|
|
Lifting roller table
Korytář, Jan ; Malášek, Jiří (referee) ; Kašpárek, Jaroslav (advisor)
This thesis deals with the current lifting devices and conceptual design of the lifting roller table, which serves as a knot on the transport line. The table is used to transport 1000 kg EUR pallets, with a 200 mm height change required. The thesis contains a brief analysis of the lifting structures, the design of the roller track, the design and strength calculations of the scissor mechanism. It also includes assembly drawings, frame subassemblies, and workshop drawings.
|
|
|
Gantry crane
Kriegler, Boleslav ; Škopán, Miroslav (referee) ; Pokorný, Přemysl (advisor)
The work is focusing on design and actual construction of gantry crane, which is constructed for manipulation with ships in ports. The work describes calculation of powers that are put on the crane or describes control of its parts. As an output of the work is considered drawing documentation.
|
|
|
Workshop hydraulic press
Simandl, Tomáš ; Štěpánek, Vojtěch (referee) ; Omes, Jiří (advisor)
This work deals with design of workshop hydraulic press, which is used for basic forming and assembling. In this work will be shown basic principes and dimensions of hydraulic presses, It will show categories of hydraulic presses based on technology of use. We will design hydraulic press adjustment, hydraulic parts and frame of the hydraulic press.
|
|
|
Assembly Design of Ball-Joint Test Bench Hydraulic Unit
Novák, Jiří ; Beran, Martin (referee) ; Ramík, Pavel (advisor)
The main object of this thesis is the proposal of fitting (setting) hydraulic cylinder into test equipment of ball-joints of company TRW-DAS Dačice a.s. The thesis includes a short review about testing ball-joint of above company and about liquid mechanisms. Also, there are analyzed demands for fitting (setting) hydraulic cylinder into testing equipment. In the main part of this thesis there is described my own constructive proposal with numeric calculations in proper software. In enclosure there are all analytical calculations with productive drawings and an assembly drawing.
|
|
|
Pillar jib crane
Flídr, Lukáš ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
This bachelor thesis deals with the structural design of the column crane, including important strength calculations. This thesis also includes a selection of a suitable hoist and drawing documentation in the form of a crane assembly and a pole drawing.
|
|
|
Tesla Bladeless Turbine
Lokaj, Jakub ; Kracík, Petr (referee) ; Fiedler, Jan (advisor)
The diploma thesis describes design of bladeless machine known as a Tesla turbine. The work is divided into theoretical part, practical part involving the design and experimental measurements of made bladeless turbine and a final assessment of thesis. The theoretical part deals with the basic design features of bladeless machines and their design modifications and flow in the nozzles. Furthermore there is a dedicated part of the dynamics of working fluid in the rotor of bladeless turbine represented by CFD modeling. The practical part includes the design and construction of parts of the turbine on a preliminary calculation using an analytical model of the flow in the turbine. The designed turbine components were checked for operational safety with structural calculations of shaft and disk impeller. The thesis was also performed experimental measuring of parameters of designed bladeless turbine. Measured values were compared with the analytical model which predicted turbine efficiency. In conclusion, besides to assessment, thesis also outlines possible proposals for further improvements of constructed bladeless turbine.
|
|
|
Hydraulic press for stamping of rotor packets
Hrnčiřík, Adam ; Dokoupil, Vladimír (referee) ; Omes, Jiří (advisor)
This bachelor thesis is focused on design of the hydraulic press for pressing assembly unit of the rotor and the shaft for electric motor. The content of this thesis are elastic and deformation calculations of frame and calculation of hydraulics components. Technical documentation of this hydraulic press were created based on previous calculations.
|
|
|
Structural design of the SOU Orbiter rack stacker
Těšický, Petr ; Molinari, Petr (referee) ; Škopán, Miroslav (advisor)
This thesis deals with rack stackers transporting pallets in rack channels. The goal is to make a competitive construction design of the given rack stacker. The thesis describes the principle of stacker function and the technical parameters of similar rack stackers. Subsequently, the structural design of the rack stacker, force analysis, kinematic analysis of the lifting mechanism and strength control of selected structural nodes are carried out. The drawing documentation is also a part of this diploma thesis.
|
|
|
Workshop hydraulic press
Simandl, Tomáš ; Štěpánek, Vojtěch (referee) ; Omes, Jiří (advisor)
This work deals with design of workshop hydraulic press, which is used for basic forming and assembling. In this work will be shown basic principes and dimensions of hydraulic presses, It will show categories of hydraulic presses based on technology of use. We will design hydraulic press adjustment, hydraulic parts and frame of the hydraulic press.
|
|
|
Lifting roller table
Korytář, Jan ; Malášek, Jiří (referee) ; Kašpárek, Jaroslav (advisor)
This thesis deals with the current lifting devices and conceptual design of the lifting roller table, which serves as a knot on the transport line. The table is used to transport 1000 kg EUR pallets, with a 200 mm height change required. The thesis contains a brief analysis of the lifting structures, the design of the roller track, the design and strength calculations of the scissor mechanism. It also includes assembly drawings, frame subassemblies, and workshop drawings.
|
guest ::
