|
|
Design of low volume inlet tester
Hotový, Michal ; Huzlík, Rostislav (referee) ; Knoflíček, Radek (advisor)
The topic of this thesis is the design of a testing device for checking electrical car sockets according customers’ requirements. The electrical socket shall be tested by electrical, mechanical and camera tests. The diploma thesis is divided into two main parts, first is a part describing the basic elements in the construction of electric vehicles, and describing types of electric sockets in electric vehicles, and second, a practical part describing the design of a testing device.
|
|
|
Device For Automatic Testing Of Ultrasonic Gas Leak Detector
Skryja, Petr
In this paper a device for automatic testing of the gas leak detector is presented. The device allows testing product which is an embedded device that is improved during a development. This requires testing the product after each implementation of a new feature, as there may be situations where this implementation will stop some part of the product from being functional. For realization mini PC Beaglebone Black was used and software architecture of this device is introduced.The presented device is able to do automatic testing that is more accurate and faster than human testing.
|
|
|
Testing equipment for function test of automatic standby unit
Dušek, Pavel ; Pásek, Jan (referee) ; Štohl, Radek (advisor)
This bachelor’s thesis is focused on the description of automatic transfer switch and designing a tester for automatic transfer switch MODI ZA made by OEZ s.r.o. The solution itself consists of creating the state diagrams of the function test steps, programming software for Simatic S7-1S200 PLC and Simatic KTP 400 control panel and creating a technical documentation containing the tester wiring diagram, and layout of the insides of the switchboard. It also contains the diagram explaining how to connect the automatic transfer switch MODI ZA to the tester.
|
|
|
Design of test equipment for testing air-cooled steam condensers
Líška, Filip ; Chýlek, Radomír (referee) ; Kracík, Petr (advisor)
The work is focused on the design of a testing device for testing air-cooled condenser tubes. At the beginning of work are described basic types of industrial air condensers, possibilities of tube types and their materials. A radial fan that will supply cooling air to the wind tunnel is already purchased for the testing device. For minimum and maximum parameters, the basic geometry and state parameters are first proposed. Subsequently, the basic design was tested in the CFD. The result of the first model was not satisfying because the speed field has not been evenly changed to a straight tunnel. For these conditions, several variants have been tested in the second model, and the "blow" on the tubes inside the wind tunnel has been tested for the best variant.
|
|
|
Universal Tester of Radio Conditions for Narrowband IoT Communication Technology
Možný, Radek ; Štůsek, Martin (referee) ; Mašek, Pavel (advisor)
Technology Narrowband IoT is a representative LPWA (Low Power Wide Area) tech-nology that due to its promising features aims for demands of the Internet of Thingsapplications for autonomous data sending from sensors in areas of poor mobile coverage.For such applications, it is beneficial to firstly map properties of communication technol-ogy in areas of intended use and evaluate whether or not is this technology applicable.This Master thesis deals with the design of the hand-held measuring device for evaluationof Narrowband IoT properties. The output of this thesis is firstly comparison of LPWAtechnologies secondly, design of the mentioned device and verification of its functional-ity. And in last part description of measurement of transmission delay for delay-tolerantapplications. Transmission delay is a critical parameter for delay-tolerant applications.Such an application can be, for example, smart electrometers for which there is definedmaximal allowed transmission delay of 10 seconds and therefore it is desirable to evalu-ate whether or not is the deployment of the communication technology Narrowband IoTsuitable in the intended area for delay-tolerant or even for delay-intolerant applications.
|
|
|
Semi-solid alloys testing device
Valíček, Václav ; Bastl, Michal (referee) ; Chalupa, Jan (advisor)
This thesis deals with design of semi-sollid alloy testing device. In the beginning, there are briefly introduced possibilities of semi-solid alloy exporation followed by analysis of temperature measurement options, torque measurement options and control of the thermal system. There was build development version of construction and electronics based on results of analysis. The outcomes of this thesis are: design of printed circuit board based on electronics prototype connection, production of mechanical parts for device and realization of user interface in form of touch screen.
|
|
|
Proposal of test equipment/method for quick verification of quality of welded joints
Zejda, Václav ; Hála, Michal (referee) ; Kubíček, Jaroslav (advisor)
This bachelor’s thesis is dealing with the proposal and the choice of the proper method for quick check of weld seams of ball pivot of automobile stabilizers created by the resistance welding method. The first, theoretical part deals with the resistance welding. The second part deals with a description of the production process and testing of the particular component. The last part contains personal proposals and an assessment of the suitability of use of each construction solution of simple mechanical devices for quality checking of the weld seam. The recommended method to use is the Charpy impact test which served as the base for designing the special test device.
|
|
|
Proposal crosshead test equipment
Šilar, Tomáš ; Frýza, Josef (referee) ; Brandejs, Jan (advisor)
This thesis deals with structural design of testing device for moving parts of refrigerating devices, including functional design of drives, mechanical protection against overload and 3 design types of handles are included as well. First part describes appropriate selection of drive. Following part deals with calculations of spheroidal screw durability and calculations of mechanical protection. Final part consists of the design itself and technical drawings, according to which was the machine produced.
|
|
|
Design of experimental device for durability testing of bearings
Frejlich, Tomáš ; Dvořák, Antonín (referee) ; Svoboda, Petr (advisor)
Diploma thesis deals with the structural design and subsequent implementation of a functional prototype of an experimental device for durability testing of bearings. The first part of the thesis deals with an overview of the current state of knowledge and summarizes information about testing the durability of bearings. In the next part follows the design, selection and analysis of the optimal design variants. The last part deals with the verification of the functionality of the prototype bearing life testing and evaluation of data measured during testing.
|
|
|
EMC Test laboratory for low voltage circuit breaker
Vejtasa, Leoš ; Dřínovský, Jiří (referee) ; Dohnal, Petr (advisor)
Nowadays there are electronic systems almost in every new device. They are emitting and receiving electromagnetic interferences. The safety levels for circuit breakers are also increasing. Because of these issues the circuit breakers must work properly also in areas filled by electromagnetic interference. This thesis describes the issues of electromagnetic susceptibility of the circuit breakers.
|
guest ::
