|
|
Steel load-carrying structure of production hall with bridge crane
Štulrajterová, Terézia ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
This bachelor thesis deals with the design and assessment of a steel load-bearing structure of a two-aisle production hall. That hall has a rectangular ground plan of a width 32 m (20 + 12 m) and lenght 54,54 m (9 modules distanced 6 m from each other). The main aisle is 10 m high and inside is located a overhead crane with carrying capacity 5 t. The second aisle is used as a storage area for materials that have already been produced. The skeleton of production hall is made of a ten transversal bindings. Lattice trusses are hinged mounted on constraint pillars of solid poles. The hall is situated in the north of the Czech Republic in the city of Děčín.
|
|
|
Static verification and variant design of steel structure of administrative building of Gasworks in Brno - Radlas
Štulrajterová, Terézia ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
The subject of this master´s thesis is a recalculation of the existing structure, design, static analysis and economic comparison of two variants of this bearing structure of the administrative building Jihomoravská plynárenská located in Brno. Ground plan dimensions and height of both these variants are based on existing disposition of the building. The diameter of the circular floor plan is 16,088 m and height of the structure is 29,46 m. With this new proposal of solution A and B, lower weight of structure in comparison to the existing state has been reached. Both variants have a bearing column in the middle of floor plan and new solution of ceiling structure. The most advantageous from the economic and assembly point of view is variant B. Design of this variant was processed in detail.
|
|
|
Multi-storey building
Hasil, Tadeáš ; Pilgr, Milan (referee) ; Sýkora, Karel (advisor)
The subject of the bachelor´s thesis is structural design multi-storey building a department store. The structure is designed for the site Brno.Static calculation is solved by a combination of manual calculation and calculation using software R-STAB.The steel structure is placed between the reinforced concrete towers.The purpose of reinforced concrete is vertical transport. Transversal course is dividet to 6,0+3,0+6,0=15m.Longitudal course is dividet to 9x6,0m = 54m
|
|
| |
|
|
The steel construction of a volleyball hall
Polerecká, Katarína ; Barnat, Jan (referee) ; Štrba, Michal (advisor)
The aim of this work is design and assessment of the steel roof structure of the hall object designed for volleyball training and events located in Brno. Ground plan dimensions are in the shape of a rectangle with a floor space 30 x 40 m. The hall consists of 9 cross-lenks spaced by 5 m. The truss girders are arc-shaped, pinned on column. Structure is divided into two areas with hight diference of 6 m. Spatial stiffness is ensured by a system of longitudinal, diagonal strut and purlins.
|
|
|
Rebuilding a Family House
Zlámalová, Pavlína ; Požár, Michal (referee) ; Švaříčková, Ivana (advisor)
The thesis deals with the reconstruction of the family house. The main aim of my thesis is assessment of the existing floor slab and designing of reinforcement due to lack of static part of design documentation. Internal forces on the slab are obtained by using finite element method on which the slab is designed. Due to superstructure of one extra floor above original structure it is necessary to make the hole for the staircase into the existing ceiling construction and demolition of loadbearing wall for disposition improvement. Intervention into the original construction has the effect of redistribution internal forces. At this case additional reinforcement of floor slab is necessary. For additional floor slab are selected and designed CFRP carbon straps. Rotate rib is being prepared instead of original demolished loadbearing wall which will be connect with original floor slab by using of stirrups. All calculations were performed in accordance with valid standard.
|
|
|
The footbridge for pedestrians and cyclists in Zvolen
Hric, Fedor ; Bajer, Miroslav (referee) ; Šmak, Milan (advisor)
Diploma´s thesis is about timber structure of footbridge for pedestrians and cyclists over the Slatina river in the city of Zvolen as cast of alternatives. In the first alternative is footbridge designed as a simple arched beam, made of glued laminated timber. Footbridge is also designed with semi through bridge deck, made of structural timber. The second alternative is designed as a tied arch structure. At this alternative is the bridge deck left unchanged(material, sizes of members). Both alternatives are attested by currents standarts.
|
|
|
Spatial reinforced concrete frame of the industry object
Body, Roman ; Šulák, Pavel (referee) ; Šimůnek, Petr (advisor)
The aim of bachelor thesis is design and appraise the structure of the spatial reinforced concrete frame of the industry object founded on foundation slab. The structure is without the cladding. To the calculation of internal forces is used computing software Scia Engineer 2013.1. Roof slab, rung, beam and column are designed. Designed life of the structure is 50 years.
|
|
|
Cast-in-place basement of cottage in Kronfelzov
Renczes, Gábor ; Bažant, Zdeněk (referee) ; Strnad, Jiří (advisor)
This thesis deals with the design and assessment of all supporting parts of a cast-in-place basement of a cottage in the town Kronfelzov. The thesis includes a technical report, static analysis, drawing documentations and visualizations. The calculation of the internal forces was performed by the software Scia Engineer. The drawing documentation consist of a shape and reinforcement drawings of the supporting parts.
|
|
| |
guest ::
