|
|
Design of a compact system for measurement of the indoor environment
Jančík, Josef ; Klimeš, Lubomír (referee) ; Pech, Ondřej (advisor)
The diploma thesis deals with a design of a compact air quality measuring device. Theoretical part of the thesis introduces the reader with air quality measuring, measuring criteria and basic principles of measuring. Next part is dedicated to the design of the device – component selection, model creation and simulation of heat transfer between individual components. This parts also describes the connection between multiple devices and data collection. The following part presents practical testing of the device and the possibilities of its calibration. At the end of the thesis, the final device is evaluated in the terms of function and costliness.
|
|
|
Single-family house in Troskotovice
Slunečková, Eliška ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
This bachelor’s thesis aims to design a single-family passive house. Designed house is situated in Troskotovice on a flat building plot. The house is composed of two volumes: a bigger two-floor part with a gable roof and a smaller one-floor part with a mono-pitched green roof. The house is divided into a work zone in the north and east of the ground floor, a social zone in the south of the ground floor and a private zone placed on the first floor. The structural system of the building is a wood frame with timber truss and joist floors. A cast-in-place reinforced concrete slab is used for the foundation. The first part of the thesis includes architectural, structural, and material designs with assigned calculations such as acoustics, daylighting, energy certificate and fire safety calculations. The second part of my bachelor´s thesis consists of heat, ventilation, and plumbing designs with a focus on the ventilation design. An air/water heat pump is used for heating up domestic hot water and water for a wall heating system. The house is equipped with heat recovery ventilation system. Rainwater from roofs is collected in an accumulation retention tank and used for watering a garden and toilet. Excessive rainwater s infiltrated in an infiltration basin on the plot. Design of the house includes connection to the electrical grid, optical grid, water supply and sewage systems.
|
|
|
Office low-energy building of research center in Brno
Fireš, Michal ; Velísková, Eva (referee) ; Hirš, Jiří (advisor)
The aim of this master thesis is to design an office building for research institute in Brno. In the first part there is designed building structure. The building has two floors. First floor with four offices, toilets, storerooms, kitchen and utility room and second floor with two offices, toilets, conference room, kitchen and two roof terraces. The main entrance is oriented towards north. Load-bearing and non-load-bearing walls are designed from aerated concrete blocks, floor slabs are from cast-in-place reinforced concrete. The building façade is insulated with ETICS. In the second part there are designed systems of heating, mechanical ventilation, cooling, lighting and use of rainwater. Third, cooling analysis of research institute AdMaS in Brno is made. The designs are drawn in AutoCAD, thermal calculations in DEKsoft.
|
|
|
Social HUB in Havlíčkův Brod
Jiráček, David ; Müllerová, Eva (referee) ; Kalousek, Lubor (advisor)
The subject of the Master’s thesis is a design of a social center in Havlíčkův Brod. The building will be primarily used for social meetings, education, sports activities or relaxation. It is a two-story building, where both floors are covered with an extensive green walkable flat roof. On the first floor are a café, a multi hall, a chill zone, a workshop for children, dressing rooms, a workshop for adults and utility room. On the second floor are club-room, two classrooms and an office with a room and a walkable terrace. The vertical load-bearing structures are made of CLT panels with a combination of timber and steel columns and beams. The floor structure is made of wooden I-beams and CLT panels. The entire building will be heated by a ground-water heat pumpy. The air handling unit will primarily serve as ventilation. Rainwater will be collected in a storage tank and subsequently used to flush toilets and irrigate the adjacent public space. The photovoltaic system will partially cover the building’s electricity consumption. The third part of the thesis deals with facility management of the building. It contains description of the functioning of the building management and determination and use of important data from the digital model of the building for the facility management. Digital model was created in the Archicad program, where I entered specified data and than I presented then by using the tables.
|
|
|
School
Filla, Josef ; Sláma, Ludvík (referee) ; Mohelníková, Jitka (advisor)
The thesis aims to project documentation stage for the execution of the project. It is an object of school for first and second grade. Documentation is prepared on the basis provided architectural studies. The building is situated on the flat, gently sloping land. The work consists of drawing and text documentation, evaluation of thermal, structural and acoustic and lighting requirements for construction, fire safety design of the building. The work includes specialized project on HVAC - heating namely, draft power and boiler room layout and design of concrete structures specialized namely design and dimensioning of cross continuous reinforced slab.
|
|
|
Building Services in Low-energy Building
Fireš, Michal ; Tůmová, Eliška (referee) ; Hirš, Jiří (advisor)
The theme of my bachelor´s thesis is to analyse a building P4 of scientific and research center AdMaS (Advanced Materials, Structures and Technologies) in Brno and results compare with real values. The second part is heating proposal. Building P4 is composed of two side halls and stores, which are connected with central fourth-floor administrative building. The teoretical part is focud on nearly Zero Energy Building. The calculating part consists of heat loss calculating, heating elements design, hot water preparation and distribution of heating water. Heating elements are designed as panel and tubular. The part of project part is technical report, drawing documentation and the evaluation of present condition of building services.
|
|
|
Sport Center in Holešov
Lánský, Petr ; Blažek, Petr (referee) ; Fišarová, Zuzana (advisor)
This bachelor thesis “Family Residence with Two Flats“ is composed in a form of implementing project documentation and it contains all requisites according to the valid regulations. It is a complex of two connected buildings. The first part is the base for athletes and spectators. The second part consists of a sports hall with the playing surface and bleachers for spectators. The first part of the building has 3 floors. The sports hall is roofed using trusses made of laminated wood. Part of this work is the study of dispositions specialization focused on technical equipment of buildings and wooden structures and seminar papers presented in the form of drawings details.
|
|
|
Single-family house
Tóthová, Patrícia ; Jelínek, Petr (referee) ; Struhala, Karel (advisor)
The bachelor's thesis deals with a project documentation for a building permission of a newly-built single family passive house located in municipality Dolní Břežany in the Central Bohemian Region. The plot is accessible by local road and is slightly sloping. The thesis has two parts. The first part presents structural and architectural design and also building physics assessment. The second part presents the design of building services – ventilation, heating, mechanical, electrical, plumbing and rainwater management. The house has two above-ground stories. On the ground floor there is a utility room, storage space, toilet, home-office and kitchen which is open to the dining area and living room. On the first floor there are situated three bedrooms, master’s bedroom, bathroom, toilet and walk-in-wardrobes. The vertical load-bearing structure of the house is sand-lime block masonry. External walls are insulated with graphite polystyrene ETICS. The house is built on foundation strips. The floor structure consists of filigree slab with a concrete screed. The house has a flat green roof. The house has mechanical ventilation. It is heated by floor heating with an earth-water heat pump as the heat source. It also has photovoltaic panels providing electricity. The rainwater is collected from roofs and paved surface and is used for watering a garden. The excess rainwater is infiltrated on the property. The Energy Performance Certificate was calculated. The project documentation is developed using BIM methodology.
|
|
|
Single-family house in Troskotovice
Slunečková, Eliška ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
This bachelor’s thesis aims to design a single-family passive house. Designed house is situated in Troskotovice on a flat building plot. The house is composed of two volumes: a bigger two-floor part with a gable roof and a smaller one-floor part with a mono-pitched green roof. The house is divided into a work zone in the north and east of the ground floor, a social zone in the south of the ground floor and a private zone placed on the first floor. The structural system of the building is a wood frame with timber truss and joist floors. A cast-in-place reinforced concrete slab is used for the foundation. The first part of the thesis includes architectural, structural, and material designs with assigned calculations such as acoustics, daylighting, energy certificate and fire safety calculations. The second part of my bachelor´s thesis consists of heat, ventilation, and plumbing designs with a focus on the ventilation design. An air/water heat pump is used for heating up domestic hot water and water for a wall heating system. The house is equipped with heat recovery ventilation system. Rainwater from roofs is collected in an accumulation retention tank and used for watering a garden and toilet. Excessive rainwater s infiltrated in an infiltration basin on the plot. Design of the house includes connection to the electrical grid, optical grid, water supply and sewage systems.
|
|
|
Office low-energy building of research center in Brno
Fireš, Michal ; Velísková, Eva (referee) ; Hirš, Jiří (advisor)
The aim of this master thesis is to design an office building for research institute in Brno. In the first part there is designed building structure. The building has two floors. First floor with four offices, toilets, storerooms, kitchen and utility room and second floor with two offices, toilets, conference room, kitchen and two roof terraces. The main entrance is oriented towards north. Load-bearing and non-load-bearing walls are designed from aerated concrete blocks, floor slabs are from cast-in-place reinforced concrete. The building façade is insulated with ETICS. In the second part there are designed systems of heating, mechanical ventilation, cooling, lighting and use of rainwater. Third, cooling analysis of research institute AdMaS in Brno is made. The designs are drawn in AutoCAD, thermal calculations in DEKsoft.
|
guest ::
