|
|
Identification of human iris
Horníček, Vladimír ; Maršálek, Roman (referee) ; Frýza, Tomáš (advisor)
This bachelor‘s thesis deals with eye iris human identification. The main advantage of eye iris human identification is individuality and accuracy of human eye iris. In the beginnig of this thesis there are described the main biometrics terms. The second part of this work engages theoretical basics of identification system activity and functionality. By using theoretical datas, there is designed and created an aplication in the Matlab simulation program. This aplication is able to creates and then compares the iris human. In the end of this thesis there are a results analysis.
|
|
|
Realization of fingerprint scanner
Kovář, Martin ; Sekora, Jiří (referee) ; Mézl, Martin (advisor)
This master’s thesis deals with the issue of scanning human fingerprints, which is currently very topical and represents the most widespread biometric technology. The theoretical part of the work acquaints the reader with basics of dactyloscopy and biometrics and concerns technologies used for fingerprinting, image preprocessing methods and commercially available contactless optical scanners. The practical part is a realisation of a contactless optical scanner based on a Raspberry Pi minicomputer, implementation of preprocessing algorithms in Python and testing of the device from the perspective of image quality.
|
|
|
Penetration Tests of Speaker Verification System
Nguyen, QuangTrang ; Rohdin, Johan Andréas (referee) ; Plchot, Oldřich (advisor)
The aim of this bachelor thesis is to create a penetration tests of speaker verification system with the use of the speech synthesis method. This work studies methods of spoofing against automatic speaker verification system. Before designing of the test set, the system and it's components that were used in this work are described. The last chapters of this work include a description of the process of designing the test set, realization of the designed test and the last part contains evaluation of the results and answers the question if it is possible to penetrate a verification system with the use of speech synthesis.
|
|
|
Implementation of the VERICUT System into the Technological Process of Production
Gerbel, Jakub ; Fiala, Zdeněk (referee) ; Slaný, Martin (advisor)
The topic of this bachelor thesis is implementation of the VERICUT verification system into the manufacturing process in cooperation with company JHV Engineering. Based on the theoretical analysis is performed practical part. The 3D model of the CNC machining center was modeled in system Creo Parametric and its kinematic were compiled in the environment of VERICUT system. After evaluation the results, it turned out that there are some deviations between the simulation and the real process. By creating such an exact virtual copy of the machine, or digital twin, collisions can eliminated and production can be planned more efficiently
|
|
|
Verification of FPGA Generic Interconnection System
Bartoš, Václav ; Martínek, Tomáš (referee) ; Puš, Viktor (advisor)
This thesis deals with design, implementation and realization of simulation verification of generic interconnection system for FPGA chips. This system is part of the NetCOPE platform developed in the Liberouter project, within which was this work done. In the beginning, an usual methods of verification in SystemVerilog language are described. Then there is a brief description of the interconnection system, aimed especially to aspects important to verification. The main part of the thesis is design of verification environment and control program of test for all three components of the tested system. It started form the earlier described principles, that are established in the Liberouter project, and it add some more features. All components of the verification environment are designed to be general and reusable, so they can be used also in other verifications related to the interconnection system. At the end of the thesis, there are discussed results of the verification, found bugs and the general advantages of simulation verifications.
|
|
|
Verification of digital circuit Microcore GNSS Baseband
Peroutka, Ondřej ; Fujcik, Lukáš (referee) ; Dvořák, Vojtěch (advisor)
The topic of the master´s thesis is to verify Acquisition Engine and Tracking Engine in the Microcore GNSS Baseband digital circuit from Honeywell. Theoretical part contains a brief introduction into the satellite position determination, basic principles of the verified blocks is given and UVM methodology is introduced. Practical part contains requirements, test cases and test procedures. The verification environment is also described. In the last part of the thesis is the verification process and it´s results.
|
|
|
Multicameras Biometric Gateway to Identify People
Kosík, Dominik ; Orság, Filip (referee) ; Goldmann, Tomáš (advisor)
This thesis is about creating biometric gate to identify people. The Identification is achieved with 5 RGB cameras and one thermal camera. Thermal camera is used for detection of person. Then, from images acquired from RGB cameras, is created 3D model of photographed person. This model is then used for the identification. However due to inaccuracies in created model, identification isn't precise enough. Because of that, it's necessary to modify used algorithms processing 3D model, so better precision is achieved.
|
|
| |
|
|
Biometric Performance Testing of Signature Technology
Homola, Petr ; Drahanský, Martin (referee) ; Fiala, Jiří (advisor)
This bachelor thesis is focused to possibilities of biometrics of dynamics signature. The first part is devoted to general explanations of basic concepts and standards for measuring effectiveness. Explains the problematics of processing characteristics of the signature. Descibes the equipment of the appropriate components for capturing the dynamic signature. The main section deals with testing abillities of verification of user and identification and testing the posibillities of deception devices. Presents design and implementation of program for identification. Records the progress and results of all performed tests.
|
|
|
Method for Energy Efficience Simulation of Machine Tools in Design Stage
Tůma, Jiří ; Demeč, Peter (referee) ; Suchánek, Rostislav (referee) ; Blecha, Petr (advisor)
Ph.D. thesis is focused on the design of the method for simulation of energy demands of machine tool in operation at the stage of its development. Proposed method is developer on the basis of literature search in science and in industry. The method itself is composed of five related steps, that must be realised in the proper order in order to create a relevant energy profile of a machine tool. The output from the method are simulated data providing a course of comsumed energy and required power which are time dependent. Output data are obtained on the basis of the drive system simulation of machine tool through G-code, that is interpreted for simulation by the compiler into the matrix. It contains data necessary for controlling of machine tool, such as the required end points of the tool and required feed rates, to which is assigned a time value. G-code is partially time parametrized. It is then followed by full time parametrization through a of mathematical model of drive mechanisms and due the synergy of software for drive mechanisms control (Matlab Simulink) and software for physical simulation (MSC Adams) is processed into output data. As an input parameter figures also coefficient used as multiplier of the normal force of driving mechanisms, which is a function of feed rate. This loss function is obtained experimantally. In the context of Ph.D. thesis were conducted two experiments, used to verify the developed method. For each experiment is proceeded according to estabilished method and it is included a comparsion of simulation and measured data for various operating modes. The proposed method, described in the Ph.D. thesis, allows designers to summarize the energy demand of the proposed machine before its production. When correctly interpreted, the results of the method can serve as a basis for improving the energy profile and thereby increasing the energy efficiency of the machine tool.
|
guest ::
