| |
|
The Controlling Study
Herda, Tomáš ; Mikovcová, Hana (advisor) ; Herda, Zdeněk (referee)
The main goal of this Diploma´s Thesis is to make a model for calculation of water and sewer rates for the company Vodovody a kanalizace Náchod, a.s. when sticking to the set criteria both from the side of VaK Náchod, a.s. and law regulations. Based on the theoretical part an analysis of customer sensitivity to the price changes using the data for last 20 years follows. Findings from the first two parts are used in risk analysis in next part. The created model calculates the water and sewer rates based on the information from the company accounting system in the way to generate sufficient financial resources to fulfill the renovation plan of infrastructural property plant and equipment and to transfer given amount to the company funds. In addition, the model monitors whether the legal condition of maximal allowable increase of profit per m3 is met. In the customer sensitivity to the price changes part the price elasticity of demand for water and sewer rates is calculated based on the data from 1995 to 2015. The assumption of inelastic demand is confirmed. Risk analysis part is deals with potential risk regarding the demand and prices. Potential impacts for the most significant risk are quantified. The analysis uses knowledge gained in the first two parts. It was confirmed that potential risks are exiting but do not have any significant impact on the going concern of VaK Náchod, a.s. The created model has been already used for the calculation of prices for the year 2017. Customer sensitivity analysis to the price changes and link to the potential risks is an additional information for VaK Náchod, a.s. which validates that nowadays, there are no significant threats which could affect the demand and water and sewer rates significantly.
|
|
The Image of the Artist in Czech Feature Films after 1948
Šlingerová, Alena ; Klimeš, Ivan (advisor) ; Přádná, Stanislava (referee)
After the Czechoslovak coup d'état of 1948, the cultural politics of the Communist Party became the only power that should organize, regulate and evaluate cultural affairs. This brouht radical changes of the status of artists. That artists who belonged to the rank of intellectuals had to follow needs of the new kind of society. They accepted orders from above and their activity was strictly controlled. Proletarian amateurs and folk art were officially encouraged. The examples of the progressive art were found in the USSR and also among personalities from the history of the national culture. Cinematography, to which was placed a requirement of topicality, also presented the new image of the artist. The most noticeable results were reached in biografical films about our classics and films exposing folklore and cultural life of the working class. The integration of an intellectual artist into the new society became a pivotal theme in movies Písnička za groš and Nezlob, Kristino. As episodic characters, we can find also completely negative types of artists - enemies of that new society. This spectrum corresponds to a general typology of people that was used in art, journalism and public speech in general: mature, confused and totally inadaptable (designed to be displaced). Exeptional cases of...
|
|
Modelling, parameter estimation, optimisation and control of transport and reaction processes in bioreactors.
ŠTUMBAUER, Václav
With the significant potential of microalgae as a major biofuel source of the future, a considerable scientific attention is attracted towards the field of biotechnology and bioprocess engineering. Nevertheless the current photobioreactor (PBR) design methods are still too empirical. With this work I would like to promote the idea of designing a production system, such as a PBR, completely \emph{in silico}, thus allowing for the in silico optimization and optimal control determination. The thesis deals with the PBR modeling and simulation. It addresses two crucial issues in the current state-of-the-art PBR modeling. The first issue relevant to the deficiency of the currently available models - the incorrect or insufficient treatment of either the transport process modeling, the reaction modeling or the coupling between these two models. A correct treatment of both the transport and the reaction phenomena is proposed in the thesis - in the form of a unified modeling framework consisting of three interconnected parts - (i) the state system, (ii) the fluid-dynamic model and (iii) optimal control determination. The proposed model structure allows prediction of the PBR performance with respect to the modelled PBR size, geometry, operating conditions or a particular microalgae strain. The proposed unified modeling approach is applied to the case of the Couette-Taylor photobioreactor (CTBR) where it is used for the optimal control solution. The PBR represents a complex multiscale problem and especially in the case of the production scale systems, the associated computational costs are paramount. This is the second crucial issue addressed in the thesis. With respect to the computational complexity, the fluid dynamics simulation is the most costly part of the PBR simulation. To model the fluid flow with the classical CFD (Computational Fluid Dynamics) methods inside a production scale PBR leads to an enormous grid size. This usually requires a parallel implementation of the solver but in the parallelization of the classical methods lies another relevant issue - that of the amount of data the individual nodes must interchange with each other. The thesis addresses the performance relevant issues by proposing and evaluation alternative approaches to the fluid flow simulation. These approaches are more suitable to the parallel implementation than the classical methods because of their rather local character in comparison to the classical methods - namely the Lattice Boltzmann Method (LBM) for fluid flow, which is the primary focus of the thesis in this regard and alternatively also the discrete random walk based method (DRW). As the outcome of the thesis I have developed and validated a new Lagrangian general modeling approach to the transport and reaction processes in PBR - a framework based on the Lattice Boltzmann method (LBM) and the model of the Photosynthetic Factory (PSF) that models correctly the transport and reaction processes and their coupling. Further I have implemented a software prototype based on the proposed modeling approach and validated this prototype on the case of the Coutte-Taylor PBR. I have also demonstrated that the modeling approach has a significant potential from the computational costs point of view by implementing and validating the software prototype on the parallel architecture of CUDA (Compute Unified Device Architecture). The current parallel implementation is approximately 20 times faster than the unparallized one and decreases thus significantly the iteration cycle of the PBR design process.
|
|
Individual human odor as a forensic trail in criminal proceeding made by contact or contactless transmission and its resistance to physical agents
Santariová, Milena ; Bartoš, Luděk (advisor) ; Chmelíková, Eva (referee)
The dissertation thesis consists of four papers that have been published in scientific journals.
Study n. 1
The need to recover evidence from water is quite common in criminal investigation. The article deals with the possibility to collect human scent from such objects and with the ability of specially trained dogs to match such scent samples with scent samples collected from detained suspects. During an experiment, designed as a blind one, it has been proved, that human scent can survive on submerged objects and can be later used for scent identification.
Study n. 2
To collect odors the Czech Republic Police use special fabric sorbents manufactured under the registered mark ARATEX. Before use the fabric sorbent is treated by water vapor sterilization. After the scent identification the sorbent is destroyed. The goal of the study was to verify if the vapor sterilization is effective enough to remove human scent that has already penetrated into the sorbent structure or in other words if the sorbent can be exposed to vapor sterilization and then used again. Specially trained dogs were used to match starting odors with target odors in the line-ups. The results showed that dogs are able to correctly match human odors even after they have being exposed to vapor sterilization.
Study n. 3
The purpose of the study was to determine the temperature at which the human scent is degraded so that a dog would not be able to identify it. In contrast to expectations, eight dogs used in the experiment almost flawlessly identified human scents from five scent donors exposed to temperatures of 100°C, 200°C, 300°C, 400°C, 500°C, 600°C, 700°C, and 800°C. Only two of the dogs were able to identify 5 of 15 scent samples exposed to 900°C. No dog identified a scent exposed to 1000°C. Our study verified heat survivability of human scent far beyond existing expectations.
Study n. 4
We tested the hypothesis that if odor fallout (the release of a human odor onto an untouched object) in human subjects exists, then holding a hand above an absorbent will produce a detectable scent which will be subsequently matched in a detection test by trained dogs. Scents were collected from seven males to sterile cotton absorbent squares. The left hand was used to get the control scent and the right hand served as the target scent. Each experimental subject was sitting and his left hand was laid down on a cotton square for 3 min. The right hand was held 5 cm above another cotton square for 3 min. The scent identification was done by two specially trained police German shepherds. Both dogs performed 14 line-ups and correctly matched the collected scents of all test subjects. The results suggest the existence of human odor fallout, whereby a human scent trace is left by humans even if they do not touch an object.
|
|
DCTOOL-A3
Bakule, Lubomír ; Papík, Martin ; Rehák, Branislav
DCTOOL-A3 is a documentation of Matlab routines developed for the design of decentralized control of large scale complex systems. The current beta version covers three areas as follows:\nReport 4.1 deals with the event-triggered control design for unstructured uncertain systems. Both non-quantized and quantized feedback is analyzed. The results are given in terms of linear matrix inequalities (LMIs). Logarithmic quantizer is used. Numerical example illustrates the effectiveness of the presented results.\nReport 4.2 presents a new decentralized overlapping wireless control design with a switched communication protocol. The method is applied by simulations on the 20-story building structure including the test of robustness of the methods against sensor failures and network node dropouts of a digital network.\nReport 4.3 presents the construction of a new decentralized wireless controller and a set of heuristic algorithms for evaluation of packet dropouts, sensor faults and actuator faults. The digital network operates at the standard frequency used in well-known widely-used industrial protocols. The results are tested at the Benchmark model decomposed into two disjoint substructures. The results are published. Thus, the details are omitted here.
|
|
Grammars with Restricted Derivation Trees
Koutný, Jiří ; Janoušek, Jan (referee) ; Vojnar, Tomáš (referee) ; Meduna, Alexandr (advisor)
V této disertační práci jsou studovány teoretické vlastnosti gramatik s omezenými derivačními stromy. Po uvedení současného stavu poznání v této oblasti je výzkum zaměřen na tři základní typy omezení derivačních stromů. Nejprve je představeno zcela nové téma, které je založeno na omezení řezů a je zkoumána vyjadřovací síla takto omezené gramatiky. Poté je zkoumáno několik nových vlastností omezení kladeného na cestu derivačních stromů. Zejména je studován vliv vymazávacích pravidel na vyjadřovací sílu gramatik s omezenou cestou a pro tyto gramatiky jsou zavedeny dvě normální formy. Následně je popsána nová souvislost mezi gramatikami s omezenou cestou a některými pseudouzly. Dále je prezentován protiargument k vyjadřovací síle tohoto modelu, která byla dosud považována za dobře známou vlastnost. Nakonec je zavedeno zobecnění modelu s omezenou cestou na ne jednu, ale několik cest. Tento model je následně studován zejména z hlediska vlastností vkládání, uzávěrových vlastností a vlastností syntaktické analýzy.
|
|
Formal Systems Based on Automata and Grammars
Čermák, Martin ; Rybička, Jiří (referee) ; Šaloun, Petr (referee) ; Meduna, Alexandr (advisor)
Tyto teze navazují na studium gramatických a automatových systémů. Na začátku, práce pojednává o regulárně řízených CD gramatických systémech využívající frázově strukturované gramatiky jako komponenty. Do systémů jsou zavedena tři nová omezení na derivacích a je studován jejich vliv na vyjadřovací sílu těchto systémů. Poté, tato práce definuje dva automatové protějšky ke kanonickým multi-generatiním nonterminálem a pravi\-dlově synchronizovyným gramatickým systemům, generujících vektory řetězců, a ukazuje, že všechny tyto vyšetřované systemy si jsou vzájemně ekvivalentní. Dále táto práce tyto systémy zobecňuje a zakládá fundamentalní hierarchii n-jazyků (množin n-tic řetězců). V~souvislosti se zavedenými systémy tyto teze zavádí automatově-gramatický převodník založený na konečném automatu a bezkontextové gramatice. Tento převodník je pak studovaný a použitý jako nástroj přímého překladu. V~poslední části jsou v této práci zavedené automatové systémy jádrem pársovací metody založené na stromově řízených gramatikách s n omezenými cestami.
|
|
Methodology of highly reliable systems design
Straka, Martin ; Gramatová, Elena (referee) ; Racek, Stanislav (referee) ; Kotásek, Zdeněk (advisor)
In the thesis, a methodology alternative to existing methods of digital systems design with increased dependability implemented into FPGA is presented, new features which can be used in the implementation and testing of these systems are demonstrated. The research is based on the use of FPGA partial dynamic reconfiguration for the design of fault tolerant systems. In these applications, the partial dynamic reconfiguration can be used as a mechanism to correct the fault and recover the system after the fault occurrence. First, the general principles of diagnostics, testing and digital systems dependability are presented including a brief description of FPGA components and their architectures. Next, a survey of currently used methods and techniques used for the design and implementation of fault tolerant systems into FPGA is described, especially the methods used for fault detection and localization, their correction, together with the principles of evaluating fault tolerant systems design quality. The most important part of the thesis is seen in the description of the design methodology, implementation and testing of fault tolerant systems implemented into FPGAs which uses SRAMs as the configuration memory. First, the methodology of developing and automated checker components design for digital systems and communication protocols is presented. Then, a reference architecture of a dependable system implemented into FPGA is demonstrated including several fault tolerant architectures based on the use of partial dynamic reconfiguration as the mechanism of fault correction and the recovery from it. The principles of controlling the reconfiguration process are described together with the description of the test platform which allows to test and verify the design of fault tolerant systems based on the methodology presented in the thesis. The experimental results and the contribution of the thesis are discussed in the conclusions.
|
|
Methodology of highly reliable systems design
Straka, Martin ; Kotásek, Zdeněk (advisor)
In the thesis, a methodology alternative to existing methods of digital systems design with increased dependability implemented into FPGA is presented, new features which can be used in the implementation and testing of these systems are demonstrated. The research is based on the use of FPGA partial dynamic reconfiguration for the design of fault tolerant systems. In these applications, the partial dynamic reconfiguration can be used as a mechanism to correct the fault and recover the system after the fault occurrence. First, the general principles of diagnostics, testing and digital systems dependability are presented including a brief description of FPGA components and their architectures. Next, a survey of currently used methods and techniques used for the design and implementation of fault tolerant systems into FPGA is described, especially the methods used for fault detection and localization, their correction, together with the principles of evaluating fault tolerant systems design quality. The most important part of the thesis is seen in the description of the design methodology, implementation and testing of fault tolerant systems implemented into FPGAs which uses SRAMs as the configuration memory. First, the methodology of developing and automated checker components design for digital systems and communication protocols is presented. Then, a reference architecture of a dependable system implemented into FPGA is demonstrated including several fault tolerant architectures based on the use of partial dynamic reconfiguration as the mechanism of fault correction and the recovery from it. The principles of controlling the reconfiguration process are described together with the description of the test platform which allows to test and verify the design of fault tolerant systems based on the methodology presented in the thesis. The experimental results and the contribution of the thesis are discussed in the conclusions.
|
guest ::
