|
A design of thermoforming device
Vozár, Vojtěch ; Pavlík, Jan (referee) ; Tůma, Jiří (advisor)
This bachelor's thesis deals with the design proposal of a machine for thermoforming using and vacuum. The research part of this thesis discusses the technology of thermoforming plastics, production process, and tools used in thermoforming. Research part also includes a description of the machines available on the market. Following chapters describe the requirements for the machine, selection of design variants based on the weighted values method, and detailed design of the machine. Final part of thesis provides an estimate of the machine's cost and an evaluation of the results of the work. Bachelor thesis includes a 3D model created in SOLIDWORKS 2023 and chosen technical drawings.
|
|
Design of manufacturing technology for plastic terminal device
Adamiec, Pavel ; Žák, Ladislav (referee) ; Kandus, Bohumil (advisor)
The master thesis deals with design to produce terminal using the plastic injection molding. In the first part are theoretical information about injection molding and injection molding with inserts. The second part is a concrete design of production terminal which contains: injection mold design, calculation of the injection parameters, machine selection, technical and economic evaluation of production. Terminal is made of polyamide 66, inserts material is brass. Parts of injection mold assembly are selected from Hasco standards. The main parts of assembly are made of 1.2312 steel. Production cycle is placed on injection machine Allrounder 375 V from Arburg.
|
|
Buckling Analysis of Thermoplastic Pipes
Procházka, Martin ; Kytýr, Jiří (referee) ; Gratza, Roman (advisor)
This thesis deals with buckling analysis of thermoplastic pipes. An experiment was conducted in which the pipes were encumbered in axis. During this experiment, the loading force was monitored and measured at the material stability loss. For these measurements, polyethylene, polypropylene and polyvinylchloride pipes were used. Afterwards, the static and buckling analysis of pipe models were made in the ANSYS programme. The models were created on the basis of the experiment results. The outcomes of the analysis were compared with figures of the theoretical calculations. In the ANSYS programme pipes were strained by external overpressure.
|
|
Production technology of the plastic top cover
Majerčíková, Erika ; Žák, Ladislav (referee) ; Kandus, Bohumil (advisor)
This thesis deals with the production technology of the plastic top cover by injection molding. Series production is set at 500 000 units, for which the required period of delivery is 9 months. A literary study is developed, focusing on the technology of injection molding in molds in the first part of the thesis. The second part is practical, which includes a design technology for the manufacturing of the plastic top cover, namely: the choice of material, determination of process parameters, the choice of the injection molding machine, and the injection mold design. The chosen material is a polyamide 6 with 30 % share of the glass. According to technological parameters of injection, the injection molding machine, Engel ES 200/65, was chosen. The injection mold is composed of standards parts of the company Meusburger and HASCO.
|
|
Laser welding of plastics
Nováková, Eliška ; Mrňa, Libor (referee) ; Kubíček, Jaroslav (advisor)
The bachelor presents a brief characteristics of thermoplastics welding methods followed by a more detailed description of laser welding of thermoplastics, i.e. laser description, division and types. Then, conditions and parameters of welding are defined. The experimental part is focused namely on visual welding tests on a test sample. The sample consists of two types of material – pure polymethyl methacrylate and black polycarbonate – which are used in car headlamp production. For welding, a diode laser designed for thermoplastics welding was used. The main target of inspection were flaws that were visible on macroscopically enlarged images. The tested welds mostly showed porosity and air bubbles. Finally, an evaluation of the experiment is conducted.
|
|
Analysis of Thermoplastic Welded Joints
Procházka, Martin ; Kytýr, Jiří (referee) ; Gratza, Roman (advisor)
This thesis deals with analyses of thermoplastic welded joints. Experiments were performed, in which the not-welded specimens and specimens with cruciform welded joints were tested by tensile and three-point bending test. For these measurements, polypropylene and polyethylene specimens were used. Afterwards, the analyses of specimen models were made in the ANSYS programme. The results of the analyses were compared with figures of the analytic calculations and measurements.
|
|
Injection moulding
Heralt, Aleš ; Balej, Zdeněk (referee) ; Žák, Ladislav (advisor)
This Bachelor´s thesis is focused on construction forms for injection of thermoplastic matters. The technology for plastic products production is technology that participate more and more in production of all sorts of products - from technical components over kitchenware after as much as toys. Main part of this thesis is focused on description of the injection valve, ejector, annealing and ventilation system forms for injection with the main structural principles.
|
| |
|
Filament recycler for FDM 3D printers
Neuwirth, Karel ; Bayer, Robert (referee) ; Jaššo, Kamil (advisor)
The first part of the project is focused on various types of 3D printing technology, especially FDM technology, where is possibility of recycling printed material. Next is a description of the most used materials for printing by FMD technology and a description of the production of filament using screw extruders. Several devices were selected for recycling and production of filament from FDM printing, for which their technological procedure in recycling is described. Subsequently, the work deals with the design of a device for melting plastic using a screw extruding device, including the possibility of measuring and regulating the output. In the last part, according to the design, the device is assembled and tested.
|
|
Production technology of mobile phone plastic cover
Heralt, Aleš ; Orel, Daniel (referee) ; Kandus, Bohumil (advisor)
The master´s thesis is focused on technology of injection plastics. The specified part is guard cover of mobile phone. The first part of thesis is focused on description of technology with priority on construction of form. The second part of thesis includes calculations of parameters, which are needed for production, along with techno-economic evaluation of selected construction design.
|