|
|
Sanitation installation in a multifunctional building
Vaněrka, Zdenek ; Bárta, Ladislav (referee) ; Vrána, Jakub (advisor)
The diploma thesis deals with the problems of sanitation installation in a multifunctional building in Kunstat. The theoretical part focuses on the analysis of the topic, with emphasis on the water demand. The experimental part focuses on drinking water consumption in real objects. The thesis also focuses on possible solutions given specialization. The project solves the sanitation installation of the multifunctional building in the selected variant. It is a multi-storey building where are a guesthouse for short-term accommodation, café, public toilets, commercial space and a fitness center.
|
|
|
Low-rise residental buildings
Skrývalová, Dominika ; Jacková, Eva (referee) ; Sátora, Josef (advisor) ; Mohelníková, Jitka (advisor)
The bachelor´s thesis "Low-rise residential buildings" deals with the construction of a residential buildings in Brno, Sadová. The residential building is designed on a corner plot which original use was as a meadow and garden area. The building is located on flat terrain. The project builds on the study "Panorama Kociánka", the intended construction of residential buildings on the northeast side of the land. The building has one underground and three floors. Building structure is created of wall system placed on concrete grid foundations. The roof is flat. Part of the bachelor´s thesis is the physical model and detail of sliding folding shielding panels.
|
|
|
Health Center
Hlídková, Jana ; Dohnal, Jakub (referee) ; Pěnčík, Jan (advisor)
This master´s thesis deals with a draft of a health centre building in Chlumec nad Cidlinou. The centre is situated on a corner building site with barrier-free access near the city centre. The building is designed with simple functional lines ground on foundation strips with flat green roof. The perimeter walls, internal load-bearing and shear walls are from vertically perforated T&G block bricks. Internal non-load-bearing prefab walls are coated with plasterboard. Ceiling constructions and an attic are made of monolithic reinforced concrete. The building envelope is insulated with mineral wool. Most of the perimeter walls are coated with breathable facade made of lacquered galvanized lamellas and minor part of walls is compositely insulated and plastered with a scratched facade plaster. The health centre building is notionally divided into two masses with a three-storey west part and two-storey east part of the building. Both parts are mutually connected by vertical communication space with elevator looped by counter clockwise three-flight staircase. Ambulant health care will be provided in total 9 consulting rooms, 3 ambulant care offices and private clinic with 3 consulting rooms. Independent business of the commercial area and café provide the additional function. The master´s thesis also includes assessments in terms of fire risk, energy saving and heat protection, acoustics and vibrations, lighting and sunlight.
|
|
|
The Building Minska Brno
Juchelka, Tomáš ; Ležatka,, Lukáš (referee) ; Pavlovský, Tomáš (advisor) ; Matějka, Libor (advisor)
This bachelor thesis is based on my architectonic study written during the third year of studying. The theme is the project related to the town house Minska in Brno which will be situated in the current blank space in the street Minska which is located in the town district Brno Žabovřesky. In the thesis this project is subsequently developed into higher levels in terms of project documentation. The main idea is the draft of dominant but at the same time undemanding objects in terms of material and operation which bring the order into the particular area. Currently there are simple family houses and four and five-storey buildings in particular. In their ground floors there are services, shops and things like that. The estate which is the basis of my project is situated in the blank space between two buildings and is very narrow, deep and oriented on north and south by its shorter sides. The draft of the building elaborated by myself is divided into two parts – SO1 and SO2 which are interconnected with smaller garden. First of them – SO1 is a part of built-up area related to the street Minska and is constituted by the basic cubic substance characteristic of five above-ground and one underground storeys. There are four residential units, non-residential commercial space and technical facilities. The second part SO2 is situated on the second side of the estate on its edge next to the street called Kubanska made of the same cubic substance and is divided into two higher four and five-storey parts and one lower single-storey part in the middle. There are six residential units, three non-residential ones, technical facilities and underground parking place. There are ten residential units and four separate commercial spaces designed in my project. In terms of construction both parts are arranged as longitudinal wall system made of reinforced concrete which is stiffened by means of core and monolithic ceiling of reinforced concrete.
|
|
|
Multifunctional Building
Ptáček, Lukáš ; Charamza, Josef (referee) ; Sukopová, Dáša (advisor)
The subject of this master’s thesis is elaboration of project documentation for a multi-functional building according to the actual standards and norms given by law. The object has four floor above the ground and one floor partly below ground level with nine flats and two commercial premises. Residential part and commercial premises are separated from each other operationally independent and accessible main entrances. The basisc are made from contrete strips. The house is made by a brick technology of a ceramic blocks. The external walls are insulated with certified contact thermal insulation system. The building is roofed with warm flat roof.
|
|
|
Condominium Hlinky in the city centre of Brno
Tomický, Ondřej ; Šubrt, Jan (referee) ; Dulenčín, Juraj (advisor) ; Hradil, Dušan (advisor)
In my bachelor thesis I further develop the architectural design I worked out during the fifth semester, at the subject AG034. My work was led by Ing. arch. Marcela Uřídilová. Now, I have elaborated the study led by doc. Ing. arch. Juraj Dulenčín, Ph.D., and Ing. Dušan Hradil, on the level of Documentation for building permit, and subsequently on the level of Documentation for Construction Execution. The theme of this work is the design of a multifunctional town house in a gap site between two existing buildings in Hlinky street in Brno. The 9.4-meter-wide gap is in a street with terraced houses, right next to the public transport stop, opposite the main entrance to the Brno Exhibition Center. The house has one basement and five above-ground floors, is based on a foundation slab and finished with a flat roof. It has a longitudinal wall construction system; the load is transmitted by reinforced concrete monolithic walls and ceilings. The house creates a height transition between both adjoining buildings. In the basement is located the technical facilities of the whole building, on the ground floor there is the main and secondary entrance, entrance for cars and the access to the parking stackers with eight parking places. On the 2nd floor is located a studio and office with a common hall. The 3rd, 4th and 5th floors contains two luxury maisonettes. The common partition between both apartments is located on the 4th floor. Across the entire height of the house pervades the inner core of vertical routes - staircase and elevator. The main mass of the house is aligned between adjoining buildings. On the south side, the last fifth floor is lightly indented from the street. On the north side, a mass of the space parking protrudes from the main mass of the building into the slope of Žlutý kopec. Because the building plot is enclosed by adjoining houses on two sides, the only free facades are oriented to the south and to the north.
|
|
|
civil building
Kožík, Jiří ; Spáčil, Miroslav (referee) ; Brukner, Bohuslav (advisor)
Subject of the solution master´s thesis is new civil building. It is five floors building with underground floor. The structual system is made by combination of RC frame and loadbearing masonry with monoplane roof. In underground floor is a garage. In First floor is designed for commercial and comunal activities. In next floors there is always 8 flats. Building is located in straight terrain in the development area of new houses in Zlin in area Bartosova.
|
|
|
Health Center
Kalenda, Lukáš ; Kozubíková, Ivana (referee) ; Matějka, Libor (advisor)
The subject of this master´s thesis is the preparation of selected parts of the project documentation for the construction of the health centre. The building is designed as nearly zero energy building. The aim is to design a suitable layout that meets the requirements for the operation of a small-scale health centre without an inpatient area. It is also necessary to select a suitable structural and material solution. The building is situated in a gap in an existing terraced development on a flat site. The building consists of three floors above ground and one underground floor. The foundation of the building is made up of plain and reinforced concrete foundations in combination with reinforced concrete footings in place of columns. The vertical load-bearing structures are made of therm ceramic blocks, which are supplemented by reinforced concrete columns inside the layout. In the case of the perimeter masonry, the construction is supplemented by a contact insulation system and a ventilated facade with cladding made of metal cassettes. The horizontal load-bearing structures are made of reinforced concrete monolithic slabs. Flat vegetated roofs are designed over the lower parts of the building. The uppermost roof plane is designed as a double-skin roof with a stacked concrete tile covering. In the basement area of the building there is a technical background, while it is possible to further subdivide these spaces and use part of them as a warehouse or filing cabinet. On the first floor there are 3 commercial premises usable for example as a pharmacy, optics and beauty salon. On the second floor there are a total of 5 surgeries with a common waiting room and 1 dispensary. There is also 1 commercial space usable as a massage studio. On the third floor there are 2 dental surgeries with a common X-ray room and one dental hygiene surgery. The layout of all floors also includes sanitary facilities divided for staff and visitors. The thesis includes an assessment of the proposed building in terms of building physics (thermal technology, acoustics and daylighting) and fire safety.
|
|
|
Medical centre
Jelínek, Roman ; Hnízdilová, Aneta Aya (referee) ; Manychová, Monika (advisor)
The subject of the master´s thesis is a new medical centre with nearly zero energy consumption and the processing of the design documentations for this building construction. The building is located in a quiet area of the village of Lužice near the town Hodonín. It is designed as a detached structure, with a three floors, located on almost flat terrain. On the first floor there are two surgery, facilities for staff, warehouses and technical facilities of the building. There are also two commercial premises - a pharmacy and a cafe. On the second floor there are five surgery, facilities for staff and technical facilities of the building. On the third floor there are five surgery, laboratory, facilities for staff and technical facilities of the building. In front of building and behind of building there is a large parking lot, the medical centre is a barrier-free by to the internal elevator. The construction system of the building is a two-way wall system. The perimeter masonry and internal load-bearing masonry is designed from vertically perforated brick blocks with P+D. The internal non-load-bearing masonry is made of vertically perforated brick blocks with P+D and assembled pre-walls from SDK. The horizontal structures are prefamonolitic, composed of POT beams and Miako ceramic inserts. Part of the ceiling structure consists of a reinforced concrete monolithic slab. The building is based on concrete founfation passes and covered with a single-layer flat roof.
|
|
|
Návrh rodinného domu s komerčním prostorem
Veškrňa, Adam
Diploma thesis devotes to design of detached house with a commercial space, made for business. Living area is solved as single-family house, for four, five-member family. Integral part of thesis is a design documentation consisting of drawings and text part, which is devoting to individual structural properties, technical amenities, energy performance certificate with a thermal assessment of structural design. Specialization of thesis is the daylighting, sunlight and insolation study of designed house and surrounding buildings.
|
guest ::
