|
|
Tool life of ADMX inserts for milling of the S-grade materials
Tejkl, Jakub ; Kouřil, Miroslav (referee) ; Píška, Miroslav (advisor)
This diploma thesis studies the machining of group S materials. In the theoretical part of this thesis these materials were divided into groups and subsequently analyzed. These materials were also analyzed in terms of their impaired machinability. In the practical part of this thesis experimental tests were conducted to determine tool life, tool wear and in the case of testing titanium alloy surface roughness too.
|
|
|
Problems in machining of titanium alloys
Drábek, Tomáš ; Slaný, Martin (referee) ; Sedlák, Josef (advisor)
The theoretical part of the thesis contains a brief overview of some experimental methods that are used in machining technologies. The experimental part at first elaborates on the analysis of two titanium alloys. The actual experiment, which consists of milling of the two aforementioned materials with the use of several tools and holders, is then described. It was conducted in collaboration with the company Frentech Aerospace s.r.o. When milling, forces were measured with piezoelectric dynamometer. Further, the analysis of acquired data that is followed with discussion about its main findings, is provided. The conclusion of the thesis deals with the found facts corresponding with the information obtained by analysis of materials. The main results arise out of the comparison of used combinations of tools and holders for milling of material Ti-Al6-V4, observation of impact of particular factors on measured force, or out of different values of measured forces when milling two given materials.
|
|
|
Influence of heat treatment on the microstructure of alloy TiAl6V4
Fišara, Šimon ; Němec, Karel (referee) ; Foret, Rudolf (advisor)
The main goal of this bachelor thesis is to summarize influence of heat treatment on microstructures and mechanical properties of titanium alloy Ti6Al4V. There are summarized basic facts about titanium and its alloys in the first section of theoretical part. The second section is focused on description of phase transformation, mechanical properties, microstructures and heat treatment of Ti6Al4V. There were made several types of heat treatment in the experimental part and after that there were made metallographic analysis and evaluation of microstructures.
|
|
| |
|
|
Productive Machining of Titanium Alloys - I.
Lengálová, Barbora ; Sliwková, Petra (referee) ; Píška, Miroslav (advisor)
This study consists of theoretical and practical part. Theoretical part of study resumes properties of titanium and it alloys and mentions application field and the way of production. Study includes review of machining strategies of titanium alloys. The materials for cutting tools and various types of tool wear are included. The experimental part of study consists of two partial experiments focused on the face milling by the ball – end milling cutter. First part is focused on facial milling of the inside part of spherical surface by the ball – end milling cutter and thus its surface roughness rating. The second part of experiment focuses on the milling of flat surface by the ball – end milling cutter and consequential analysis of cutting forces when the chip thickness is variable.
|
|
|
Fatigue properties of titanium alloys
Horník, Vít ; Němec, Karel (referee) ; Věchet, Stanislav (advisor)
This bachelor thesis is concerned with fatigue properties of titanium alloys. The introductory part deals with basic information about titanium, its production, distribution of titanium alloys and their heat-treating. Next part then describes basic process of fatigue loading with the focus on the high-cycle fatigue stress and its application on some titanium alloys. The final part of the thesis includes optical and fractograph pictures.
|
|
|
High cycle fatigue of Ti6Al4V titanium alloy
Bártková, Denisa ; Liškutín, Petr (referee) ; Věchet, Stanislav (advisor)
The main goal of this master's thesis is an analysis of high-cycle fatigue of titanium alloy Ti- 6Al- 4V. In the first section of a theoretical part of the thesis, there are summarized current facts about production, properties and aplications of titanium alloys. The second section pursues fatigue behaviour of material. An experimental part consists of metallographic analysis, evaluation of tension and bending tests and mainly analysis of high-cycle fatigue behavior for different assymetry ratios.
|
|
| |
|
|
ELECTRON BEAM WELDING OF HETEROGENEOUS WELDS OF Ti/Al ALLOYS
Havlík, Petr ; Dřímal, Daniel (referee) ; Schwarz,, Drahomír (referee) ; Foret, Rudolf (advisor)
The problematics of weldability of heterogeneous welds of aluminium and titanium alloys produced by electron beam welding is discussed in this work. Homogenous welds of selected alloys were analyzed in the first stage. Welding of these materials relates to formation of intermetallic phases at the interface of base materials due to differences in physical, chemical and metallurgical properties of base materials. One of the prerequisites for producing high quality weld joints is to find optimal process parameters. The influence of selected process parameters to integrity, structure and mechanical properties of heterogeneous Al/Ti joints is evaluated.
|
|
|
Mechanical properties of titanium alloys
Prudíková, Alena ; Liškutín, Petr (referee) ; Věchet, Stanislav (advisor)
This bachelor thesis was created in a form of literary search and it summarizes the basic information of Titanium and its alloys. The most significant features, such as its position in Periodic Table of the Elements, allotropic modifications and their crystal lattices, chemical or physical qualities, are mentioned in the first chapters. The attention was also paid to both the mechanical and the technological qualities of titanium as such, including the effect of impurities that may be very significant. General and summarized information about the history of titanium, as well as current directions in the development of its alloys are discussed in chapter 1.3. As a following, the information about production and the methods used during the production are discussed in chapter 2. Distinct part of the thesis depicts the partition of concrete titanium alloys and the heat treatment of them. The TiAl6V4 alloy was described in details, since it is the most widely used, therefore the most often produced titanium alloy.
|
guest ::
