|
|
Residential Building - Lesná
Michna, Adam ; Drobníček, Ladislav (referee) ; Menšíková, Naděžda (advisor) ; Matějka, Libor (advisor)
Bachelors thesis „Residential building Brno – Lesná“ is processed in form of project documentation. This thesis investigates the apartment building with four apartments and an underground garage with stacking parking system. The plot is situated near housing estate Lesná, close with Diviš district, which is made up of small family houses. On the plot are situated five dimensionally similar houses, this work deals with one of them in detail. This is a building with two underground floors, two floors above and a residential attic. The underground part in which there is a parking space, use of reinforced concrete structure, above-ground part is made up of a brick wall system. The house is covered with wooden gable roof truss purlin system. The house has two two-room apartments and two maisonettes three-room apartments.
|
|
|
Multifinctional gym hall
Holemy, Ondřej ; Párová,, Jitka (referee) ; Rusinová, Marie (advisor)
The master‘s thesis concerns about the freestanding multipurpose sport hall with a base for sportsmen and spectators and its associated sport and regeneration centre. The object is situated in a city district Brno Bohunice. The designed building is divided into a single storey multipurpose sport hall and an outbuilding with two above-ground floors and a partial third floor above the entrance part of the building. Object’s plan shape forms a rectangle with recessed entrance part. The load-bearing structure consists of a combined column and wall construction system. The main multipurpose hall is roofed with arched glulam laminated trusses, which are supported by steel columns covered by sandwich panels. The outbuilding’s vertical load-bearing structure is formed by clay blocks. The horizontal load-bearing structure is formed by prestressed concrete floor slab. The building is based on shallow foundations. The object is designed to be barrier-free for sportsmen and visitors as well.
|
|
|
Apartment building at the vineyard
Kocmanová, Michaela ; Janda, Lukáš (referee) ; Brzoň, Roman (advisor)
The aim of the bachelor’s work is a composition of project documentation for the construction building of apartment building. The object is situated on the cadastral area of Viničné Šumice on plot number 1912/21. The apartment building is designed as separated, three storeys, flat roof building without basement. There are eleven apartment units in total, from which one is designed for people with movement disabilities. To each apartment unit belong one basement cellar and part of a garden. There are two separated parking areas with thirteen parking places in total. The building stands on foundation strips. The construction system of the object is wall system. External walls are made of Porotherm brick blocks with thermal insulation from expanded polystyrene. The inside vertical load-bearing constructions are made of acoustic brick blocks with mortar pockets. The horizontal load-bearing constructions are made of reinforced concrete slabs. The building is roofed with single layer flat roof.
|
|
|
Apartment building Skřivánek
Jalamudisová, Denisa ; Pilný, Ondřej (referee) ; Kolář, Radim (advisor)
This bachelor’s thesis processes project documentation for cunstruction works of one new apartment building in Ústí nad Labem. It is a four storey non-basement building including 10 apartments, 2 of them are intended for diasbled people. Apartments on the ground floor have barrier-free tercce and each apartment on the higher floors has a spacious balcony. Every apartment has own storage space in common areas. Masonry is designed from ceramic masonry prefabric blocks, external masonry is filled with mineral wool providing thermal insulation. The ceiling system is made from reinforced concrete slabs, roof is sloping hipped made of wooden lattice trusses.
|
|
|
Cultural center Puppet
Kuchaříková, Andrea ; Kalánek, Ing Jiří (referee) ; Brzoň, Roman (advisor)
This diploma thesis presents a project documentation for construction of a community centre with a restaurant. Its construction site is located on the outskirts of town Jaroměřice nad Rokytnou, Poděbradova street. The building is composed from three parts, which are connected to each other. The first part houses the restaurant with its facilities. This part is a single floor structure covered by a flat green roof. Its façade is formed by white boards composed into an asymmetrical pattern. The second part serves as a backstage area where all the necessary facilities are located. This second part of the building is as the first part a single floor structure covered by a flat green roof. Its façade is formed by façade timber boards. The main entrance is located in the middle part, which is the third part the building. It has two floors and it houses an auditorium, a bar and amenities. Its façade is formed by trapezial boards. The construction system is formed by load bearing walls and by prestressed concreted floor panels or in some parts by cast-in-place reinforced concrete slabs. The building has strip foundations. Its interior walls are built from sand-limestone bricks with acoustic properties. The perimeter walls are covered with ventilated façade with mineral wool thermal insulation. The heating of the community centre is powered by gas boiler connected to single-vent chimney with ventilation shaft.
|
|
|
House on a Sloping Building Site
Pánková, Aneta ; Šafářová, Markéta (referee) ; Lavický, Miloš (advisor)
The subject of my bachelor´s thesis is to design a house on a sloping building site at a level of project documentation for the buidilng realization. The building object is located in the village of Velke Porici and designed for a family of four. The building has a basement with a one above-ground floor with a wall construction system of brick blocks. Foundation of the house is done on the strip foundations and the house is covered with a flat roof. Entry to the house is solved trough the above-ground floor where there is a rest area. In the basement spaces is a daily part of the house. The building project is completed in accordance with layout, architecture and structural design and safety in use.
|
|
|
Multifunctional house Lignum
Jakubčánin, Marek ; Šteffek, Libor (referee) ; Ostrý, Milan (advisor)
The diploma thesis focuses on a mixed-use building with a rectangle-shaped ground plan in Žilina city. The object is four-storey and with no basement. It is split into two sections. The first one provides a space for three operations in northeastern part of the first floor with an attached parking lot. These operations are not further described in this project and depending on investor´s requirements some changes may apply. The second part is an apartment housing section. The first floor contains utility rooms such as storage and buggy room. The housing sections are accessible with two entrances. The apartments are located from the second up to the fourth storey and are designed 1+KK, 2+KK,3+KK and 4+KK respectively. The apartments are assigned with parking spaces isolated from operations parking lot. Vertical bearing walls are made of clay blocks POROTHERM 30 AKU P+D, which are used also as internal bearing party. Internal bearing walls placed in apartments are made POROTHERM 25 AKU P+D and completed by POROTHERM 14 PROFI P+D. Walls will be placed on conrete and reinforced concrete strip foundation. Building has external thermal insulation made by EPS gray 200mm thick. Horizontal load-bearing structures are made by reinforced concrete. Object has flat roof with minimum slope 3%. Damp proof is made by PVC-P membrane. As thermal insulation is used mineral wool.
|
|
|
Apartment building
Hudeček, Vladimír ; Vorlíčková, Petra (referee) ; Kolář, Radim (advisor)
The aim of the bachelor’s work is a composition of project documentation for the construction building of apartment building. The object is situated on the cadastral area of Slavkov u Brna on plot number 354/147. The apartment building is designed as separated, partition in three parts. Four storey part without basement and two parts with basement. There are ten apartment units. To each apartment unit belong one basement cellar. There is one parking area with fifteen parking places in total. The building stands on foundation strips. The construction system of the object is wall system. External walls are made of Porotherm brick blocks with thermal insulation from mineral wool. The inside vertical load-bearing constructions are made of acoustic brick blocks with mortar pockets. The horizontal load-bearing constructions are made of reinforced concrete slabs. The building is roofed with single layer flat roof.
|
|
|
Apartment building on a sloped site
Bednář, Jiří ; Bečkovská, Tereza (referee) ; Bečkovský, David (advisor)
The aim of my master's thesis is a project of a new apartment building on a sloped site at a level of the documentation for the structure realization. The building is partly basement with four above-ground floor. Individual floors up recede and are roofed with flat roofs. The structural system of the basement part is made up of permanent shuttering and the above-ground part is made up wall of cross laminated timber construction panels KLH. The project of the building is in accordance with the development plan of Kopřivnice and with the current street built. The work puts great emphasis on layout including security of the construction in terms of statics, architecture, energy savings and safety at utilizing the structure.
|
|
|
Family House with workroom
Lipusová, Noemi ; Potužník, Michal (referee) ; Mátl, Miroslav (advisor)
The subject of this bachelor´s thesis is processing of building – technical part of project documentation for realization of new building of family house with workroom in town Třinec. Family house has two above-ground floors a two shed roofs. House is designed for a family of four. The establishment (hairdresser‘s) has a shed roof. The building is designed as a wall construction system (Porotherm). The project will also include the parking lots and pavements.
|
guest ::
