|
|
The concrete structure of a high office building
Skuhravý, František ; Pulec, Vladimír (referee) ; Perla, Jan (advisor)
Aim of The Diploma Thesis was to design load-bearing structure of a multi-storey reinforced concrete building, to realize structural analysis in Dlubal-RFEM software and dimension its selected parts. Designed structure is based on already erected building in office edifices campus in Brno-Slatina district. Its original number of storeys was increased from ten to nineteen, so the specific problems connected to high-rise building designing could be solved. Time dependent deformations of vertical structures were analysed in detail, so the changes in load of horizontal elements could be described more precisely, because of its direct dependence on compression of the columns. Within the paper, foundation structure dimensions were designed, assessment and design of composite columns assembly were made, as well of floor slab in 2nd floor with column deformations impact check on the 17th floor. Also, the external walls, pillars and shear core walls were designed and assessed. Formwork drawing of designed structure parts and detailed drawing of reinforcement of assessed elements were elaborated. Based on Diploma Thesis results it can be stated, that if influence of nonuniform load of vertical structures within the high-rise building designing is neglected, consequent project would presumably be uneconomic, or dangerous after an optimization attempts.
|
|
|
Bridge on the I/44 road
Majer, David ; Pachl, Radek (referee) ; Panáček, Josef (advisor)
The subject of this thesis is the design and analysis of five-span bridge construction across the railway on the route Zábřeh - Šumperk and the Morava river. There will be made separated bridge for each direction, only right bridge is considered in the thesis. Object is located to 1st class road I/44 on the route between Mohelnice and Jeseník. Three variants were designed - two prestressed chamber girders, one prestressed chamber girder with prefabricated consoles and construction of concrete slab mixed with two steel girders. After these variants were weigh up and the first one, with the length of cantilevered construction 235,6 m and maximum lenght of span 60 m, was chosen for analysis. Calculation of load effects was made by software Scia Engineering 2013 and the analysis was made according to current standards by manual calculation depending on limit states and their influence on the design as well. Drawing documentation and visualization are also part of the thesis.
|
|
|
Static solution of reinforced concrete structure
Mašek, Petr ; Kostiha, Vojtěch (referee) ; Zlámal, Martin (advisor)
This diploma thesis deals with study of feasibility of waterpark monolithic reinforced concrete structure with roof terrace. This structure has one underground floor, which has water park utility function and two above ground floors. On the roof is terrace with grass, mobile bar and with space to relax. Subject of this diploma thesis is the main loadbearing frame, which has span 32 m. The structure is assessed according to limit states of valid norms and also takes into account construction stages and time dependent analysis. The structure is calculated on beam and slab-plate structural models. Structural analysis and general drawings are done.
|
|
|
Bridge over the Berounka river
Gratza, Jonáš ; Diviš, Dalibor (referee) ; Panáček, Josef (advisor)
Diploma thesis is focused on a design of the road bridge in Roztoky municipality. The bridge spans Berounka river. The design is processed in three options and the selected option was developed in greater detail. The layout of bridge is designed as a girder box with haunch. The bridge will be built by a cantilever erection method. Structural analysis of the bridge regards the influences of construction by TDA method. The structure is assessed for temporary and permanent states. The assessment of the structure was made according to EC.
|
|
|
Bridge over the I/55 road and railway line
Gross, Tomáš ; Pachl, Radek (referee) ; Panáček, Josef (advisor)
The main aim of the diploma thesis is a design of two bridges on D1 highway (Říkovice – Přerov). Structural system of these two bridges is a seven spans continuous beam. The bridges span the rail track and road I/35. The structural system of these two bridges is identical. The preliminary design is processed in two options. The first one considers the use of post-tensioned pre-casted beams PETRA with cast-in place cross beams and composite bridge deck. The second draft considers the use of two slab-beam with the cross beams. Effects of loads were calculated in SCIA Engineer program. The build-up phases were assessed by TDA method. The assessment of the structure was made according to EC.
|
|
|
Design of highway bridge
Luberová, Lucie ; Formánek, Ing Martin (referee) ; Zich, Miloš (advisor)
The subject of this bachelo r’s thesis is the design a new supporting bridge construction in Prešovský kraj, district Levoča the territory of Slovak Republic. This object is located on the highway D 26,5/120, at kilometer 13,499 795 and communication of third class – 131-00 bridges. The objective is the design of a perpendicular four-span construction, which is proposed in three variants. The first variant is a chamber girder with inclined walls from post-tensioned concrete height 2,480 m. The second variant is composed of two beamed cross-section and the third variant is composed of one beamed cross-section. For detailed assessment the first variant was chosen with a length of bridging of 166,000 m. The calculation of load effects is done by software Scia Engineer and compared with a manual calculation according to current standards. This bridge is designed according to limit states, construction´s influence on design is taking into consideration. Structural analysis, well arranged drawings and visualization are elaborated in this thesis too.
|
|
|
Prestressed bridge No. 202 on the expressway R2 in Slovakia
Janek, Tomáš ; Urban, Jiří (referee) ; Koláček, Jan (advisor)
My diploma thesis deals with design of the bridge number 202 on expressway in Slovakia. The bridge leads across the road number I50 (between Trenčín and Bánovce nad Bebravou) and railway number 130 (between Trenčín and Chynorany). For each course there is a separate super-structure. Only left super-structure is considered for the work. The box girder with four spans is chosen from three variations. This bridge is designed according to limit states, construction´s influence on design is taking into consideration. Structural model of construction is made as a spatial bar model. Structural analysis, well arranged drawings and visualization are elaborated in this thesis too.
|
|
|
Analysis of cantilever of commercial building
Gric, Pavel ; Šiška, Radek (referee) ; Strnad, Jiří (advisor)
This diploma thesis is about analysis of post-tensioned cantilever beam, which is part of cantilever of commercial building. The main part of thesis is evaluation of behavior of building structure in time and determination of the most suitable staging. Next part of thesis is design and evaluation of reinforced slab and beam.
|
|
|
Bridge over the Živný Brook
Sekanina, Josef ; Řehulka, Martin (referee) ; Panáček, Josef (advisor)
This thesis occupies with the design of the road bridge over the stream Živný, a railway lane and a projected road between Běleč village and Husinec village. There are designed three variants of bridges. The variant no. 1 – continuous box girded beam – was chosen for the detailed analysis. The pre-stressed concrete road bridge is designed and evaluated according to European standards – Euro codes. The sequential construction influence and its impact on the construction is also considered in the calculations. The drawing documentation and the visualization of the bridge are made.
|
|
|
Modelling the wireless transmission channel in OPNET Modeler simulation environment
Spiglazova, Světlana ; Koutný, Martin (referee) ; Hošek, Jiří (advisor)
This diploma thesis deals with modeling wireless transmission in simulation environment OPNET Modeler. In theoretical part, there is described the very substance of spreading the signal via electromagnetic wave including impact of the surroundings that affects the spreading. These impacts have an influence on described selected parameters of wireless transmission of the signal characterizing its quality. Furthermore, there is described the OPNET Modeler setting, which allows designing the wireless transmission and by means of simulation verifies its functionality and acquires it is parameters. The transmission of the signal from transmitter to receiver itself is divided to individual steps, which are described in detail considering the implementation in aforementioned environment. In practical part, there is configured the basic model of wireless network and also executed series of simulations with different variants of commonly adjustable basic parameters of the transmission, as signal modulation, antenna types and network topology. Additionally, attention is turned to the stages of transmission itself, philosophy of their cooperation based on sharing the information via data units called TDA and their implementation in source code of the C++ language called transmission models. Based on these foundations is beyond beforehand defined created new user TDA and by means of simulation verified its correct implementation within packet switching. Values of the selected including user TDA are written in the window of simulation console with the help of the C++ language. Acquired results of the simulations are analyzed and documented in the conclusion. Source codes are available in the diploma thesis appendix.
|
guest ::
