|
|
Driver of high brightness white LED
Tomášek, Petr ; Kubíček, Michal (referee) ; Frýza, Tomáš (advisor)
This document is analysing LED driving with switch power supply from classic electric network 230V/50Hz. First chapter analysis LED diodes function and its fundamental parameters . In the second chapter, there is essential information about electric power supply. Third chapter is analysing switch power supply, including simple techniques, which are not used nowadays. In the fourth chapter, there is analysis of LED driver and circuit design. Fifth chapter is analysing construction of driver and its safety. There i salso information about measuring of parameters of constructed driver.
|
|
|
Utilization of light emitting diode lighting
Podola, David ; Černý, Michal (referee) ; Paloušek, David (advisor)
This bachelor thesis deals with problems of illumination by LED diodes. Basic concepts of lighting technology are defined in the first part. The second part is dealing with the construction of body LED diodes and explains the principle of white light formation to LED. Introduces problems of cooling. Gives an overview of the available power sources for LEDs. Provides an overview of how to control lighting by using motion sensors and presence sensors. Will be made basic economic balance sheet, which will evaluate the advantages of using LED sources. Attachments provide the LED catalogs of manufacturers, accessories for LED and comment on other sources of information.
|
|
|
Switching LED drivers
Doležal, Miroslav ; Pavlík, Michal (referee) ; Šteffan, Pavel (advisor)
In this bachelor’s these are three basic typologies of drivers (step down, step up, step up and down output voltage) described. Five specific integrated circuits fulfilling the requirement for supplying LED diodes are selected. The output of this thesis is the design and construction of LED driver for supplying high brightness LEDs with 900 mA constant current.
|
|
|
Draft sources 1000A AC current sensors for calibration
Klimeš, Jan ; Vetiška, Vojtěch (referee) ; Dohnal, Petr (advisor)
This bachelor thesis deals with design and construction of device for precise measurement of 1000 A alternate current. This thesis theoretically discusses the possibilities of conventional solutions, such as current transformers, as well as modern methods in the form of current sensors. The output of this thesis is a solution of problems with accuracy and discussion of other possible ways to reduce systematic error. The thesis discusses structure of the current transformer, the digitalizing of the signal and its usage as an input for engineering units. The device is then tested for final accuracy.
|
|
|
Static and dynamic properties of current sources
Čech, Vojtěch ; Boušek, Jaroslav (referee) ; Horák, Michal (advisor)
The goal of this thesis is to describe the main attributes of current sources and their use as current mirrors. It is focused on the most common variations, and is specially targeted the principles and features of the Wilson-current-mirror, which is composed of bipolar and unipolar transistors. The goal is to compare them, on the basis of the analysis.
|
|
|
LED Driver evaluation kit for Automotive Front-Lighting
Večeřa, Jindřich ; Kubíček, Michal (referee) ; Dřínovský, Jiří (advisor)
This thesis deals with design of evaluation platform for integrated circuit NCV78934, which is designed to control LED headlights in automotive industry. The theory concerning the current regulation of buck converter, schematic design, PCB design and software design are also included in the thesis. Finally the measured data and testing procedures of the designed evaluation platform are discussed.
|
|
| |
|
|
Control of power LEDs
Jaroš, Tomáš ; Florián, Tomáš (referee) ; Kopečný, Lukáš (advisor)
The work deals with controlof high power LED modules. The introductory part shows theory of LED diodes. Next part is dealing with source supplies, their kinds and attributes. Then we deal with possibilities of current limiting. Next chapter shows switching power supplies. Aim of this work is to design wiring for power control LEDs and the resulting implementation by designing a suitable controller.
|
|
|
Controlled power generator of current impulses
Gabriel, Viktor ; Vrba, Kamil (referee) ; Rampl, Ivan (advisor)
The goal of this thesis is to design and realise microprocessor-controlled generator of current impulses, which are being brought in induction load. Thesis contains description of individual functional generator parts, mainly microprocessor program equipment. The text also aims for inductor design as an induction load and other solutions of power parts with the selection of the most suitable one. The generator of current impulses itself is realised on two-sided printed circuit board.
|
|
|
Two-quadrant switching current source for inductive loads
Húsek, Jan ; Chmelař, Milan (referee) ; Hanák, Pavel (advisor)
This master`s thesis deals with design and realization of two-quadrant switching current source for inductive loads. Output current adjustable range is 0 – 1A. Selected topology enables change of current direction. Current supply is made with TDA8920 integrated circuit. Thesis also contains basic information about switching supplies and coils.
|
guest ::
