|
|
Intrinsic power supply
Wurzel, Tomáš ; Bejček, Ludvík (referee) ; Beneš, Petr (advisor)
This thesis discusses development of intrinsically safe power supply designed for powering devices installed in areas with potentially explosive atmospheres. In this context, the work explains the concepts of intrinsic safety. Thesis describes the basic definition of intrinsically safe equipment, device parameter requirements and description of related standards matching ATEX directive. Thesis focuses on the design of internal circuits of intrinsically safe power supply whose principles are explained on the block diagram. Concrete parts of the block diagram are discussed and parameters of suitable components are calculated. The power supply is then built and its parameters are measured.
|
|
|
Mikroprocesor control for laboratory power source
Hauer, Petr ; Kubásek, Radek (referee) ; Szabó, Zoltán (advisor)
This bachelor thesis aims to design and implementation a laboratory power supply controlled by microprocessor and PC via USB. The theoretical part describes the USB bus and the manner of its implementation to the microprocessor. There are the basic types of switching and linear sources and methods of control by a microprocessor. The practical part deals with the design and implementation of the resource. The results of this work are the themes of control and power part of power supply, printed circuit boards, software for the PC and microprocessor and measurements on the completed source.
|
|
|
Educational tool with power supplies
Junasová, Veronika ; Šteffan, Pavel (referee) ; Levek, Vladimír (advisor)
This work deals with design and realization of board with numerous power supplies. It includes linear power supply, switching supply without inductor, switching supply with inductor using step-up and step-down converter. The board allows to choose between various output voltages, several input filters, output filters, loads and it enables to measure the temperature of used power supplies. It can be used for education and practical demonstration of basic properties, advantages and disadvantages of these supplies. Part of the thesis is a description of power supplies for low voltages, design of educational board and demonstration of results.
|
|
| |
|
|
High efficiency laboratory power supply
Tejmlová, Lenka ; Vochyán, Josef (referee) ; Petržela, Jiří (advisor)
The project shows the problems of power supply in electrical engineering. It describes the general parameters of these types of supplies and presents their characteristics. Based on these findings, it is also focused on the selection of specific elements of the laboratory supply, to reach the given parameters. It contains the recalculations of the parameters of other additional components. The overall scheme of the supply is divided into several blocks, thematically corresponded to subchapters. According to the accomplished concept the laboratory supply is realized and its parameters had been tested. Projects results are assessed at the end.
|
|
|
Power supply with current reversal
Hrdina, Adam ; Vorel, Pavel (referee) ; Huták, Petr (advisor)
This thesis describes the design of regulated power supply that allows the reverse direction of the current. The supply can as well work as an electronic load. The supply has continuous settings of voltage from 0 to 50 V and continuous settings of maximum current from 0 to 5 A. The first part of thesis consist general description of power supply and of electronic load. The second part then includes the main design of overall concept of the supply and design of individual components.
|
|
|
USBTMC bench power supply
Sehnálek, Lubomír ; Vyskočil, Pavel (referee) ; Kubíček, Michal (advisor)
This thesis was selected due to establishing of universal platform for USBTMC remote instrumentation and constructing a laboratory DC power supply for hobby use. This thesis is focused on design and realization of regulated linear DC power supply. At first thesis mentions kinds of DC power supplies and kinds of interfaces used for test and measurement instruments. Thesis continues by describing of blocks of a developed linear DC power supply with an USB interface following the USBTMC specification for remote control. Thesis ends by realization of the regulated linear DC power supply with USBTMC interface. It was achieved acceptable results. Communication between PC and Control module works well as same as communication between Control module and Power supply module. Maximum output ranges of voltage and current are 40V and 3A. Big interference on auxiliary supply rail decreases accuracy.
|
|
|
Design of triple laboratory power supply
Gerbel, Patrik ; Kubíček, Michal (referee) ; Brančík, Lubomír (advisor)
This semestral thesis deals with designing triple laboratory power supply. There are three outputs in the device. One of them is built with switching regulator LTM4605 and it‘s output voltage can be regulated in the range of 0 to 6 volts. Maximal output current is 5A. The rest is realized as linear with voltage regulated output of 0 to 30V and adjustable current limitattions in range of 0 to 3 A. Output parameters are registered by double microcontrollers and shown on two LCD displays.
|
|
|
Digitally controlled linear power supply
Mikulka, Martin ; Šteffan, Pavel (referee) ; Háze, Jiří (advisor)
This bachelor thesis is focused on the design and realization of laboratory power supply with digital control. The power supply contains two separate galvanically isolated channels with output parameters in ranges of 0 - 24 V and 0 - 5 A. Output parameters are controllable independently via front panel or remote control. This power supply allows user to connect other channels meeting the condition of galvanic isolation and communication via the I2C interface. The content of this work is a theoretical analysis of the design of linear regulators, design with practical implementation and subsequent measurement.
|
|
|
Laboratory tool with power supplies
Grufík, Adam ; Novotný, Radovan (referee) ; Levek, Vladimír (advisor)
The aim of this work is to become familiar with different kinds of commonly used power supplies, measure and compare their properties and then design laboratory teaching board with multiple supplies. The designed instrument can be used for educational purposes and as a demonstration in the field of voltage sources.
|
guest ::
