|
|
Design methodology for the selection of basic components of linear machine tool axes
Král, Stanislav ; Dosedla, Michal (referee) ; Holub, Michal (advisor)
The aim of the thesis is based on specified parameters positioning units, which include stroke (1m, 2m, 4m), load (5kg, 50kg, 500kg), you place the position accuracy (0.04 mm) and dynamic (maximum attainable speed 1.5 m / s), proposals to build a ball screw, linear motor, a toothed belt and toothed comb. For selected variants of positioning units to design a 3D model of positioning units. The proposed variations to compare and define their advantages / disadvantages, techno-economic comparison, the limit values of individual designs, etc. The work includes a search drive in positioning units, design units with toothed belt, a toothed comb, ball screw linear actuator, a calculated message of individual proposals then 3D design options for the ball screw and linear motor including drawings and assembly drawings.
|
|
|
Animation of 2D gear meshing
Fiala, Vlastimil ; Klapka, Milan (referee) ; Hartl, Martin (advisor)
The bachelor thesis deals with the animation of planar involute gearing. The thesis gives a theoretical basis for understanding the problems of gears. Introduction of the work is focused on the description of the geometry and mesh of uncorrected planar gears focusing on the line of action. Gradually meshing of gear pairs with external, internal and rack gearing is described. Following part describes mesh of planar wheel with manufacturing rack, thus creating teeth flanks by rolling. The next section describes the problems of interference with the root curve and its impact on the gear's teeth number. The last part deals with correction of teeth by shifting profile and its effect on meshing ratios.
|
|
|
The drive of the feed coordinate portal machining center through pinion and rack
Malásek, Petr ; Novotný, Lubomír (referee) ; Marek, Jiří (advisor)
This thesis is dealing with determining of technical and economical limits of axis X of portal milling machine driven by gear rack and pinion. And designing drive of axis like this. In chapter overview of the current state of knowledge are researched options of drive systems of linear axis, primarily of using ball screw and couple of pinion and gear rack. Basic parameters of axis X portal milling machines, options of measuring, guiding of axis and electric motors. Then the limit suitability of using pinion and gear rack is determined. In next chapters is designed few variations of arrangements of drives and selected the best one. This arrangement is then designed.
|
|
|
Design of bench type drilling machine
Malásek, Petr ; Marek, Tomáš (referee) ; Blecha, Petr (advisor)
The subject of this thesis is description of bench drill, research about companies producing bench drills and analysis of their products. Based on research, parameters of drill are chosen, 3D model is designed and basic calculations are calculated. The output of this thesis is 3D model of bench drill and drawing of assembly.
|
|
|
System design vertical drive elevator, including the possibility of control for the storage system LLH
Tichý, Jiří ; Dlesk, Daniel (referee) ; Škopán, Miroslav (advisor)
The aim of this master's thesis are the engineering design of solutions for vertical elevator drive storage systém LLH – Schwerlast. The project is composed of technical report ans drawing documentation. The Technical report deals with storage and handling bar material, methods of control and manipulation of storage systems and structural design. In the structural part are designed draft drive and its main parts. The main parts of drive are checked using structural analysis. The drawing documentation is composed of assembly drawing, manufacturing dravings and welded frame drawing.
|
|
|
Design of machines for laser and plasma cutting
Fryčová, Martina ; Pavlík, Jan (referee) ; Holub, Michal (advisor)
The aim of the thesis is the design machines for laser cutting and plasma workspace 2.0 x1, 8 meters. The work described technology laser cutting and plasma and the resulting demands on the machine. Longer work includes a search of design solutions, then the actual design, including the necessary calculations and drawings.
|
|
|
The drive of the feed coordinate portal machining center using a rack and pinion
Bartoš, Michal ; Knoflíček, Radek (referee) ; Marek, Jiří (advisor)
This diploma thesis deals with the design the drive of the feed coordinate portal machining center using a gear rack and pinion. The thesis contains researches from the area of CNC machining centers for non-rotating parts and sliding linear systems. Market analysis of portal machining centers of type of lower gantry with a gear rack and pinion was done. Furthermore, several design variants are proposed in terms of positioning the drive on the machine. These variants were further compared and the best option was selected for the specified machine. Subsequently, the technical calculation of the drive is performed and individual parameters and structural elements are proposed. The thesis also includes a 3D model of the proposed variant and the required drawing documentation.
|
|
|
The drive of the feed coordinate portal machining center using a rack and pinion
Bartoš, Michal ; Knoflíček, Radek (referee) ; Marek, Jiří (advisor)
This diploma thesis deals with the design the drive of the feed coordinate portal machining center using a gear rack and pinion. The thesis contains researches from the area of CNC machining centers for non-rotating parts and sliding linear systems. Market analysis of portal machining centers of type of lower gantry with a gear rack and pinion was done. Furthermore, several design variants are proposed in terms of positioning the drive on the machine. These variants were further compared and the best option was selected for the specified machine. Subsequently, the technical calculation of the drive is performed and individual parameters and structural elements are proposed. The thesis also includes a 3D model of the proposed variant and the required drawing documentation.
|
|
|
The drive of the feed coordinate portal machining center through pinion and rack
Malásek, Petr ; Novotný, Lubomír (referee) ; Marek, Jiří (advisor)
This thesis is dealing with determining of technical and economical limits of axis X of portal milling machine driven by gear rack and pinion. And designing drive of axis like this. In chapter overview of the current state of knowledge are researched options of drive systems of linear axis, primarily of using ball screw and couple of pinion and gear rack. Basic parameters of axis X portal milling machines, options of measuring, guiding of axis and electric motors. Then the limit suitability of using pinion and gear rack is determined. In next chapters is designed few variations of arrangements of drives and selected the best one. This arrangement is then designed.
|
|
|
System design vertical drive elevator, including the possibility of control for the storage system LLH
Tichý, Jiří ; Dlesk, Daniel (referee) ; Škopán, Miroslav (advisor)
The aim of this master's thesis are the engineering design of solutions for vertical elevator drive storage systém LLH – Schwerlast. The project is composed of technical report ans drawing documentation. The Technical report deals with storage and handling bar material, methods of control and manipulation of storage systems and structural design. In the structural part are designed draft drive and its main parts. The main parts of drive are checked using structural analysis. The drawing documentation is composed of assembly drawing, manufacturing dravings and welded frame drawing.
|
guest ::
