|
| |
|
|
Intanke and exhaust manifold for racing engine
Chuchma, Ondřej ; Zháňal, Lubor (referee) ; Beran, Martin (advisor)
This Master’s thesis is focused on design and optimalization of intake and exhaust system of the C20XE engine. It is four-cylinder gasoline engine with stroke volume of two litres, which was produced by car company Opel. This engine is determined for Opel Astra F automobile, that is build for racing. For optimalization of dimension parameters there is used a Lotus Engine simulation software, which simulates one-dimension gas flowing in manifold. 3D CAD models are made in Pro ENGINNER software.
|
|
|
BMW Exhaust Manifold
Ševčík, Miroslav ; Beran, Martin (referee) ; Svída, David (advisor)
This master´s thesis describes design and optimalization of the exhaust mainfold and an effective muffler for BMW 320i E30 car. This car is equipped with 6 cylinder engine M20B20. The construction is carried out with regard to the rules laid down by FAS Czech Republic. I used theoretical knowledge and Lotus Engine Simulation software in this thesis.
|
|
| |
|
|
Exhaust Manifold for Formula Dragon 3
Brezanský, Vít ; Janoušek, Michal (referee) ; Svída, David (advisor)
Main goal of this thesis is to design exhaust manifold for Formula Student car Dragon 3. Construction parameters follow requirements on high engine power and also have to meet some restrictions given by competition rules. Lotus Engine Simulation software was used for modelling the engine (originally from Husaberg FE 570 motorcycle) and for determination of influence of the exhaust parameters on power characteristics. This thesis is also dedicated to noise emitted by the exhaust system which is important due to Formula Student rules.
|
|
|
Optimalization of Intake Manifold for SI Engine
Vávrovec, Jiří ; Beran, Martin (referee) ; Svída, David (advisor)
This thesis focus with construction design intake manifold of four stroke engine rallyecross division 1A. For improvement observant come into operating here derive benefit from theory tuned supercharging, which is based on tuning longitudes sucking conduit. Derive benefit woolen effect. Driving unit is here used four cylinders, water-cooled, atmospheric combustion engine from car VW Polo 6N GTI. Design is created so, to answer condition division 1A.
|
|
|
Single Cylinder SI Engine for Formula Student
Adámek, Ladislav ; Vančura, Jan (referee) ; Svída, David (advisor)
Diplomová práce je zaměřena na konstrukční návrh sacího potrubí pro vůz Formula Student. Pro pohon vozu je použit jednoválcový atmosférický benzinový motor Husaberg FE 570. Sací potrubí je navrhováno tak, aby bylo v souladu s pravidly Formula Student. Pro zvýšení plnící účinnosti sací potrubí využívá resonančního efektu. Délky sacího potrubí byly spočítány v software Lotus Engine simulation.
|
|
|
Engine Intake Manifold for Formule SAE
Řehák, Ivo ; Blaťák, Ondřej (referee) ; Svída, David (advisor)
Thesis is bend on design of intake manifold for car Formula SAE. For driving of this car is used engine Yamaha YZF R6 (2005). Design of intake tract is processed so that agrees with rules and specifications for cars Formula SAE. For restriction of engine performance is in intake tract installed restrictor. For filling efficiency uplift of engine is used the resonance effect in intake pipes. Analysis of flow is carry out on simulation software for analyses of one dimensional flow.
|
|
|
BMW Exhaust Manifold
Ševčík, Miroslav ; Beran, Martin (referee) ; Svída, David (advisor)
This master´s thesis describes design and optimalization of the exhaust mainfold and an effective muffler for BMW 320i E30 car. This car is equipped with 6 cylinder engine M20B20. The construction is carried out with regard to the rules laid down by FAS Czech Republic. I used theoretical knowledge and Lotus Engine Simulation software in this thesis.
|
|
|
BMW Exhaust Manifold
Ševčík, Miroslav ; Beran, Martin (referee) ; Svída, David (advisor)
This master´s thesis describes design and optimalization of the exhaust mainfold and an effective muffler for BMW 320i E30 car. This car is equipped with 6 cylinder engine M20B20. The construction is carried out with regard to the rules laid down by FAS Czech Republic. I used theoretical knowledge and Lotus Engine Simulation software in this thesis.
|
guest ::
