|
|
Radar Altimeter for Ultramicro Airplanes
Imrich, Marek ; Maršík, Lukáš (referee) ; Zemčík, Pavel (advisor)
Radar equipment is an integral part of the aviation sector. It is very important to use a suitable module to guide ultralight aircraft during landing. The bachelor thesis is focused on the use of altitude radar based on the microwave sensor IWR6843ISK manufactured by TEXAS Instruments and its application in practice for ultralight aircraft. Its ability in conjunction with a computer is the altitude guidance of an ultralight aircraft to the runway by generating sound tones to indicate to the pilot the distance above the terrain. The main goal of this work is to design a model for the use of a microwave module in conjunction with a computer and its subsequent testing of the suitability for use in performing a landing maneuver. The aim of this work is to design a system that works with millimeter radar and its evaluation of usability in practice. The proposed module generates point clouds, which are then parsed, then the output data are suitably correlated, further transformed to the exact height of the aircraft above the terrain with subsequent sound interpretation to the pilot.
|
|
|
Frequency synthesizer for microwave communication systems
Klapil, Filip ; Vondra, Vlastimil (referee) ; Kasal, Miroslav (advisor)
The main aim of the thesis is to develop a solution of a frequency synthesizer for a microwave communication systems. Specifically, it suggests a design for frequency synthesizer with phase-locked loop. At beginning of the thesis the principle and basic properties of this method of signal generation are explained. Then it is followed by a brief discussion of the parameters of synthesizers and their influence on design. Another part of the work is the analysis of circuit the frequency synthesizer with the phase-locked loop MAX2871, which is followed by a proposal for the design of the frequency synthesizer module hardware. The last part of the work deals with practical implementation, verification of function and measurement of achieved parameters and their evaluation.
|
|
|
Radar Altimeter for Ultramicro Airplanes
Imrich, Marek ; Maršík, Lukáš (referee) ; Zemčík, Pavel (advisor)
Radar equipment is an integral part of the aviation sector. It is very important to use a suitable module to guide ultralight aircraft during landing. The bachelor thesis is focused on the use of altitude radar based on the microwave sensor IWR6843ISK manufactured by TEXAS Instruments and its application in practice for ultralight aircraft. Its ability in conjunction with a computer is the altitude guidance of an ultralight aircraft to the runway by generating sound tones to indicate to the pilot the distance above the terrain. The main goal of this work is to design a model for the use of a microwave module in conjunction with a computer and its subsequent testing of the suitability for use in performing a landing maneuver. The aim of this work is to design a system that works with millimeter radar and its evaluation of usability in practice. The proposed module generates point clouds, which are then parsed, then the output data are suitably correlated, further transformed to the exact height of the aircraft above the terrain with subsequent sound interpretation to the pilot.
|
|
|
Frequency synthesizer for microwave communication systems
Klapil, Filip ; Vondra, Vlastimil (referee) ; Kasal, Miroslav (advisor)
The main aim of the thesis is to develop a solution of a frequency synthesizer for a microwave communication systems. Specifically, it suggests a design for frequency synthesizer with phase-locked loop. At beginning of the thesis the principle and basic properties of this method of signal generation are explained. Then it is followed by a brief discussion of the parameters of synthesizers and their influence on design. Another part of the work is the analysis of circuit the frequency synthesizer with the phase-locked loop MAX2871, which is followed by a proposal for the design of the frequency synthesizer module hardware. The last part of the work deals with practical implementation, verification of function and measurement of achieved parameters and their evaluation.
|
|
|
Use of Microwave Heating in the Synthesis of Novel Polysaccharide Derivatives.
Taubner, T. ; Synytsia, A. ; Sobek, Jiří ; Kortanková, V. ; Čopíková, J.
Microwave-assisted modification of polysaccharides is a relatively new method. Microwave heating is used for improving of extraction, hydrolytic and synthetic procedures. Modification of polysaccharides with the microwave irradiation is effective, fast and economic. The aim of this study was to apply the microwave irradiation in synthesis of carboxymethylcellulose (CMC) derivatives. This polysaccharide and its methyl ester reacted with n-butylamine yielding N-butylamide. The reactions were subsequently monitored by FUR and organic elemental analysis of the products. Degree of substitution (DS) and reaction yields were calculated based on nitrogen and carbon contents. The optimal reaction conditions were found to prepare product with the highest DS. Amino-de-alkoxylation of CMC methyl ester was significantly more effective than direct microwave assisted amidation of CMC, and microwave assisted significantly improved amino-de-alkoxylation.
Fulltext: content.csg -  PDF
Plný tet: Proceedings of the ... Tauber, T._Use of microwave - PDF
|
|
| |
|
|
Preparation of Amide Derivatives of Oxidized Cellulose and Carboxymethylcellulose
Taubner, T. ; Synytsya, A. ; Sobek, Jiří ; Čopíková, J.
This work is focused on the preparation of amide derivatives of oxidized cellulose and carboxymethyl cellulose. Research involved the preparation of derivatives in two steps and the first preparation of a methyl ester of the starting polysaccharide, and then aminodealkyxilation with selected primary alkylamines, ethanolamine, ethylenediamine, hydrazine and hydroxylamine. Another part of the research included the direct amidation without intermediate steps starting polysaccharide preparation of methyl ester using the same reagents and support of microwave radiation. The obtained products were monitored by FT-IR spectroscopy and organic elemental analysis.
Fulltext: content.csg - PDF
Plný tet: SKMBT_C22012043014260 - PDF
|
|
|
The optimized microwave-assisted decomposition of formamides and its synthetic utility in the amination of purines and pyrimidines
Čechová, Lucie ; Jansa, Petr ; Šála, Michal ; Dračínský, Martin ; Holý, Antonín ; Janeba, Zlatko
The microwave-assisted decomposition of DMF was thoroughly studied and the reaction conditions (temperature, solvent effect, and effect of additives such as acids, bases, and salts) were optimized for its use in the amination reactions of various purines and pyrimidines.
|
|
| |
|
|
Microwave interconnection, realization, used technologies and operation
OLIVA, Radim
This work deals with generally questions of microwave connections. In work we found information about wire-less transfers dividend in line with frequence ray inclusive abstrakt of technology. Also there are general information about wireless transfer, used modulations and data security during the transfer. In praktical part we located concrete project of concept data trace, on which I worked and took part on realization.
|
guest ::
