|
|
MacPherson Suspension Kinematics Analysis
Trnková, Lucie ; Fojtášek, Jan (referee) ; Hejtmánek, Petr (advisor)
This bachelor thesis deals with the influence of the position of significant points of MacPherson strut on kinematic characteristics. The first part contains a description of selected suspension parameters, their impact on the driving properties of the car, and a description of MacPherson strut. Furthermore, based on provided data, is prepared a detailed analysis of the influence of kinematics points to individual characteristics. In conclusion, all findings are synoptically summarized so that they can serve as a manual for change of the kinematic characteristics.
|
|
|
Conversion of Car Front Suspension
Chaura, Václav ; Porteš, Petr (referee) ; Hejtmánek, Petr (advisor)
This diploma thesis is focused on the design of the conversion of the car front suspension for racing purpose. Existing suspension solution is described by analyse static and kinematic quantities. Furthermore, a change of suspension is proposed to improve the driving characteristics of the vehicle, where the kinematic, dynamic and strength analysis of the newly designed suspension is performed. The conclusion summarizes the comparison of the original and the new suspension design.
|
|
|
Design of formula SAE front axle
Honzík, Tomáš ; Blaťák, Ondřej (referee) ; Porteš, Petr (advisor)
My thesis will be aimed at front axle design. I am going to design the assembly of the front axle in the program ADAMS by MSC. I am going to observe and record most of cinematic changes of the car such as change of position of vehicle roll centre ,wheel camber, geometry adjustment , wheel toe-in measuring and other necessary data. The final report is going to include strength calculation of particular axle parts. I am also going to solve the axle stabilizer including strength calculation.
|
|
|
Race Car Measurement and Setup Devices
Andrys, Michal ; Blaťák, Ondřej (referee) ; Porteš, Petr (advisor)
This project deals with the systems and instruments used to measure and adjust the performance and effeciency of racing cars. The main goal of the work is to summarise the most widely used instruments for the basic and most important setup of the cars performance and the measurement of the most important components. It is concerned with tyres, wheels, engine and chassis.
|
|
|
Design of alignment and chassis setup equipment
Vajdák, Martin ; Bradávka, Marek (referee) ; Porteš, Petr (advisor)
Diplomová práce se zabývá návrhem zařízení pro měření parametrů podvozku závodního vozidla (sbíhavost/rozbíhavost, příklon/odklon, světlá výška vozu, rozložení hmotnosti), které následně slouží pro jeho seřízení. Úvodní teoretická část uvádí přehled nejdůležitějších parametrů podvozku, které mají podstatný vliv na chování a ovladatelnost vozu a které jsou tak nejčastěji předmětem zájmu. Následující kapitola shrnuje metody a zařízení, které se dnes pro měření parametrů podvozku využívají a uvádí jejich výhody a nevýhody. Předposlední kapitola teoretické části je věnována obecným doporučením pro měření parametrů podvozku vozidla a jeho seřizování. Poslední kapitola teoretické části uvádí požadavky na zařízení, jehož návrh je předmětem této práce. Úvod praktické části práce je věnován popisu konstrukce dvou navržených variant pro měření parametrů podvozku vozidla. Následující kapitola pak popisuje přípravu a průběh měření s využitím navržených souborů zařízení. Další kapitola je věnována výběru snímačů a zařízení pro měření. Závěr této kapitoly pak shrnuje přibližné celkové náklady na výrobu obou navržených variant. Poslední kapitolou je napěťová a deformační analýza navržené podpěry automobilu, která podepírá automobil namísto jeho kol. Závěr diplomové práce shrnuje dosažené cíle a zároveň uvádí návrhy a doporučení dalšího vývoje navržených zařízení.
|
|
|
Mechanical Design of Semi-Trailing Arm Suspension
Vondrák, Zdeněk ; Blaťák, Ondřej (referee) ; Hejtmánek, Petr (advisor)
This thesis is concerned with Semi-trailing arm suspension on racing car Škoda 130RS of group V. Kinematic analysis of suspension has been performed as well as stress analysis of single parts. On basis of these analysis, suspension design has been created. Design of suspension and fixtures are solved with regard to simplicity of manufacture, reduction of weight and reduction of maximal stresses. Adjustment of geometry of suspension (toe and camber) is realised by changing the position of fixtures on the body.
|
|
|
Effect of Suspension Kinematics on Vehicle Handling
Trnková, Lucie ; Blaťák, Ondřej (referee) ; Hejtmánek, Petr (advisor)
This diploma thesis deals with effect of suspension kinematics on vehicle handling. In the first part of the thesis, there are the basic parameters of suspension kinematics introduced. In order to perform the simulations, two multi-body vehicle models are created, one of which is derived from an off-road vehicle, for which there has been a significant change in suspension. For each model, there further is a description and comparison of the kinematic characteristics of different settings variants of their suspension introduced. The main part of the thesis deals with the analysis effect of individual suspension changes on vehicle handling during the selected driving maneuvers. The results of the simulations are qualitatively and quantitatively evaluated, and the resulting findings are in the conclusion summarized.
|
|
| |
|
|
Wheel Alignment for race cars
Vanda, Marek ; Hejtmánek, Petr (referee) ; Porteš, Petr (advisor)
This diploma thesis deals with the design of device for measuring wheel alignment and set- up of race car chassis. The real prototype of measuring device based on previous theoretical design has been made. The measuring procedure is mentioned as well. Another part is focused on factors affecting accuracy of measurement. The last part contains evaluation and discussion of gained results based on several measurements that have been done with prototype of measuring device.
|
|
|
Wheel Alignment Measuring Systems
Kliš, Kamil ; Blaťák, Ondřej (referee) ; Hejtmánek, Petr (advisor)
This bachelor thesis deals with issues of wheel alignment measuring systems. The prime chapter of this bachelor thesis specifies the basic parameters of the wheel suspension geometry. In the next chapter of wheel alignment measuring systems are described. In the final chapter I was dealing with development of the measuring devices and modern trends.
|
guest ::
