|
|
Proposal of conformity assessment and inspection procedure of a cyllinder flange
Ondruška, Jan ; Jankových, Róbert (referee) ; Harčarík, Matej (advisor)
This bachelor thesis contains the control plan creation procedure for conformity assessment of a cylinder flange. The thesis includes a selection from standards related to the above-mentioned problems and the drawing documentation of the part. The cylinder flange is analysed in terms of function and unambiguous specification of geometry on the drawing of the part with regard to further part inspection. Any deficiencies in clarity are dealt with in more detail and solutions to these problems are proposed. Control plans for inspection of the part directly in the manufacturing process and for inspection of the part during sampling were created using CAQ software and are attached to the work. The results of the work have been used to improve the process of manufacturing of the part.
|
|
| |
|
|
Pressure vessel contor plan
Tesařová, Tereza ; Kotek, Luboš (referee) ; Rozehnalová, Jana (advisor)
The aim of this bachelor thesis is to create a control plan for a pressure vessel in cooperation with company Frauenthal Automotive Hustopeče s.r.o.. In the theoretical part of thesis I deal with the subject and its related documents or standards. Then I describe utilization all of related documents and creation of control plan in the practical part.
|
|
|
Coarse substructure laboratory pavilion B1
Slovák, Martin ; Selník, Petr (referee) ; Vlčková, Jitka Laura (advisor)
Thesis comprises solutions for the process of construction of the substructure of a building in the complex Znojmo Hospital. The work deals with technological requirements for foundation construction, especially technique for retaining wall. It also deals with the design mechanical assemblies, schedule and itemized budget. The basis for the preparation of the summary technical report for building management including drawings.
|
|
|
Private clinic Slavkov - building and technological project
Hartenberger, Lukáš ; Štěrba, Martin (referee) ; Vlčková, Jitka Laura (advisor)
The subject of my thesis is the construction and technological project of the new private clinics in Slavkov near Brno in South Moravia. The main goal of my work is a study of implementation of major technological stages of building. These technological steps will cover the main building. This study will be established timetable. Furthermore, the project will be processed construction site, the design of the main building machines and mechanisms, with the budget bill of quantities for the main building structure. Technological specification and control plan is prepared for the realization of construction scaffolding, flat roofs and implementation envelope. Re-entering the occupational health and safety plan for the aforementioned works.
|
|
|
Rationalization of production of digital receiver
Polák, Martin ; Maruška, Josef (referee) ; Špinka, Jiří (advisor)
This diploma thesis deals with topics related to optimalization and increases quality production in the electronics industry. Project purpose was to analyze process production manufacturing digital receiver in specific situation applied upon multinational company. Main part mine work was build-up FMEA analysis and creation control plan production line. For optimize production flow was application method lean production and for department material supply method KANBAN. This diploma thesis has been written within cooperation of Celestica Ráječko company where I have picked up data and knowledge to above-mentioned topic.
|
|
|
Pressure vessel contor plan
Tesařová, Tereza ; Kotek, Luboš (referee) ; Rozehnalová, Jana (advisor)
The aim of this bachelor thesis is to create a control plan for a pressure vessel in cooperation with company Frauenthal Automotive Hustopeče s.r.o.. In the theoretical part of thesis I deal with the subject and its related documents or standards. Then I describe utilization all of related documents and creation of control plan in the practical part.
|
|
|
Proposal of conformity assessment and inspection procedure of a cyllinder flange
Ondruška, Jan ; Jankových, Róbert (referee) ; Harčarík, Matej (advisor)
This bachelor thesis contains the control plan creation procedure for conformity assessment of a cylinder flange. The thesis includes a selection from standards related to the above-mentioned problems and the drawing documentation of the part. The cylinder flange is analysed in terms of function and unambiguous specification of geometry on the drawing of the part with regard to further part inspection. Any deficiencies in clarity are dealt with in more detail and solutions to these problems are proposed. Control plans for inspection of the part directly in the manufacturing process and for inspection of the part during sampling were created using CAQ software and are attached to the work. The results of the work have been used to improve the process of manufacturing of the part.
|
|
|
Coarse substructure laboratory pavilion B1
Slovák, Martin ; Selník, Petr (referee) ; Vlčková, Jitka Laura (advisor)
Thesis comprises solutions for the process of construction of the substructure of a building in the complex Znojmo Hospital. The work deals with technological requirements for foundation construction, especially technique for retaining wall. It also deals with the design mechanical assemblies, schedule and itemized budget. The basis for the preparation of the summary technical report for building management including drawings.
|
|
|
Private clinic Slavkov - building and technological project
Hartenberger, Lukáš ; Štěrba, Martin (referee) ; Vlčková, Jitka Laura (advisor)
The subject of my thesis is the construction and technological project of the new private clinics in Slavkov near Brno in South Moravia. The main goal of my work is a study of implementation of major technological stages of building. These technological steps will cover the main building. This study will be established timetable. Furthermore, the project will be processed construction site, the design of the main building machines and mechanisms, with the budget bill of quantities for the main building structure. Technological specification and control plan is prepared for the realization of construction scaffolding, flat roofs and implementation envelope. Re-entering the occupational health and safety plan for the aforementioned works.
|
guest ::
