infects most of the colonies. The control of the mite can not be done without residues both in the hive and for example in the honey or other resources used by the man. Another problem can also be the simultaneously discussed issue of the connection with the Colony Collapse Disorder. The internal anatomy of V. destructor was studied by using paraffin histology. On histological sections stained using hematoxylin and PAS was possible to observe the mite digestive system, but also egg, ovaries or brain. The primary aim of this study was to identify the proteins of mite V. destructor and bee A. mellifera as a host of this parasite. For the electrophoretic separation was used two- dimensional gel electrophoresis, where the second dimension was carried out using 12% and 15% SDS-PAGE. The most abundant spots were selected for analysis using MALDI TOF/TOF mass spectrometry. The most abundant protein identified in samples of V. destructor was hexamerin, arginine kinase or hemelipoglycoprotein precursor. Hexamerins were also identified as the major proteins in the pupae samples. On the contrary the main...
|
|
Individual human odor as a forensic trail in criminal proceeding made by contact or contactless transmission and its resistance to physical agents
Santariová, Milena ; Bartoš, Luděk (advisor) ; Chmelíková, Eva (referee)
The dissertation thesis consists of four papers that have been published in scientific journals.
Study n. 1
The need to recover evidence from water is quite common in criminal investigation. The article deals with the possibility to collect human scent from such objects and with the ability of specially trained dogs to match such scent samples with scent samples collected from detained suspects. During an experiment, designed as a blind one, it has been proved, that human scent can survive on submerged objects and can be later used for scent identification.
Study n. 2
To collect odors the Czech Republic Police use special fabric sorbents manufactured under the registered mark ARATEX. Before use the fabric sorbent is treated by water vapor sterilization. After the scent identification the sorbent is destroyed. The goal of the study was to verify if the vapor sterilization is effective enough to remove human scent that has already penetrated into the sorbent structure or in other words if the sorbent can be exposed to vapor sterilization and then used again. Specially trained dogs were used to match starting odors with target odors in the line-ups. The results showed that dogs are able to correctly match human odors even after they have being exposed to vapor sterilization.
Study n. 3
The purpose of the study was to determine the temperature at which the human scent is degraded so that a dog would not be able to identify it. In contrast to expectations, eight dogs used in the experiment almost flawlessly identified human scents from five scent donors exposed to temperatures of 100°C, 200°C, 300°C, 400°C, 500°C, 600°C, 700°C, and 800°C. Only two of the dogs were able to identify 5 of 15 scent samples exposed to 900°C. No dog identified a scent exposed to 1000°C. Our study verified heat survivability of human scent far beyond existing expectations.
Study n. 4
We tested the hypothesis that if odor fallout (the release of a human odor onto an untouched object) in human subjects exists, then holding a hand above an absorbent will produce a detectable scent which will be subsequently matched in a detection test by trained dogs. Scents were collected from seven males to sterile cotton absorbent squares. The left hand was used to get the control scent and the right hand served as the target scent. Each experimental subject was sitting and his left hand was laid down on a cotton square for 3 min. The right hand was held 5 cm above another cotton square for 3 min. The scent identification was done by two specially trained police German shepherds. Both dogs performed 14 line-ups and correctly matched the collected scents of all test subjects. The results suggest the existence of human odor fallout, whereby a human scent trace is left by humans even if they do not touch an object.
|
|
New Methods for Increasing Efficiency and Speed of Functional Verification
Zachariášová, Marcela ; Dohnal, Jan (referee) ; Steininger, Andreas (referee) ; Kotásek, Zdeněk (advisor)
Při vývoji současných číslicových systémů, např. vestavěných systému a počítačového hardware, je nutné hledat postupy, jak zvýšit jejich spolehlivost. Jednou z možností je zvyšování efektivity a rychlosti verifikačních procesů, které se provádějí v raných fázích návrhu. V této dizertační práci se pozornost věnuje verifikačnímu přístupu s názvem funkční verifikace. Je identifikováno několik výzev a problému týkajících se efektivity a rychlosti funkční verifikace a ty jsou následně řešeny v cílech dizertační práce. První cíl se zaměřuje na redukci simulačního času v průběhu verifikace komplexních systémů. Důvodem je, že simulace inherentně paralelního hardwarového systému trvá velmi dlouho v porovnání s během v skutečném hardware. Je proto navrhnuta optimalizační technika, která umisťuje verifikovaný systém do FPGA akcelerátoru, zatím co část verifikačního prostředí stále běží v simulaci. Tímto přemístěním je možné výrazně zredukovat simulační režii. Druhý cíl se zabývá ručně připravovanými verifikačními prostředími, která představují výrazné omezení ve verifikační produktivitě. Tato režie však není nutná, protože většina verifikačních prostředí má velice podobnou strukturu, jelikož využívají komponenty standardních verifikačních metodik. Tyto komponenty se jen upravují s ohledem na verifikovaný systém. Proto druhá optimalizační technika analyzuje popis systému na vyšší úrovni abstrakce a automatizuje tvorbu verifikačních prostředí tím, že je automaticky generuje z tohoto vysoko-úrovňového popisu. Třetí cíl zkoumá, jak je možné docílit úplnost verifikace pomocí inteligentní automatizace. Úplnost verifikace se typicky měří pomocí různých metrik pokrytí a verifikace je ukončena, když je dosažena právě vysoká úroveň pokrytí. Proto je navržena třetí optimalizační technika, která řídí generování vstupů pro verifikovaný systém tak, aby tyto vstupy aktivovali současně co nejvíc bodů pokrytí a aby byla rychlost konvergence k maximálnímu pokrytí co nejvyšší. Jako hlavní optimalizační prostředek se používá genetický algoritmus, který je přizpůsoben pro funkční verifikaci a jeho parametry jsou vyladěny pro tuto doménu. Běží na pozadí verifikačního procesu, analyzuje dosažené pokrytí a na základě toho dynamicky upravuje omezující podmínky pro generátor vstupů. Tyto podmínky jsou reprezentovány pravděpodobnostmi, které určují výběr vhodných hodnot ze vstupní domény. Čtvrtý cíl diskutuje, zda je možné znovu použít vstupy z funkční verifikace pro účely regresního testování a optimalizovat je tak, aby byla rychlost testování co nejvyšší. Ve funkční verifikaci je totiž běžné, že vstupy jsou značně redundantní, jelikož jsou produkovány generátorem. Pro regresní testy ale tato redundance není potřebná a proto může být eliminována. Zároveň je ale nutné dbát na to, aby úroveň pokrytí dosáhnutá optimalizovanou sadou byla stejná, jako u té původní. Čtvrtá optimalizační technika toto reflektuje a opět používá genetický algoritmus jako optimalizační prostředek. Tentokrát ale není integrován do procesu verifikace, ale je použit až po její ukončení. Velmi rychle odstraňuje redundanci z původní sady vstupů a výsledná doba simulace je tak značně optimalizována.
|
|
Test Application Methodology Based On the Identification of Testable blocks
Herrman, Tomáš ; Plíva, Zdeněk (referee) ; Racek, Stanislav (referee) ; Kotásek, Zdeněk (advisor)
The PhD thesis deals with the analysis of digital systems described on RT level. The methodology of data paths analysis is decribed, the data path controller analysis is not solved in the thesis. The methodology is built on the concept of Testable Block (TB) which allows to divide digital component to such segments which can be tested through their inputs/outputs, border registers and primary inputs/outputs are used for this purpose. As a result, lower number of registers is needed to be included into scan chain - border registers are the only ones which are scanned. The segmentation allows also to reduce the volume of test vectors, tests are generated for segments, not for the complete component. To identify TBs, two evolutionary algorithms are used, they operate on TB formal model which is also defined in the thesis.
|
|
Surface modification of glass fibers for polymer composites
Knob, Antonín ; Marek,, Aleš (referee) ; Burša, Jiří (referee) ; Čech, Vladimír (advisor)
The doctoral thesis is aimed at preparation of glass fiber reinforced polymer composites with controlled interphase formed by plasma-polymerized tetravinylsilane and tetravinylsilane/oxygen thin films. The thin polymer films of specific physico-chemical properties and thickness were deposited to improve interfacial adhesion of glass fiber/polyester composites. The fiber surface modification was performed by using plasma enhanced chemical vapor deposition in low-temperature RF plasma operating in an various effective power range and different treatment time. Test results were examined in relation to the interlayer thickness and different treatment conditions. The prepared interlayers were analyzed to evaluate physico-chemical composition and properties (XPS, RBS, ERDA, FTIR and spectroscopic elipsometry). Selected mechanical properties were evaluated by AFM. Mechanical response of plasma interlayers was evaluated by short beam shear test and direct method of testing the interfacial shear strength using microindentation. The interphase shear failure was controlled by the shear strength at the interlayer/fiber interface as follows from experimental and model data.
|
|
Project management in selected company
POKORNÝ, Radek
This work deals with project management in chosen company. It has two parts. The first part is theoretical, which is focused to theoretical treatment of the subject. It explains what is the project, management of projects, organizations of projects, processes of project management, what is target of project, communication, control, changes and risks and more. In the practical part I focused to concrete company and project management and than I analyzed concrete project. Name of the mentioned company is OHL ŽS, a.s. It is company from Spain, which acts all over the world. In the Czech Republic has the base in Brno. This company has several divisions and every of them is focused to different professional architecture. I have chosen division of structural engineering. This division builds all kinds of buildings. It could be construction of new buildings or reconstruction. To analysis of chosen project I used various business documents, contracts with investor or suppliers, document which include billing, timetable. I especially used my experience with projects of this company, and I was part of this project. Name of this project is Reconstruction of cladding including replacement windows and insulation. During the analysis of project I found a couple major gaps. If we could avoid these gaps, we could increase profit. These graphs is especially in management. At the beginning there were appointed two temporary construction managers. They doesn't care about result project, because they knew that they will not be to the end of the project. These gaps are because there is missing motivation system. Project manager can´t affect results of employees. It doesn´t depend on performance of employees, they always has the same wages. For elimination of these gaps I proposed several suggestions for improvement. The first suggestion is modification and extension of motivation system. New motivation system include personal evaluation. This evaluation depends on performance of employee. The second part is bonus from over profit. The next suggestion is make a new working position. This position would take care about controlling and project documentation. During the building project, especially at the end is construction manager very busy. It depend of decision of construction 63 manager what kind of activity will have prefer. Project documentation and administration or controlling of building works. If they are doing everything correct and technology are respect. Suggested position would take care about invoices, real work, which is done, project documentation, controlling of budget. The third suggestion is purchase of small machinery such as chipping hammers and drills. At this time they rent all devices. Rent is higher than purchase price. The last suggestion is use credit to restoration of fleet. At this time they have obsolete fleet, because the bought all cars by cash. It is not conveniently.
|