Národní úložiště šedé literatury Nalezeno 26 záznamů.  1 - 10dalšíkonec  přejít na záznam: Hledání trvalo 0.01 vteřin. 
Energetické nároky krytého lyžařského svahu
Mozola, Ondrej ; Linda, Jakub (oponent) ; Pospíšil, Jiří (vedoucí práce)
Táto diplomová práca sa venuje problematike energetických nárokov na prevádzku krytých lyžiarskych svahov. Prvá časť je venovaná rešerši výroby snehu, chladenia a konštrukčných spôsobov stavby krytých hál s príkladmi konkrétnych projektov. V druhej časti bolo cieľom navrhnúť halu s konkrétnou geometriou a izoláciou a potom definovať straty takejto budovy. Následne boli určené všetky súvisiace energetické toky, ktoré viedli k stanoveniu potrebného chladiaceho výkonu. Na základe toho bol spočítaný chladiaci cyklus a stanovená potreba elektrickej energie na prevádzku haly počas roka. V tretej časti sú zhodnotené tri možnosti pokrytia potrieb elektrickej energie a zároveň sú porovnané z hľadiska finančných nákladov v priebehu roka.
Construction and building of a wind turbine
Pavlík, Šimon ; Linda, Jakub (oponent) ; Škorpík, Jiří (vedoucí práce)
The aim of the bachelor thesis is to write a background research which deals with construction and building process of big wind turbines. The theory of potential wind energy and fundamental principal of the wind power are introduced in the first chapter of this bachelor thesis. The second chapter deals with the description of each part of wind turbine and the differences in their construction depending on individual needs. Third chapter presents problems and solutions of transportation and construction of wind turbines. Fundamental building and logistic mechanisms are also included. The last part of this bachelor thesis is focused on multi-rotor wind turbines which can represent the future in the wind power industry.
Stanovení uhlíkové stopy různých technik zpracování odpadu
Suchomel, Ondřej ; Linda, Jakub (oponent) ; Köbölová, Klaudia (vedoucí práce)
Bakalářská práce se zabývá problematikou zpracování odpadů, odpadového hospodářství a uhlíkovou stopou. Cílem práce je pochopit komplexní problematiku těchto odvětví a na základě provedené rešerše vytvořit návrh pro město Brno. První teoretická část se zabývá objasněním výhod oběhového hospodářství a analýzou odpadů v ČR. Další část vystihuje výhody a nevýhody uhlíkové stopy a je zde popsán její výpočet. Poslední dvě teoretické části rozebírají možnosti a metody zpracování odpadů jak konvenčními, tak moderními postupy. Poslední část této práce je návrhově výpočetní a zabývá se návrhem zpracování odpadů pro město Brno. Konkrétně práce řeší výhody a nevýhody mezi kompostováním a anaerobní digescí pro zpracování bioodpadu. Na základě výpočtů byl stanoven závěr o reálném využití těchto technologií.
Wind machines for urban areas
Linda, Jakub ; Pospíšil, Jiří (oponent) ; Škorpík, Jiří (vedoucí práce)
The submitted diploma thesis deals with wind machines in densely populated areas. The aim of the work is to design a appropriate wind machine for use on the roofs of buildings, including all the specifics that the air flow in the city may contain. At the beginning, the work focuses on the production of electricity in cities in general, which results in an ideal system of obtaining energy for households. Furthermore, the work deals with the wind in general, where all its specifics are taken over. A very important part of the work is the study of the specifics of air flow in the urban environment together with the numerical simulation of this flow, which results in certain regularities of the location of wind machines on the roofs of buildings. The work then passes to a search of used wind machines, from which the most suitable candidate for use in cities is subsequently selected. The last part of the work is the design of the machine itself for a specific location. In this chapter, the design wind speed is determined from the measured data, which is later followed by the calculation of the geometry of the blades, and finally its benefits and advantages are determined from the properties of the wind machine
The concentration of fine particles in the indoor environment of buildings
Turčina, Lukáš ; Linda, Jakub (oponent) ; Köbölová, Klaudia (vedoucí práce)
The issue of health is given a great deal of attention. However, human health is mainly affected by what enters the human body during life. Therefore, the emphasis is mainly on the quality of water, food, air or the overall environment in which people live. This bachelor thesis is focused on the issue of fine particles in the indoor environment of buildings, in which people spend most of their lives. Many of these particles enter the ambient air from the daily processes that people perform in the households. A high concentration of fine particles results in a greater probability of these particles entering the human body, where they can subsequently cause serious health problems. The theoretical part deals not only with the structure, size and impact of fine particles on the environment, but also on techniques for identification and measurement of fine particles, or methods of indoor air purification. The practical part is focused on the experimental measurement of fine particles in the indoor environment of buildings during everyday activities such as cooking, cleaning or using some equipment. The measurement results have shown that, especially during cooking and baking, a huge amount of particles enters the indoor air, especially PM1 particles, which have not yet received sufficient attention. Therefore, it is important to find suitable measures to eliminate these particles.
Utilization of carbon fibre for construction of elastic elements of mountain bike rear triangle
Linda, Jakub ; Švancara, Pavel (oponent) ; Březina, Lukáš (vedoucí práce)
The aim of the thesis is to design a carbon elastic element in the suspension mechanism of the rear wheel of a mountain bike. The elastic element will replace the rotary link and its deformation will allow movement of the rear wheel suspension mechanism. At the beginning, the thesis deals with the theoretical introduction to bicycle geometry, types of rear wheel suspension mechanisms and their characteristics. Later on, the work is devoted to composite materials in general, and it also deals with methods of manufacturing a composite bicycle frame and deals with the mechanics of composites. Further, the thesis is focused on the research of already existing frames utilizing the flexible element in the suspension mechanism of the rear wheel. Finally, the work focuses on the design of a full-suspension bicycle using a flexible element, justifies the choice of the replaced suspension mechanism and also justifies the individual simplifying assumptions and their impact on the solution. The elastic element is analyzed for deformations and stresses in the Ansys software. Finally, the results of the analysis and recommendations are presented.
Possibilities of using biomass for home heating
Jurák, Matúš ; Linda, Jakub (oponent) ; Lachman, Jakub (vedoucí práce)
This bachelor thesis deals with pellets and agropellets and their combustion, where main attention is given to emissions and their efficiency. Thesis consists of two parts. First part is theoretical, which consists of shown types of biomass, their properties and emissions created during combustion. The second part is experimental and its task is to compare efficiency and emissions created during combustion
Malé větrné turbíny v městském prostředí
Ondráček, David ; Škorpík, Jiří (oponent) ; Linda, Jakub (vedoucí práce)
Tato práce je zaměřena na problematiku použití menších větrných turbín v městském zastavěném prostředí. Začátek práce se věnuje základní teorii o větru, jeho vzniku a specifickém proudění vzduchu v zastavěném prostředí. Následně je v práci provedena rešerše aktuálně dostupných větrných turbín vhodných právě do městského zastavěného prostředí a s ohledem na specifické proudění vzduchu v tomto prostředí jsou navrženy možnosti na zvýšení efektivity těchto turbín. Další část práce rozebírá zkušenosti ze skutečných instalací. Závěrem práce jsou počítány energetické zisky generované vybranou turbínou a fotovoltaickými panely v dané lokalitě, zakončené porovnáním vhodnosti těchto dvou zdrojů obnovitelné energie.
Energetické využití biomasy cestou mokré fermentace
Odehnal, Lukáš ; Linda, Jakub (oponent) ; Kalivodová, Markéta (vedoucí práce)
Závěrečná práce se zabývá energetickou bilancí konkrétní bioplynové stanice Valeč u Hrotovic. Text je rozdělen do pěti bloků, kde v prvním jsou rozebrány zdroje biomasy a její energetické využití. Druhá část pojednává o procesech technologií využívající mokrou fermentaci. Třetí kapitola popisuje konkrétní bioplynovou stanici. Čtvrtý úsek se zabývá výpočtem bilance výroby elektřiny a tepla a v poslední části práce je shrnutí vypočtených hodnot a porovnání využité technologie s jinými možnými technologiemi bioplynových stanic.
Storage systems for renewable energy
Šebek, Denis ; Linda, Jakub (oponent) ; Poláčik, Ján (vedoucí práce)
The accumulation of energy by hydrogen technologies is an important topic for the advancment of energetics in the future. This thesis is based around different methods of accumulation of energy including acumulation of energy by hydrogen technologies. Furthermore, the thesis describes methods of hydrogen storage, its advantages and disadvantages, and the overall principle. In the last part of the thesis, a hydrogen accumulation plant is designed, which uses electricity from renewable sources as its energy source.

Národní úložiště šedé literatury : Nalezeno 26 záznamů.   1 - 10dalšíkonec  přejít na záznam:
Viz též: podobná jména autorů
2 Linda, Jan
Chcete být upozorněni, pokud se objeví nové záznamy odpovídající tomuto dotazu?
Přihlásit se k odběru RSS.