|
|
Office Building
Pospíšil, David ; Mazánek, Pavel (referee) ; Košíčková, Ivana (advisor)
My thesis solveses the office building. The building will be located in Šumperk. It will be located near the center. The building has two floors and a partial basement floor. Ceilings are beams with ceramic inserts and reinforced concrete slabs. Vertical structure consists of a ceramic blocks in the aboveground parts and concrete blocks in the underground section. The roof is walked on vegetation. The staircase is reinforced concrete, monolithic. The entire building is insulated with mineral wool. Basement is insulated with polystyrene foam.
|
|
|
Administrative building Brno Hlinky, implementation of facade and roof cladding
Dušková, Lucie ; Liška, Pavel (referee) ; Kovářová, Barbora (advisor)
The subject of this Bachelor thesis is offering solution of technological steps roofing and cladding of an office building in Brno, Hlinky. It is a two storey building, partial basement, the overall module dimensions 9.4 x 37.5 m. Main supporting skeleton consists of roof trusses and ceiling beams that are attached to poles. The roof is purlin, load-bearing layer is trapezoidal sheet, which is on the top flange purlins. The walls are self-supporting, walled. Roof cladding is insulated with layer of polystyrene, the main waterproofing layer is mPVC film. Most of the cladding is designed as external thermal insulation composite systems with ceramic tiles, part of the facade on the west side of the building is made up of wood paneling with an air gap.
|
|
|
Mineral wool and binding agent interaction and behavior study
Fiala, Michal ; Šoukal, František (referee) ; Ptáček, Petr (advisor)
Diploma's thesis describes resolution of cause technological problems in mineral wool manufacturig in company Saint-Gobain Orsil. Main attention is paid to thermal and volatile process in mineral wool from filtration chamber and common commercial sales. Samples of mineral wool were characterizated by thermal analysis (simultaneous TG-DTA), effluent gas analysis (EGA), infrared spectroscopy (FT-IR), electron microscopy (SEM) and X-ray diffraction (XRD). Thermal analysis experiments was used to check thermal volatile processes. Technological problem of burning is linked with rise of isocyanic acid.
|
|
|
Study of reaction to fire tests for thermal insulating materials
Krivda, Antonín ; Novák, Vítězslav (referee) ; Sedlmajer, Martin (advisor)
This bachelor thesis deals with thermal insulation, it is fire resistance and reactions to fire. The thesis also approaches the testing of thermal insulation materials. In detail, it focuses on the Small flame test, Calorific value determination and the Flameproof test. The test methods were performed on insulators based on polystyrene and mineral wool. The literary research focuses on the fire safety of buildings that have been already insulated.
|
|
|
Vizualization of flow of fibers from insulation mineral wool
Kedajová, Kristýna ; Elcner, Jakub (referee) ; Lízal, František (advisor)
One of the most used insulation materials of our time is mineral wool. As with formerly used asbestos, not all the health impacts of mineral wool fibers inhalation are known. The aim of this thesis is to gather findings relating to the transport of aerosols, their deposition in human airways and to obtain and statistically evaluate experimental data from the visualization of fibres in the glass tube resembling human airways. This data can improve understanding of the relation between glass fibres action and possible health hazard.
|
|
| |
|
|
Retirement center in Velké Poříčí
Vondrová, Michaela ; Herman, Adolf (referee) ; Bantová, Sylva (advisor)
It is about new-built Retirement center standing alone in the cadaster unit of the town Velké Poříčí. The building has four- floors without basement. It is located in flat terrain near the river in quiet location. The house is built as letter L form. The Retirement center is adapt for disabled people. In the first floor is dining room, doctor´s office, part for employees and technical facilities for house. In the second and third floors are apartments. There are 12 single rooms for one person, 6 single rooms for pair with sleeping in one room and 4 apartments for couple with separated bedroom. In the fourth floor is access to roof terrace. The structural systém of the building is composed of precast concrete frame by Prefa, infill wall from ceramic masonry. Vertical structures are built by prestressed concrete floor slab Spiroll. The building has ventilated facade with mineral wool with facade cladding. The roof is warm flat roof with half intensive green roof.
|
|
|
The influence of the outdoor temperature on the properties of the reinforced layer in the implementation of ETICS
Novotný, Michal ; Gašparik,, Jozef (referee) ; Schmid, Pavel (referee) ; Sedlák,, Petr (referee) ; Lízal, Petr (advisor)
The trend in today's civil engineering are growing demands for quality and comfort constructed buildings and spaces in them. This trend causes a change in the approach to designing buildings and building new buildings. One of the main directions great importance is attached dedicated reconstruction of buildings and their technical adjustments to meet the ever increasing demands being norms and laws. One of the most monitored parameters are thermal-technical characteristics of objects - i.e. better quality means saving on heating costs. In this connection there is a big trend of the modern construction industry and building insulation, mainly ETICS systems. Dissertation focuses on the basic (reinforced) layer of the ETICS and examines the effect of low temperatures, acting on the matter in the implementation of the system, the properties of this layer. This coating is one of the key elements of the system, which more or less determines the quality and durability of the system. The first part deals with the current state of the problem and generally insulation systems, basic types and the advantages and disadvantages of these systems. In the main part of the work is solution focused work, its objectives and methodology for testing materials using laboratory tests and are mentioned outputs of experiments in terms of results. The final section addresses the evaluation of the data and results and output for construction practice. The theme of work was also addressed in the specific research. The works are also numerical and graphical attachments to records of experiments and calculations.
|
|
|
The impact of executing new thermal insulation on an administrative building in Blansko on the expenses associated with its operation
Kopřivová, Petra ; Bradáč, Albert (referee) ; Čech, Josef (advisor)
The topic of the diploma thesis „ The impact of executing new thermal insulation on an administrative building in Blansko on the expenses associated with its operation“ is a draft and appraisal of four variants of thermal insulation of the building (EPS, EPS G, Mineral wool, Phenolic foam). It deals with an actual building situated in Blansko. All the variants are projected according to the same technical specifications (thermal transmittance) and their thermal parameters, technical parameters and the rate of return have been assessed. The assessed building (The A building) is at rectangular shape. It has six above - ground floors and a basement, it contains mainly administration sites. The construction system is concrete frame, which has curtain wall made of perforated blocks with thickness 250 mm. The building has got reinforced concrete floors, the roofing is made of double-skin roof construction. The supply for heating is a separate gas boiler room.
|
|
|
Home for seniors
Koláříková, Eliška ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The aim of the master´s thesis is to design a Residential care home as smart building. It is situated in the centre of Křenovice near Brno. The master´s thesis is divided into three parts, first part presents design documentation, second part is focused on building services and the final part presents noise control in building. Residential care house is designed as two-storey building without basement with flat roof. On the first floor there is utility area for senior house and healthcare facility and on the second floor there are flats for seniors. Residential care house is built on footing. Load-bearing and non-load-bearing walls are designed from hollow bricks type THERM. External walls are insulated with mineral wool. The roofing of residential care house is made up of extensive green roof. The building services of the building includes two ground-water heat pumps with boreholes for heating and cooling, photovoltaic panels, HVAC, hot water cylinder and rainwater storage tank. The final part is focused on noise control in building. It is about acoustic in construction. Noise study is also included.
|
guest ::
