|
|
The load-bearing reinforced concrete structure
Čapek, Andrej ; Čairović, Dorde (referee) ; Girgle, František (advisor)
The bachelor's thesis is focused on the design of the load-bearing monolithic reinforced concrete structure of an apartment building according to the specified documents. The content of the work is the design of a locally supported ceiling slab above the 2 underground floor, for which 3 variants were calculated and compared. Furthermore, the work is devoted to the assessment of a prefabricated staircase. In addition to the text part, a static calculation and drawings of shapes and reinforcements of selected structures are processed.
|
|
|
Design of the load-bearing RC structure of the existing building
Hošková, Aneta ; Lyčka, Lukáš (referee) ; Girgle, František (advisor)
The bachelor thesis deals with the assessment and subsequent strengthening of the existing ceiling structure in a civil building, where numerous failures were detected by a structural-technical survey. The ceiling structure consists of both beamed ceilings and simply laid slabs. The beamed ceilings were reinforced with an overconcrete slab and shotcrete with additional reinforcement. The simply laid slabs were bonded together with the overaly slab. The work also includes the design of a new reinforced concrete monolithic staircase.
|
|
|
Reinforced concrete structure of residential building
Vilímek, Václav ; Girgle, František (referee) ; Požár, Michal (advisor)
The bachelor thesis deals with the design and assessment of the reinforced concrete ceiling structure of an apartment building. The design of the structure was carried out using SCIA Engineer using the finite element method and subsequently verified by manual calculation. The design of the structures was carried out according to the valid European standards ČSN EN 1992-1-1 and ČSN 73 1201. The result of the work is the design of the reinforced concrete floor slab and staircase. The scope of the work was made in a BIM-compatible design.
|
|
|
Structure of apartment building – selected elements
Kanichová, Barbora ; Švaříčková, Ivana (referee) ; Perla, Jan (advisor)
The aim of the bachelor thesis is selected construction elements of low-rise apartment building. Reinforced concrete slab of the upper floor is solved in this thesis. The requirement to limit the propagation of impact noise from the staircase to the building and thermal bridge interruption was taken into account in the design of the construction. The deformation of the ceiling structure was verified regarding the integrity of the deposited infill structures. RFEM 5.18 software is used to solve internal forces. All the calculation are performer according to ČSN EN 1992-1-1 and ČSN 73 1201.
|
|
|
Detached family house with design studio
Dufek, Tomáš ; Žižka, Lukáš (referee) ; Vajkay, František (advisor)
The project addresses the new family house with design studio. It also dealt a double garage and parking for design studio. The building is designed in steep terrain. The building is designed Porotherm (masonry+ insulation system, ceilings). Roofing, flat roof construction. Thermal transmittance conform to the recommended values according to.
|
|
|
Detached House
Michna, Martin ; Smolík, Jindřich (referee) ; Winklerová, Jitka (advisor)
This elaborated is on the theme of "Family House." They work out of the A, B, C, D.1.1 and D.1.3 and Annex no. 6 to Decree no. 499/2006 Coll., On Construction Documentation, as amended by Decree no. 62/2013 Coll. Family house is designed for 4-5 members. Building Plot is located in Uničov and a number 2126/59. It is a two-storey building with a partial basement. In the eastern part a garage, without a basement. The roof of the garage serves as a balcony. It is accessible from one of the rooms on the second floor. The building is covered with a wooden truss. This creates a pitched roof with a covering of corrugated iron. On the south side terrace is partly covered by a small roof hanging on steel rods. In 1PP is lightweight gym, bathroom, food store, inventory, laundry room and utility room where the boiler is located. V 1 NP is a study, kitchen with pantry, dining room and living room and wc. 2 NP serves as the resting part. There is a bathroom, bedroom, closet and three children's rooms. Perimeter, internal bearing and inner walls are made of Porotherm. Only the basement is part of shuttering. Ceiling construction is Miako and beams Pot.
|
|
|
Family house
Leupold, Karel ; Manová, Ludmila (referee) ; Maceková, Věra (advisor)
Bachelor´s thesis solve design of the Family house in city Telč. It is a two-storey house with a partial basement, the roof is pitched with a slope of 35°. The house is designed of brick POROTHERM. The building is set on a land slightly sloping. The object is designed by valid standard.
|
|
|
Static solution of the ceiling structure of apartment building
Habanec, Kamil ; Nečas, Radim (referee) ; Zich, Miloš (advisor)
The Bachelor thesis deals with the static solution of the ceiling construction of an integrated apartment building. The aim is to design, or change the sizes of the projected structures in the submitted project, to ensure the interruption of thermal bridges and protection against foot noise. Subsequently, their static solution, dimensioning and assessment to marginal states. The elements intended for the solution are ceiling structures above the second upper floor, beams, a connecting staircase and a column. The calculation of internal forces was performed in the student version of SCIA Engineer 20.0 with a comparison of values on an independent simplified model. The work also includes drawing documentation for the aforementioned elements. The calculation was carried out according to the applicable standards and principles.
|
|
|
Semi-detached Building in Dřevnice
Smolka, Miroslav ; Vlček, Karel (referee) ; Vlček, Milan (advisor)
The project deals with the construction of a multifunctional residential building with 5 apartments, shop offices and law. The building is located in the village of Želechovice Dřevnicí on flat terrain. The house is designed in a structural system Porotherm, covered gable roof 45 °. The building is designed in accordance with the master plan of the municipality of Želechovice Dřevnicí, its character builds on the surrounding buildings and at work are respected by all laws and regulations relating to the design of buildings. The drawing part was processed by computer in AutoCad. Part of the project documentation is part of the drawing, text and calculation. The project is assigned a technical assessment of thermal and fire protection of the building.
|
|
|
The Students themselves - Student Center Poříčí
Turčan, Andrej ; Poslušná, Iva (referee) ; Jura, Pavel (advisor)
In my bachelor thesis I design the new student center situated on the bank of the river Svratka in the city of Brno. Main concept is based on mutual communication and common activities of the students. The body of project becomes diagonal stair hall, which connects all social areas and creates different platforms for various student activities.
|
guest ::
