|
|
Design of a heat source for heating a family house
Stoklásek, Martin ; Linda, Jakub (referee) ; Kracík, Petr (advisor)
The bachelor thesis deals with the design of an optimal heat source for heating a family house. The first part introduces common technologies for heating and hot water. In the second part, a specific family house is analysed, including the calculation of heat losses and annual heat demand. In addition, calculations are made for the insulated variant of this house and for the variant with a higher number of inhabitants. The third part focuses on the specific design of new heat sources for each variant of the house, including calculations of operating costs, acquisition and return on investment. The final part of the paper compares the proposed heat sources. The results show that the ideal heat source for the designed house is a gas condensing boiler. It is also confirmed that the insulation of the house is economically advantageous.
|
|
|
Detached house in Horní Stakory
Hornychová, Anna ; Melcr, Petr (referee) ; Fišarová, Zuzana (advisor)
The aim of this bachelor thesis is to design a nearly zero-energy detached house. It is located in Horní Stakory near Mladá Boleslav. The project is divided into two parts. The first part is the documentation for the construction of the building. The second part focuses on the internal environment of the house especially the heating system. It is a two-storey L-shaped building with an attached garage with a flat roof. The main part of the building has a gable roof. The first floor of the building is designed as a living area – living room, study or guest room, bathroom, utility room. The second floor is designed as private – bedrooms, bathroom and WC. The building is based on concrete foundation strips. The vertical structures are masonry made of sand-lime bricks. The building is insulated with the ETICS. Horizontal load-bearing structures are made of reinforced concrete. Heat losses through ventilation are eliminated using a mechanical ventilation unit with heat recovery. The heat pump will heat the supplied air and provide water heating for the underfloor heating. The main building will be heated by underfloor heating supplemented by electric towel heaters and occasionally by an electric heater in a non-heated garage. Solar panels will heat the hot domestic water. Electrical energy will be supplied from photovoltaic panels located above the garage and from the grid. Rainwater will be accumulated in a storage tank and used further for watering. The excess rainwater will be soaked up.
|
|
|
Heating of flat house
Slíva, Lukáš ; Vendlová, Lucie (referee) ; Topič, Jan (advisor)
The goal of this bachelor thesis is the design of heating systém and water heating for apartment house in township Jablůnka. In the theoretical part, I deal with the types of heating systems and radiators. In the computational part, I have designed the heat source, hot water heater, and the entire heating system. The conclusion of the thesis is a project, that contains a technical report and drawing documentation including attachments.
|
|
|
The effective coverage of the heat demand using solar system
Vítek, Lukáš ; Horká, Lucie (referee) ; Vyhlídalová, Karolína (advisor)
This master thesis aims to design the heating system and HDW preparation in an apartment building. The first variant deals with condensation gas boiler as the only energy source, while the second variant combines the gas boilers with the solar thermal system. The apartment building is located in Prag and has three above-ground floors and a basement. In the basement is the technical room. Convectors are being used for heat distribution. The theoretical part deals with the introduction to the solar thermal system.
|
|
|
Heating of flat house
Burýšková, Jana ; Počinková, Marcela (referee) ; Topič, Jan (advisor)
The goal of this bachelor thesis is the design of heating systém for apartment house in Brno. The heating system is two-pipe closed with forced circulation. Areas of the heating surfaces are panel radiators and tubular. The heat source for the solved object are two gas condensing boilers in the technical room. Mixed hot water heating will be solved in an indirect heating heater. In the theoretical part the thesis deals with the types of heating systems and radiators.
|
|
|
Design of a solar system for hot water heating in a family house
Reiskup, Matěj ; Tuhovčák, Ján (referee) ; Jaroš, Michal (advisor)
The thesis discusses the use of solar-powered water heating system in a family home. The introductory chapters present traditional methods of heating water and solar energy concepts. Following chapters compare the advantages and disadvantages of solar-powered water heating with more traditional heating methods and the core parts of such system. Finally a solar-powered heating system for a family home is proposed, including cost calculation, return on investment and comparison with a common heating system.
|
|
|
Design of heating system of apartment building
Lacko, Martin ; Vyhlídalová, Karolína (referee) ; Horká, Lucie (advisor)
This bachelor thesis is focused and designed on the heating of an apartment building. The theoretical part describes heat pumps, their properties and types. The calculation part is focused on the specific design of the heating system. The designed heat source is an air/water heat pump. The heating of the building is solved using board and pipe bodies. Specifically and in detail, the technical solution and implementation requirements are described in the technical report.
|
|
|
Heating building a hotel-type
Duda, Jiří ; Počinková,, Marcela (referee) ; Horák, Petr (advisor)
Design of heating of hotel type. The first part describes the analysis of the building and heating heat pumps theory and evaluation systems with heat pump. In the second part we find two variants of technical solutions. The third part contains solutions for selected variant and it is heating with gas boiler.
|
|
|
Plumbing Systems of the Multifunctional Building
Vaňková, Klára ; Wierzbická, Helena (referee) ; Vendlová, Lucie (advisor)
The plumbing systems of the multifunctional building are solved in this bachelor‘s thesis. Dimension and pipe materials of the sewage system and water supply are designed in the building. The central water heating is solved by hot-water tank in the technical room. The water heating of kitchen sinks is solved by flow-heaters. The property connections are designed as well. Roof rain water is lead by rainwater downpipes on building facade. Car park rain water is lead by spill control oil – water separator. Roof rain water and car pak rain water are lead to the rainwater storage tank with regulated drain. The desing of the plumbing systems is made with usege of the appropriate technical standards.
|
|
|
Heat pump for resident heating
Abrahám, Jan ; Kudela, Libor (referee) ; Pospíšil, Jiří (advisor)
The bachelor thesis deals with the use of a heat pump for heating a family house. In the theoretical part of the thesis the principle of operation of the heat pump is introduced. This part also explains the coefficient of performance and describes the different types of heat pumps according to the heat source with their advantages and disadvantages. In the practical part the thermal losses of the selected building are calculated. The heating system is designed and finally the economical evaluation and the return of investment are determined.
|
guest ::
