|
|
Apartment building
Drinková, Natalie ; Juráň, Vladimír (referee) ; Brukner, Bohuslav (advisor)
The subject of this bachelor‘s thesis is the design of a new apartment building and the elaboration of project documentation for the construction. The apartment building is located on the outskirts of the village Jiříkovice on a flat plot. The building is designed as a detached building with an underground floor and four above-ground floors. The individual floors are connected by staircase and a lift. The above-ground part of the building contains seven residential units. The underground part of the building contains a collective garage and technical facilities of the house. In the collective garage of the apartment building there are six parking spaces, of which one parking space for people with reduced mobility and orientation, and three outdoor parking spaces in front of the entrance to the underground collective garage. The vertical supporting structures of the above-ground part of the building are made of ceramic blocks and in the underground part they are monolithic made of reinforced concrete. Horizontal supporting structures are monolithic reinforced concrete slabs. The building is based on foundation strips, insulated with a contact thermal insulation system and covered with a warm flat roof.
|
|
|
Small Apartment House
Kopecká, Lucie ; Šuhajdová, Eva (referee) ; Šuhajda, Karel (advisor)
This bachelor thesis deals with the design of a four-storey apartment building in Staré Město near Uherské Hradiště. The object is situated in a quiet part of the town and is set in a gently sloping terrain. It is based on strip foundations and has two types of roofing – above the second floor there is a green roof and above the third floor there is a non-walkable warm flat roof. The vertical load-bearing structures are designed from permanent formwork in the basement and from the Porotherm system on the above-ground floors. The Etics contact thermal insulation system is incorporated into the external wall. The floor structures, the walls near the lift, and the staircase are from the cast-in-place reinforced concrete. The building consists of a basement and four storeys with a total of seven dwelling units. On the ground floor there is a wheelchair accessible flat. The other dwelling units have access to a balcony or terrace. On the ground, first, and second floor there are two flats. On the third floor there is only one flat. The habitable rooms of each flat are situated to the southwest. In the basement there are cellar units for each dwelling unit, a bicycle room, cleaning room, and two utility rooms. From the southwest part of the plot, there are parking places for the residents, bicycle stands, and a place for recycling. A 3D model of the building has been built.
|
|
|
Flat House in Boskovice
Ludvík, David ; Novotný, Miloslav (referee) ; Novotný, Miloslav (advisor)
This bachelor thesis deals with the design of a detached apartment building in Boskovice. The object of the apartment building is set in a slightly sloping terrain, has one basement and three above-ground floors. There are six covered parking spaces and nine residential units. On each floor there are three residential units of different layout. The building is designed from a structural system of ceramic fittings, basement and part of the foundation structure are from lost formwork. The ceilings are monolithic reinforced concrete, the roof is designed as a warm flat roof. The work includes project documentation for the construction.
|
|
|
Winery
Pospíchal, Roman ; Sibilla, Luboš (referee) ; Matějka, Libor (advisor)
The diploma thesis deals with the design of the new building of the winery with the possibility of accommodation near of Klentnice. The building consists of four parts. The first is the production where grapes are degraded, fermented, pressed, stored, bottled, labeled and subsequently exported. The second is the administrative part where are three offices. The third is a tasting section overlooking the vineyards. The last one is the accommodation with a capacity of 7 rooms. The building is basement and has two floors.
|
|
|
Preparation of realization of the monolithic skeleton of the Třebíč hospital surgery pavilion
Hlávka, Jan ; Doubek, Rostislav (referee) ; Kantová, Radka (advisor)
The aim of this thesis is to process the technological stage of the upper gross construction of the hospital pavilion in Třebíč. The building is designed to provide medical care and amenities. It is mainly an underground construction with one underground and five above-ground floors. The main structural constructions are monolithic skeleton supplemented with reinforcing walls and cores. The cladding is lined with brick blocks Porotherm. The subject of the processed technological stages is the solution of monolithic reinforced concrete vertical and horizontal supporting structures. Within the framework of another assignment, proposals for protection against monolithic reinforced concrete structures and protection against leased radiation are processed.
|
|
|
Pension
Šulcová, Helena ; Spáčilová, Jitka (referee) ; Spáčil, Miroslav (advisor)
The subject of the bachelor's thesis is a project of a detached guest house situated in a sloping terrain in Rokytnice nad Jizerou. The pension has a capacity of 18 beds. The building has three floors, of which two floors above ground and one underground floor. The basement is lined with lost formwork and covered with a cross-reinforced monolithic slab ceiling. The upper floors are bricked using the POROTHERM system. Above the first floor there is a wooden beamed ceiling complete with a reinforced concrete slab and a plasterboard ceiling. The building is roofed using a traditional truss, which, complete with a plasterboard ceiling, also forms the ceiling of the second floor. In the basement there is a games room, gym, wellness and technical facilities of the building, on the first floor there is a bike shed / ski room, a lounge with kitchen and one apartment, the second floor is filled with four apartments.
|
|
|
Apartment building
Kašpárová, Darina ; Kvapilová, Vendula (referee) ; Daněk, Lukáš (advisor)
The goal of this bachelor thesis is to elaborate the project documentation of a newbuilt apartment building in Partizánske. The apartment house is designed as a three-storey building with a basement. There are 9 apartments in above-ground floors and in the under-ground floor there are common premises of the house equipment. Each of apartments has a balcony, the flats located on the first floor have small gardens. The top floor is designed as a recessing floor and a terrace belongs to the apartments located on this floor. The vertical loadbearing structure is made of ceramic blocks and partly reinforced concrete, the horizontal load bearing is designed as cast-in-place reinforced concrete. The roof is designed as a one-layer flat roof. The work includes project documentation for the construction.
|
|
|
Detached house with business premises
Pokorný, David ; Juráň, Vladimír (referee) ; Brukner, Bohuslav (advisor)
The subject of the bachelor thesis is the processing of project documentation for the construction of a family house with an establishment. This building is designed in a slightly sloping terrain on the edge part of the village Holasice, part of Brno-countryside. The family house has a partial basement and two floors. Establishment is designed as a single-storey building with own access from the road and will be used for design activities. The building is based on plain concrete strip. Vertical structures are designed from ceramic blocks. Vertical stuctures of the basement will be also protected by a layer of permanent blocks. The roof of the family house is designed as a gable, above the garage is a flat roof with a vegetation area. Ceiling structures are made of monolithic, reinforced concrete.
|
|
|
Apartment building
Šibalová, Lenka ; Novák, Michal (referee) ; Daněk, Lukáš (advisor)
The goal of this bachelor thesis is elaboration of project documentation of new apartment building. The building is alone standing and is situated on several lands of one investor in city of Kyjov in cadastral territory Kyjov [678431]. The building has one underground floor and four above ground floors. In the basement are designed eight parking spaces, small warehouses, technical room, bicycle room and a boardroom. The vertical supporting structure of above ground floors are made from ceramic blocks and the vertical supporting structures of the basement are made from impermeable concrete. The supporting horizontal structures are designed as monolithic reinforced concrete slabs. The whole building is insulated by contact thermal insulation system. The roof is flat and designed as green. Project documentation was prepared according to valid legal and technical regulation.
|
|
|
Wellness Hotel
Kašpárová, Darina ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
The subject of the diploma thesis is to elaborate the project documentation of a newbuilt wellness hotel located in the village of Lipno nad Vltavou. The building is designed as a non-basement one with three floors. It is visually divided into several parts. On the first floor there are two operational parts – a wellness and a restaurant. On the second and third floor there are small apartments for temporary guests' accommodation. The building foundations are made of concrete and reinforced concrete. The load-bearing structure is made of aerated concrete blocks and sand-lime blocks. The ceiling structures are made of cast-in-place reinforced concrete. The roof of the first floor is designed as a one-layer flat extensive green roof. The roofing of a main reception is designed by a sloping roof and the third floor as three adjoining sloping roofs. These roofs are formed by a system of aerated concrete roof panels and a water-dissipating layer of folded sheet metal. The building is insulated with an external thermal insulation composite system (ETICS). The part of the facade consist of facade cladding strips and part of the render of light color.
|
guest ::
