|
|
With wall heating systems
Bendová, Martina ; Topič, Jan (referee) ; Počinková, Marcela (advisor)
This work deals with the topic "Systems with wall heating". On this theme is elaborated theoretical part. Further experimental part, which deals with the measurement of wall heating and comparing the results with the software CalA. Subsequently, this topic is applied to the specified building in which the wall heating, among other things dealt with. The project addresses the design of central heating, water heating, water heater design power units and air tempering lawn for future newly built free-standing facilities football club. The project is designed in two versions. In the first variant of the heat source heat pumps air-water. In the second variant is the heat source hot water pipe which is connected to transfer water-water station with plate heat exchangers.
|
|
|
Pressure loss valves in heating systems
Náglová, Michaela ; Adam, Pavel (referee) ; Počinková, Marcela (advisor)
The theoretical part of the thesis deals with the hydraulics of heating systems. The aim of the project is a design of the heating and hot water preparation system for an apartment building. The building has 6 above-ground floors and 2 underground floors. Two different options of heating systems were designed, comparison and results are presented in the thesis. In the first case the heat source during the winter season and for water heating, where chosen two gas condensing boilers, situated in separated room on the second underground floor. In the second case, each apartment has its own gas condensing boiler. The experimental part of the project deals with measurements of pressure losses in water armatures used in heating systems. The aim of this part is the determination of coefficients of added resistance for uncontrolled elements, which are normally presented as tabular value. In thesis are presented results for a ball valve, backflow preventer, filter, for slide valve and thermostatic valve. Measurements for thermostatic valve where done with different settings and results are compared with parameters listed in the datasheet.
|
|
|
Heating of the Polyfunctional Object
Slovák, Zdeněk ; Topič, Jan (referee) ; Vendlová, Lucie (advisor)
This thesis deals with the design of the heating system in a Polyfunctional building. The design is solving heating of a Polyfunctional Object in Kostelec nad Ohří. The building has basement and two floors. The building is heated by means of panel, tubular and floor convector heaters. The source of the heat is located in the boiler room in the basement.
|
|
|
Design of heating of primary school
Pánková, Pavlína ; Vyhlídalová, Karolína (referee) ; Horká, Lucie (advisor)
The goal of this master's thesis is to design the heating system for the existing building of an elementary School. The thesis is divided into three parts. In the first theoretical part, I discusses heat transfer methods, the influence of covers on heating elements, and the determination of radiant and convective power components. The second part solves the heating system's design in three heat source variants. The first option comprises six heat pumps. The second option includes a combination of direct evaporation for air handling units and heating using heat pumps. The third option involves the installation of gas condensing boilers. At the end of the second part, a technical report is written and drawing documentation is attached. The last third part is dedicated to the experimental measurement, in which the effect of the front plate on the performance of the heating element was ensured.
|
|
| |
|
|
Wireless Security System
Matyáš, Jan ; Kočí, Radek (referee) ; Hanáček, Petr (advisor)
This thesis describes the design and implementation of portable wireless security device for monitoring object. The device consists of a control module allowing user to set and monitor current state of the measuring module which communicates with the control module wireless using the ISM band. The device is battery powered and highest possible battery life per charge is required.
|
|
|
Indoor environment in residential buildings
Hudcová, Nikola ; Formánek, Marian (referee) ; Počinková, Marcela (advisor)
The master‘s thesis deals with the design of heating and hot water preparation for the panel house G57 in Brno. The thesis consists of three parts, namely theoretical, computational and experimental. The theoretical part deals with the indoor environment of buildings. The calculation part deals with the complete design of the building's heating. Two variants of the design of the heat source are made, the first variant is a central heat supply and the second is a cascade of three heat pumps. Hot water preparation, fittings, circulation pumps, security devices and other equipment are designed for both heat source variants. The experimental part contains the measurement of selected parameters of the indoor environment in 3 different objects for housing. The task of the measurement was to find out whether the criteria of the indoor environment of the objects for living are met.
|
|
|
Heating of the production facility with administration
Bardarov, David ; Horká, Lucie (referee) ; Topič, Jan (advisor)
This Bachelor thesis consists of three main parts. The first one is theoretical and describes heating systems, their types and circulation pumps. The second part consists of calculations and describes heating framework and heating water in an industry hall with office in region Troubsko. It is a two-floor building with no basement. Both floors will be heated by board and tubular radiators. The source of heating will be two gas condensation boilers. There will be complete calculations and suggested important elements needed for running the whole system compiled in this Bachelor thesis. In the final part I processed technical report and drawing documentation.
|
|
|
Design of heating system for multifunctional building
Illichman, Petr ; Horák, Petr (referee) ; Vyhlídalová, Karolína (advisor)
The Bachelor thesis is divided into the theoretical part, the computational part and the project. Theoretical part consists of the basic description and the division of the fittings in a heating. In the computational part, I deal with heating proposal and a hot water preparation in the building of a multifunctional house st. Anny, located in Brno. The building has a four floors and the basement, commercial space, garages and apartments. The building designed with the gas condensing boiler and the indirect heating tank for domestic hot water use, the heating of the building is supplied the by plate and tube radiators. The project contains technical report and drawing documentation.
|
|
|
Heating of the kindergarten
Ryšavá, Veronika ; Počinková, Marcela (referee) ; Topič, Jan (advisor)
The aim of the bachelor thesis is to design heating system and hot water heating of the nursery school in Zlín. It is a non-cellar structure divided into several single-storey pavilions, which are interconnected by a connecting corridor, one pavilion being two-storey. The heating is solved by radiators, slab, tubular and convectors. The source of heat is gas condensing boilers. The theoretical parts deals with circulating pumps.
|
guest ::
