|
|
The reduction of pores in welds
Němečková, Monika ; Molliková, Eva (referee) ; Němec, Karel (advisor)
This bachelor thesis dealt with the reduction of pores in the welds. These welds were in pressure stacks which are made by the Bosch company. There are Common Rail diesel injection systems in which are those pressure stacks used in. An analysis was compiled, which consisted of dates of scrap rates in the yeas 2016, and the values in which the media changed in washing machines where the pressure stacks were cleaned of grease. From the following graphs is obvious when the scraps appeared mostly and according to these results there is a proposal to reduce the porosity in the welds.
|
|
|
The High Pressure Fuel System Application for CI-engine
Ševčík, Ondřej ; Prokop, Aleš (referee) ; Dundálek, Radim (advisor)
This thesis focuses on the design of new high pressure injection system application on diesel engine. The design came from company Zetor’s demands. For this application was chosen system Common Rail supplied by company Bosch. Assignment was separated into several tasks. Research of suitable components for low pressure section, design of waste system and high pressure injection tubes design including injector clamping. Due to injectors used in this system was necessary to redesign cover for valves and even new system to lead wires from outside of the engine to injectors. Injector is attached by screw connection, which is composed from screw and clamping jaw. These parts are subjected to an analytic calculations. Clamping jaw of injector is even subjected to a FEM analysis, which focuses on fatigue life. Finally, the drawings were documented.
|
|
| |
|
|
Application of Pressure Accumulator Injection System on Six-cylinder CI Engine
Pacovský, Tomáš ; Štěpánek, Karel (referee) ; Dundálek, Radim (advisor)
This master's thesis deals with application of modern injection system Common Rail on six-cylinder CI engine. One of aims of thesis is to get a large overview of pressure accumulator injection system and explore the development in this area. Among main aims of the thesis belong a new construction layout in Pro/Engineer, accomplishing of static and dynamic analyse of most important parts via the finite element method (FME) and necessary control calculations. Finally, the design documentation of new most essential designed parts will be made. During making the thesis necessary source materials obtained from Vývojový ústav traktorů a.s. of Zetor Group company was made use of.
|
|
|
Common Rail for Six-cylinder CI Engine
Božik, Michal ; Ramík, Pavel (referee) ; Dundálek, Radim (advisor)
This thesis deals with the installation of high-pressure common rail injection system for six-cylinder tractor diesel engine. In the first part of the thesis is dismantled issue injection systems and related aspects. The next part is the installation of a fuel injection system, which involves placing components common rail system, the implementation of necessary interventions in engine design and the design of new components. The final section effect control calculations and stress analysis of new injection system components.
|
|
|
Common Rail for Six-cylinder CI Engine
Božik, Michal ; Ramík, Pavel (referee) ; Dundálek, Radim (advisor)
This thesis deals with the installation of high-pressure common rail injection system for six-cylinder tractor diesel engine. In the first part of the thesis is dismantled issue injection systems and related aspects. The next part is the installation of a fuel injection system, which involves placing components common rail system, the implementation of necessary interventions in engine design and the design of new components. The final section effect control calculations and stress analysis of new injection system components.
|
|
|
Application of Pressure Accumulator Injection System on CI Engine
Šiška, Adam ; Štěpánek, Karel (referee) ; Dundálek, Radim (advisor)
This master’s thesis deals with building the most modern injection systém Common-Rail for four-cylinder tractor diesel engine. The following application is a conversion from a obsolete system with inline injection pumps. Because the costs for this conversion must be minimized, that it is effort of minimal intervention in engine design. First this master’s thesis focuses on the theory of injection systems of diesel engines and related things and then the thesis shows the design conversion supported analytical calculations and FEM analysis of newly designed components.
|
|
|
Common Rail System for 6-cylinder Tractor Engine
Černoch, Josef ; Ramík, Pavel (referee) ; Dundálek, Radim (advisor)
This thesis deals with the installation of modern high pressure injection common rail system to six-cylinder tractor engine. This system replaces injection system with in-line fuel injection pump. Common Rail system installation on an existing engine is designed with minimal design changes to the engine block and engine head. It is advantageous to minimize production costs of the transition to high-pressure injection system. The thesis contains the design and stress analysis of the new component for high-pressure injection system.
|
|
|
The High Pressure Fuel System for CI-engine
Strouhal, Pavel ; Prokop, Aleš (referee) ; Dundálek, Radim (advisor)
This diploma thesis is focused on examining the development of a diesel tractor engine with a newer injection system, concretely common-rail system. Mainly it is about the application of the high pressure fuel pump, fuel rail and injectors. With regard to the used components are appropriate adjustments made on the engine, and then checked using the available calculations. Brief mention is given to the theoretical summary of the contemporary state of applied injection system and its development trend. Selecting adjustments is primarily based on observed operating load. However, it is also striving to their simplest implementation. An integral part of this work is drawing documentation of newly designed components.
|
|
|
Injection System with Pressure Accumulator for Commercial Powertrain Units
Suchánek, David ; Prokop, Aleš (referee) ; Dundálek, Radim (advisor)
The present work deals with a common-rail fuel injection system for powertrain applications. As part of the solution of the thesis, a comprehensive analysis of the injection system has been carried out with an indication of the principle and function of the necessary components, including demonstrations on specific vehicles and an outline of future developments. The injection system can be divided into 3 parts: low pressure, high pressure and control. The low-pressure section describes the fuel filter and feed pump. Within the high-pressure part, the components which are the injector, the high-pressure pump and the fuel rail are given in context. The control section then presents the control unit, sensors and actuators necessary to control the pressure and quantity of fuel. In order to give a comprehensive overview of the common-rail fuel injection system, the common-rail system parameters were measured and evaluated on a specific power unit using diagnostic equipment. The measurements verified the maximum pressure declared by the vehicle manufacturer, while showing the fuel pressure waveform in the fuel rail in different engine operating modes. style.
|
guest ::
