|
Analysis of the production process of company
NEKOLOVÁ, Jitka
In the theoretical part of this work are described the manufacturing process, structure and production management, quality management in the producion and logistics and financial management. It was taken as a base for practically part of this work, where is writen about company functioning, the description of functioning of the production process and its leadership, including importance of duality and logistics in the manufacturing process. There were proposed the possibilities of improving in the manufacturing process and cost savings in storage and transport of the material. Finally was described the economic situation of the company.
|
|
Optimization of the process of recruitment and selection of employees
Doxanská, Kateřina ; Legnerová, Kateřina (advisor) ; Němec, Otakar (referee)
The aim of the thesis is based on the comparison and evaluation of the selection process and recruitment in three selected companies find the optimum process. The paper compares these HR processes with IT developer JetBrains s.r.o., a pharmaceutical company Shire Czech s.r.o. and company providing services in the field of facility management. The thesis is divided into four chapters. The first chapter is devoted to basic theoretical knowledge concerning the chosen topic. In the second chapter describes the process of recruitment and selection of employees in individual companies. The third chapter contains a comparison of selected companies, their processes and are given recommendations for individual companies, which will help improve these processes. The fourth chapter is devoted to a number of possibilities to improve individual aforementioned processes to be more efficient and lead to optimal process of recruitment and selection of employees.
|
|
SCRUM methodology and its uses in the innovation process of the company
Krbušek, Adam ; Gála, Libor (advisor) ; Bígl, Martin (referee)
Diploma thesis deals with SCRUM methodology and its uses in innovation management. The main objective of the thesis is creation of a specific framework which will enable to use SCRUM methodology in the innovation process. The thesis is divided into three parts. The first part presents theoretical framework important for the main research. This part contains literature review and research dedicated to the SCRUM methodology and innovation process. The second part of the thesis deals with mapping of the SCRUM methodology to Hladik's innovation process. This part also contains own design of the innovation management process. The third part of the thesis is dedicated to the case study. The case study uses described innovation management process for verification of the hypothesis saying that is possible to use SCRUM methodology in the innovation process. The author's contribution lies in creation of a framework which provides agile alternative to the classical innovation management models.
|
|
Process Analysis As the Basis for the Implementation of a New Information System
Kmochova, Zdena ; Říhová, Zora (advisor) ; Svatá, Vlasta (referee)
The main objective of this thesis is to analyze the processes in the company POP service, Ltd., also to analyze the current problem in this company and to recommend and propose measures which eliminate the causes of the emergence of the problem. The causes originate from the aspects of the management of people and processes are identified through the analysis of processes associated with the problem and eliminated on the basis of proposals metrics and responsibilities for these processes. The theoretical part of the thesis is devoted to concepts in the field of process management. The theoretical part characterizes these concepts process management, business processes, process analysis and process modeling methods, process maps, graphical notation for writing business processes, business process improvement and analysis organization. In the second part of the thesis is presented the examined organizations POP service, Ltd.. Based on the analysis of the current state are defined vision, mission and goals of the organization. Then there is described a procedure of the analysis of the current state, which is process analysis and proposal of selected processes, metrics and responsibilities for these processes. Methods of analysis are SWOT analysis, analysis of the activities, structured interviews and process analysis. The result of this thesis is to analyze the selection of processes of the company POP service, Ltd., proposal metrics, define jobs and responsibilities and suggestions for improving the selected process.
|
|
International involvement in the peacebuilding process on Sri Lanka
Mojžíš, Michal ; Havlová, Radka (advisor) ; Burešová, Jana (referee)
The final months of Sri Lankan civil war, the 26 year military campaign between the Government of Sri Lanka and the insurgent separatist organization Liberation Tigers of Tamil Eelam, are marked by allegations of war crimes committed by both parties of the conflict, including attacks on civilians, summary executions of prisoners, enforced disappearances, restrictions on humanitarian assistance and recruitment of children. Since the attempts to put the Sri Lankan issue on the agenda of the United Nations Security Council failed on the unwillingness of China and Russia, the UN bodies in Geneva have taken a leading role in promoting the peacebuilding process on the island. The thesis aims to analyse the impact of the Geneva-based human rights bodies, in particular of the United Nations Human Rights Council, on the process of reconciliation in Sri Lanka, for which is crucial that the alleged violations of human rights in the last months of the civil war would be properly investigated and that the perpetrators would be held accountable. In order to put the activity of the UN Human Rights Council into broader context, the paper will examine the political development in Sri Lanka since the end of the civil war in 2009 as well as the failed efforts of Sri Lankan governments to launch the process of reconciliation.
|
|
Fulfilling the criteria for saturation of the patient's needs
ŠTOKROVÁ, Veronika
The thesis deals with the realization of the criteria for saturation of the patient's needs. In the current system of nursing care, the principles of modern nursing are failing to realize and therefore we want to find out the main obstacles of this situation and the possibilities of their removal. For the purpose of the thesis there were set three objectives. The first of them has set the objective of finding out the most common problems in meeting the criteria for saturation of the patient's needs. The research showed that the nurses see the problem in a lack of staff at the wards, a lack of time, excess of documentation, excessive demands for nurses. The purpose of the second objective was to find out what supports the realization of the criteria for saturation of the patient's needs. Results have shown that what helps nurses is a positive work environment, motivation, nurse´s personality, own scale of values, salary, good leadership, organization, nursing care. The third objective was to find out the opinion of nurses on meeting the criteria for saturation of the patient's needs. It turned out that the majority of respondents think that nurses do not effectively satisfy all the needs of patients for a number of reasons: there are few nurses and they are overloaded, the nurses do their best but still cannot satisfy all the patients´ needs. We also found out that the higher patients´ needs are omitted. Less than a third of the nurses indicated that nurses effectively meet all the patients´ needs. For the qualitative part of the research, we set two research questions in advance. Which criteria nurses use in patients´ needs saturation? The research showed that time, which is very valuable for nurses and very often is in short supply, is an important criteria for the saturation of the patient's needs. Furthermore, it is knowledge and manual dexterity when nurses additionally reported a lack of education of some nurses especially within the nursing process. As the next criteria, it was mentioned the cooperation with the patient as it is necessary to engage patient himself in care planning. The next criteria is monitoring of the patient´s response, which is included in every phase of the nursing process. Furthermore, the nurses agreed on criteria, which include communication as a key skill of every nurse, then individual care, a suitable environment and utilities, education, critical thinking, effective nursing process and empathy. The second research question tried to find out which obstacles prevent nurses in effective saturation of the patients´ needs. We found out that nurses are concerned about a lack of staff at wards and the excess of administrative load, which is related to a lack of time for patients. These three factors are also obstacles for nurses and prevent them from effective satisfying of the patients´ needs. The next obstacles in satisfying the needs are burnout, reluctance of nurses to work, excessive demands for nurses, poor workplace relationships, a lack of evaluation both in a form of praise and appreciation, and finance. We also found a lack of information, which is related to a lack of time, as nurses do not have a chance to collect all the information concerning the patient. As another possible obstacle, nurses also mentioned personal problems. The results of the thesis can be used as a small contribution to currently ongoing effort of the Czech Association of Nurses.
|
|
Design of Experiment for Non-Stationary Processes of Production
Jadrná, Monika ; Macák, Tomáš (advisor)
The doctoral thesis is concerned with the services sector and the area of mass production. Particularly, the optimization of the product portfolio of the travel agency and the optimization of production rounds of ammunition.
The theoretical part deals with the current overview of discussed topic. Further, the terminology and methods of the decision-making process are defined to support decision making. The theoretical basis of research focused on the choice of appropriate input variables in the area of services, and on the choice of a particular material option in the production area and appropriate equipment for the production. The theoretical part forms the basis for the practical part of the thesis.
For the doctoral thesis was chosen an enterprise operating in the defined sector. Product portfolio for the services sector is optimised using Fuzzy logic and Fuzzy sets so that the enterprise can maintain its competitiveness in todays highly ambitious market. Product portfolio for manufacture is optimised for achieving desired properties of the product.
The main aim of the thesis is to propose a new methodological approach for the management of selected business processes in their nonstationary time course. The aim of the practical implementation is to verify the functionality of the proposed methodological approach, both in the area of services and in the field of mass production.
|
|
Freezing technology of bull sperm in relation to its survivability and fertilization ability
Doležalová, Martina ; Stádník, Luděk (advisor) ; Jiří, Jiří (referee)
The aim of optimalization the insemination doses production is to provide the highest fertilization ability of spermatozoa during the demanding proces of processing fresh semen and its subsequent cryopreservation. Temperature changes causes spermatozoa damage during the cooling and freezing. Spermatozoa is exposed to cold shock and many others limiting factors, which leads to cell death and therefore to decline of fertilization ability of thawed insemination doses. For increasing spermatozoa resistance, exactly the plasma membrane resistance against cold shock was fraction of egg yolk LDL cholesterol (low density lipoprotein) at various concentrations into the comercially produced diluents added. It is believed that LDL acts possitively to plasma membrane and helps to maintain the fertilization ability of spermatozoa after thawing. Following step in the proces of insemination doses production is slow cooling of diluted semen and equilibration, when the straws are store at cooling box for 30 minutes to 240 hours. This period is necessary to penetrate of certain diluent components into the spermatazoa also maintain the balance between their intracellular and extracellular concentration. Also important is subsequent freezing temperature gradient of insemination doses. The most suitable freezing method is based on computer controlled temperature decline in freezing chamber which allows the precise control of ice crystals formation that could tear and kill the cell.
During 2012 to 2016 was repeatedly collected semen from the group of breeding bulls (n = 27, Holstein and Czech Fleckvieh breed) at AI centre. Semen which fulfill the standard entrance conditions in first step was evenly into several parts divided. For dilution the three types of comercially diluents AndroMed, Bioxcell and Triladyl with and without LDL addition were used. Into the diluents AndroMed and Bioxcell the concentration of LDL 4 %, 6 % and 8% into the dilent Triladyl 6 %, 8 % and 10 % was added. Diluted semen was filled into the glass capillares with volume 0,1 ml and temperature +4 °C. Subsequently the sample was placed to cold bath (0°C) for 10 minutes. Then the volume of capillare with physiological solution (37 °C) was mixed and for next 120 minutes was incubate. The effect of cold shock to proportion of live spermatozoa was evaluated by using Eosin and Nigrosine staining technique during heat test of spermatozoa survivability after spermatozoa heating and after 120 minutes of incubation.
The more suitable semen diluents which provide the higher spermatozoa resistance against cold shock were AndroMed and Bioxcell. Together the possitive effect of LDL addition into the diluents to lower decrease of proportion of live spermatozoa during heat test was found (P<0.05). The most suitable LDL concentration which had a favorable influence at spermatozoa resistance against cold shock was 6 % in diluent Bioxcell. Values of the proportion of live sperm were higher at the beginning of the heat test (+1.31% to + 3.2%) and after 120 minute incubation (+5.82% to +8.41%) compared to other diluents with and without addition of LDL.
In the next step the process of equilibration was optimized, is an important part of insemination doses production. The effect of the length of equilibration for subsequent fertilization ability of spermatozoa was evaluated using spermatozoa motility based of CASA and proportion of live spermatozoa after thawing and during heat survival test lasting 120 minutes (37 ° C). Suitable semen was diluted by comercially used diluent AndroMed based on soya lecithin, filled into the straws (0.25 ml), cooled and equilibrated in cooling box for 30, 120 and 240 minutes and freezed in programmable freezing box applying four types of freezing curves differing in temperature rate decline. There was used standard and by producer recommended 3. phase freezing curve, then 2. phase freezing curve, and 3. phase freezing curve with slower as well as rapid decline of temperature rate in freezing chamber, compared with standard freezing curve. The highest spermatozoa motility was found using 240 minutes of equilibration by +2.72% and +4.58% compared to other lengths of equilibration (P <0.05 to 0.01). The highest proportion of live spermatozoa was found using 120 minutes of equilibration (+6.87 % and +8.68 %). The highest average spermatozoa motility during heat test after thawing was achieved by using 2. phase freezing curve (from +2.97% to +10.37%, P <0.05), also in the proportion of live spermatozoa (from + 4.37% to +8.82%, P <0.01). When evaluating interaction between the length of equilibration and freezing curve (standard 3. phase and 2 . phase freezing curve), the highest average spermatozoa motility and proportion of live spermatozoa using 240 minutes of equilibration by both freezing curves was reached, there was no statistically significant differences. As well as, in all evaluated parts of this study the individual differences between ejaculate of bulls and within semen from one bull (P <0.05) as secondary effect were found.
To maintain good fertilization ability of semen during cryopreservation is necessary to increase the spermatozoa resistance against cold shock using addition of correct concentration of LDL into the commercially used diluents AndroMed and Bioxcell. Subsequently the fertilization ability of insemination dose is influenced by cooling, the length of equilibration and freezing. The length of equilibration 120 minutes and more as well as gentle way of freezing according to freezing curve, which ensures a gradual decrease of temperature in freezing chamber provided the higher average spermatozoa motility and proportion of live spermatozoa.
|
|
Role of the nurse in screening for depression in the elderly.
VRZALOVÁ, Monika
The diploma thesis deals with problems of depression in older people. Mainly the work is focused on identifying and analyzing the role of nurses in screening for depression in older people in primary care, acute care, long-term care and home care. This thesis was focused on theoretical direction and was used the method of design and demonstration. In this thesis was set one main goals with five research questions. The main goal was to identify and analyze the role of nurses in screening for depression in the elderly. RQ 1: What is the role of the nurse in screening for depression in the elderly? RQ 2: What is the role of the nurse in the primary care in screening for depression in the elderly? RQ 3: What is the role of the nurse in screening for depression in hospitalized patients in acute care? RQ 4: What is the role of the nurse in screening for depression in seniors in long-term and home care? RQ 5: What rating scales and methods are used in screening for depression in the elderly? The thesis introduce the concept of depression. The following are specified the causes of and the important factors that affect depression in the elderly. It also deals the differences in the clinical symptomatology of depression in old age. It explains possibilities and various barriers in the diagnosis of depression. Another chapter introduces complete geriatric examination, diagnostic classification systems, possible screening methods and scales for detection of depression in the elderly population. It also deals methods of pharmacological and non-pharmacological treatment and its possible complications associated with older age. By reason of increased suicide rate caused by depressive disorder the issue of suicidal behavior in the elderly is introduced. The next chapter deals with the nursing process, which is used by nurses in practice. It consists of the evaluation of the patient's health condition, making nursing diagnosis, creating nursing plan and subsequent implementation and evaluation. The nursing process is also needy for providing quality care. The nursing process in the stage of nursing diagnosis, introduces possible nursing diagnosis for a patient suffering from depression, which are based on the latest classification. Finally is described the role of nurses in screening for depression in the elderly in different health facilities and their contribution to the timely evaluation of depression in the elderly. This chapter introduces the role of nurses, nursing screening and collaboration with a physician. The role of nurses in screening for depression in different medical facilities is based on the first phase of the nursing process of assessment. On the basis of objective and subjective information, the nurse will assess the overall health and mental condition of the patient. Primarily, it was investigated what is the role of the nurse in screening for depression. On the basis of content analysis and synthesis it was necessary to used and processed domestic and foreign literature. A number of relevant sources are the results of various studies and Meta-analyzes, mostly from abroad, but also from the Czech Republic. The thesis can serve as a basis for nurses. The result of this thesis is to create e-learning material available for students in the Faculty of Health and Social Sciences of South Bohemia in Ceske Budejovice in the tutorial called Moodle.
|
|
Implementation of the processes in company
Večerka, Jan ; Štůsek, Jaromír (advisor)
For my diploma thesis theme I have chosen: Implementation of the processes in company. The reason is, that in 2010 I have joined this company as an system administrator into a small team.
Our company is German company with the main focus on the hardware and software in ATM, POS and all different kind of payment methods. As the market was getting more full with the hardware and to sell new ATM machine or a POS device was not more often than once per five years, the company has realized, that if they want to keep growing, they have to focus as well on the services. The aim was to sell with the software and hardware as well as a managed service attached to this contract. This would mean, that our company would have some link to the customer and could offer for them more and more standardized or tailored solutions. In the beginning it was more of a garage type of solutions and the services provided were done in a way, that the team was small and the customers and service delivery managers knew the team, who provided the service. When the service was not working, it often came via email and through escalation from customer.
With the time the business grew and so the amount of the issues and incidents. The management has recognized, that it can not be handled this way anymore and therefore the Prague department was established to setup the processes like incident, problem, change management as well as with the time other. The framework, which was chosen was ITIL.
In this thesis I would like to focus on the way, which was started and is still continuing, of a way, how the processes were established, what were the difficulties and how we have over the years progressed.
In the end I will summarize, how far we have come during this five years and from which maturity level we grew into which maturity level.
|
guest ::
