|
|
Ellipsometry of Thin Films
Novotný, Zbyněk ; Navrátil, Karel (referee) ; Nebojsa, Alois (advisor)
Diploma thesis deals with ageing process of thin films of Co and Cu on Si substrate, prepared by the IBAD method. The process of film ageing, which depends on time of exposition to the atmosphere at room conditions, was investigated with spectroscopic ellipsometry (VIS+UV) and atomic force microscopy. In case of thin Co films, approximately four days long incubation period was observed. During this time period, a change in the optical parameters of the film occurs without a measurable change of the film topography. Using non-contact atomic force microscopy, a growth of the transitional film in the island growth regime was observed. During the ageing of thin Cu films, two stages of growth of the transitional layer were observed - nucleation stage and growth stage. Both of these time periods of the transitional layer growth show direct logarithmic dependence. Using non-contact atomic force microscopy, the growth of the transitional film was observed. Using atomic force microscopy in non-contact regime, time dependent measurement was done and the process of forming of one monolayer of the transitional layer was documented. Within the diploma thesis, a series of experiments on ultra high vacuum system were performed in order to investigate phase transformation of thin Fe films (22 monolayers) on Cu(100) stabilized by CO absorption. The transformation from fcc phase to bcc phase was induced by Ar+ ion beam bombardment with the ion energy in the range (0.5-4) keV. The process of phase transformation was observed by surface magneto-optic Kerr effect, Auger electron spectroscopy and low energy electron diffraction.
|
|
|
Use of biomaterials for optoelectronic applications in semiconductor technology
Čuboň, Tomáš ; Salyk, Ota (referee) ; Zmeškal, Oldřich (advisor)
The bachelor´s thesis is aimed to measurement optical properties of thin layer films of biomaterials which could be used in optoelectronics and semiconductor technology. DNA and BSA were chosen in order to represent such extensive group of biomaterials. The theoretical part describes the way of preparation of thin layer. It also provides some information about basic phenomena and biomaterials. The practical part is focused on the description of preparation of thin layer film using spin-coating method. The chosen materials were studied by optical microscopy, UV-VIS spectrophotometry and spectroscopic ellipsometry. The thickness of prepared samples was measured by mechanic profilometry. In the last section of the bachelor´s thesis, there is discussion and evaluation of results.
|
|
|
Adhesion of a-SiOC:H films on planar substrates
Lepcio, Petr ; Salyk, Ota (referee) ; Čech, Vladimír (advisor)
This bachelor thesis deals with preparation of thin films of plasma polymers prepared by plasma-enhanced chemical vapor deposition. Tetravinylsilane was used as a monomer. Two sets of samples were prepared. Samples of the first set were prepared at different effective powers from pure tetravinylsilane and samples of the second set were prepared from deposition mixture of tetravinylsilane with different oxygen content at constant effective power. The film thickness was evaluated by spectroscopic ellipsometry and chemical structure by infrared spectroscopy. A scratch test was used to determine adhesion characterized by the critical normal load. An appearance of performed scratches was obtained by atomic force microscopy (AFM). Film adhesion influenced by the effective power and oxygen content in deposition mixture was discussed based on the received data.
|
|
|
Ordered and disordered arrays of colloidal nanoparticles for biomolecule detection
Ligmajer, Filip ; Rezek, Bohuslav (referee) ; Kolíbal, Miroslav (advisor)
This thesis deals with guided self-assembly of gold nanoparticles from their colloidal solutions onto silicon substrates and possible employment of nanoparticles for detection of biomolecules. It was found that by adjustment of solution pH and surface chemistry modification by means of electron beam irradiation it is possible to facilitate nanoparticle deposition to patterns with almost single particle precision. Spectroscopic ellipsometry was then employed in analysis of self-assembled layers of nanoparticles and its combination with a theory of effective medium approximation has proven the ability to assess nanoparticle dimensions and volume fractions. By experiments with thiolated oligonucleotides it has been shown that using ellipsometry one can detect even with very subtle changes in nanoparticle environment caused by biomolecules, thus promising its possible use in the field of biodetection.
|
|
|
Study of optical properties of thin films of organic photovoltaic cells
Čuboň, Tomáš ; Schmiedová, Veronika (referee) ; Zmeškal, Oldřich (advisor)
This master´s thesis is focused on measurement of optical properties of thin layer of materials used in organic solar cells (OSC). The usage of graphene oxides and its reduced forms as parts of hole transport layer (HLT) in OSC were studied. At the beginning of the thesis, there is described basic theory necessary to understand the optical properties of thin layers. The thin layer deposition and reduction of GO are discussed too. The experimental part is aimed to the optical characterization of prepared thin films. The results from optical microscopy, UV-VIS spectroscopy, FT-IR spectroscopy and spectroscopic ellipsometry were obtained. At the end of the thesis, the results are concluded and compared with already published literature.
|
|
|
Synthesis of low-crosslinked polymers by plasma polymerization
Kuchtová, Štěpánka ; Bránecký, Martin (referee) ; Čech, Vladimír (advisor)
This bachelor thesis deals with plasma enhanced chemical vapour deposition (PECVD), specifically plasma polymerisation, which has been used for the synthesis of low density crosslinked polymer thin films. Organosilicon thin films were deposited on a silicon substrate by radio frequency (RF) capacitively coupled plasma in a deposition chamber. Spectroscopic ellipsometry was used to determine the layer thickness and its optical properties. The chemical structure of the layers was investigated by Fourier transform infrared spectroscopy and the mechanical properties were investigated by nanoindentation. The effect of power and self-bias (USB) on the chemical structure, mechanical and optical properties of the as-prepared layers, which are related to the crosslinking density, was investigated in the context of achieving low crosslinking density of the material. Low crosslinked plasma polymers were synthesized at a self-bias level of 1 V, which corresponds to an approximate RF power of 0,1 W. This material can be characterized by a density of 1, 2 g·cm-3 an elastic modulus of 4 GPa, a hardness of 0,04 GPa and a refractive index of 1.53 at 633 nm (He-Ne laser wavelength). Infrared spectroscopy confirmed that this plasma polymer is composed of a carbon network with fewer embedded silicon atoms and, in particular, the highest concentration of vinyl groups compared to plasma polymers prepared at higher powers.
|
|
|
Study of Optical Properties and Interference Phenomena on Thin Films of Organic Mcaterials
Schmiedová, Veronika ; Čeppan, Michal (referee) ; Mistrík, Jan (referee) ; Zmeškal, Oldřich (advisor)
Ph.D. thesis is focused on the study and determination of layer thickness and optical properties, such as the dispersion dependence of the refractive index of various materials prepared in the form of thin layer. In the first part of this work the theoretical findings in the field of spectroscopic ellipsometry are summarised. These findings are followed by the description and characterization of the light polarization, evaluation of experimental data and determination of the physical properties of studied materials. Experimental and result section of this work is devoted to the preparation and characterization of thin films of the studied materials: titanum dioxide (TiO2), new organic materials (MDMO-PPV, PCDTBT, PCBTDPP, PC60BM, PC70BM) and reduced graphene oxide (rGO). These were all selected with respect to their potential use in the organic photovoltaics.
|
|
|
Functional organic-inorganic nanostructures
Kelíšek, Petr ; Zmeškal, Oldřich (referee) ; Čech, Vladimír (advisor)
Diploma thesis deals with preparation of multilayered organic-inorganic nanostructures via PECVD technology and analysis of optical properties of these layers by spectroscopic ellipsometry. The theoretical part handles the definition of thin layers, layered and gradient nanostructures, plasma enhanced chemical vapor deposition and principles of spectroscopic ellipsometry. In the experimental part, used materials and chemicals are described, afterwards follow a complete description of the apparatus used for sample preparation and a description of the sample preparation procedure. The results part consists of methodology of preparing material models necessary for ellipsometric measurements and evaluation of optical properties of deposited nanolayers.
|
|
|
Deposition of Indium Tin Oxide and study of its optical properties
Olivíková, Gabriela ; Kvapil, Michal (referee) ; Dvořák, Petr (advisor)
This work is focused on preparation and deposition of thin layers of indium tin oxide (ITO) by ion beam sputtering (IBS) and ion beam assisted deposition (IBAD). In the theoretical part, the electrical and optical properties, preparation methods, and applications are reviewed. In the experimental part, the optical and transport properties of deposited films are investigated by spectroscopic methods. It is shown that simultaneous bombardment of the surface with oxygen ions with energy 80 eV results in increase of transmittance in the visible range of spectrum. IBAD thus confirmed as a suitable method for modification of optical properties.
|
|
| |
guest ::
