|
|
Multifunctional apartment building
Raimundová, Kateřina ; Bochníček, Vojtěch (referee) ; Brukner, Bohuslav (advisor)
The subject of this bachelor's thesis is the development of a project for the realization of a multifunctional residential building in Třemošnice. It is a five-storey building with one underground and four above-ground floors. It is a detached building set in gently sloping terrain. The underground level is used as a mass garage and there are bicycle storage room and the building´s technical facilities. The first three floors fulfil the function for housing and there are a total of 10 housing units (1x1+kk, 3x2+kk, 4x3+kk, 2x4+kk). The fourth floor has a café with an outdoor terrace. Vertical supporting structures in the above-ground floors are made of Porotherm ceramic blocks, the underground part has supporting walls and columns of reinforced concrete. Horizontal supporting structures consist of reinforced concrete monolithic plates. The foundation is a foundation board, only the base strips are designed at the door. The roofing of the building is designed as a flat vegetation extensive roof. The terrace in the 4NP is also designed as a single-sheathed flat roof with a layer of wood-plastic planks. The whole object is insulated with the contact insulation system ETICS. The design also includes thermal engineering assessment, acoustic assessment, sun assessment and fire safety solution.
|
|
|
Apartment building
Hlásenský, Marek ; Leischnerová, Jana (referee) ; Brukner, Bohuslav (advisor)
The bachelor thesis deals with the project documentation for the construction of a residential building in Brno in the Brno – Žabovřesky district. The building is detached in a slightly sloping terrain in Podveská street. The residential building has four floors and a partially buried basement. In the basement are designed garage parking spaces, cellar cubicles and technical background of the building. There are a total of 11 residential units on the above-ground floors, 3 residential units on each floor (2×1kk and 3kk) except for the last floor, where there are only 2 residential units (1kk and 4kk). The house is designed as wheelchair accessible. The construction system of the apartment building is wall-based: the basement is made of a combination of monolithic walls and columns, and the brick floor is made of ceramic blocks. The horizontal structures consist of reinforced concrete monolithic slabs with one-way or two-way reinforcement. The perimeter walls are insulated with the ETICS contact insulation system. The foundation of the building is made on foundation strips and the roofing consists of a green flat roof.
|
|
|
Family house on a slope
Odložilíková, Monika ; Dohnal, Jakub (referee) ; Utíkalová, Ivana (advisor)
The subject of this bachelor thesis is the development of detailed design documentation for a family house situated on a slope in the village of Přílepy. The house is intended to serve as a permanent residence for a family of four. It is a two-storey detached building featuring a flat green roof and includes a garage for two cars. The property is set on gently sloping ground with a gradient from northeast to southwest. The floor plan of the house is a simple rectangular shape with a partially protruding section. The building is founded on a strip foundation, and the vertical perimeter structures are designed using the Porotherm system with a contact insulation system. Horizontal structures are designed as monolithic reinforced concrete. The individual floors are connected by a monolithic reinforced concrete two-arm staircase.
|
|
|
Single-family house
Ondříšková, Jana ; Leischnerová, Jana (referee) ; Struhala, Karel (advisor)
This work is devoted to the processing of project documentation for a family house. It includes documentation for building permits and technical equipment of the building. The building is designed on a plot with sloping terrain. The entrance to the building is situated on the southeast side. The designed house has an above-ground floor and a residential attic. The roof of the building is gable. The structural system of the house is made of ceramic bricks fittings with a ceramic-concrete ceiling system. The roof is designed in wood with inter-rafter insulation. The technical equipment of the building deals with the concept of electrical installations, heating with a heat pump, sanitary instalations with connection to drinking water and sewage disposal. FVE panels on the roof of the building are designed as a renewable energy source.
|
|
|
Family house with office
Křičenská, Michaela ; Pobucká, Slávka (referee) ; Sobotka, Jindřich (advisor)
The topic of this bachelor thesis is the project documentation of a detached house with a business premises – an office. The house is designed in the outskirts od Chrudim. The house has two above-ground floors with a residential attic, it is partly under the basement. The building is covered with a gable roof with a wooden truss. The garage adjoins the house from side. It is designed for two passenger cars. It is covered with a vegetation roof. The house is based on foundation strips made od plain concrete. The main entrance is oriented from the north side, the entrance to the premises is possible separately from the west side or access is possible from the house.
|
|
|
Energy-saving family house in Postřelmov
Komenda, Pavel ; Vendlová, Lucie (referee) ; Počinková, Marcela (advisor)
The aim of this bachelor’s thesis is the design of Energy efficient house in Postřelmov. This house is in new development area. The building has a rectangle shape with two floors. The building has a green flat roof and the ceilings are made of Spiroll. Car port is attached to the house on southern site and terrace is attached on east site. Both constructions are designed from timber. The main entrance is situated to north site. On the first floor is situated parent‘s bedroom with WC and bathroom. The kitchen is open to dining room and living room. Second floor is primary for children and their bedrooms with bathroom and home office. External, load bearing and partition walls on the first floor are consist of ceramic blocks 380 mm. External walls has also ETICS system consist of mineral wool 200 mm. Partitions on the second floor are made of Plasterboards. The building services include floor heating and mechanical ventilation services. Heating is facilitated by an air – water heat pump, primarily powered by solar energy harvested trought photovoltaic panels on the roof during daylight hours. The utility room also has battery storage for excess energy, which is used to power the rest of the house. Rainwater from all the roofs of the building is collected in a storage tank and the excess amount is drained into the ground using retention blocks. Additionally, the energy efficient house has integrated passive building elements that meet the requirements for classification in class A of the energy certificate.
|
|
|
Small apartment building
Bartoň, Vojtěch ; Bečkovský, David (referee) ; Vystrčil, Jan (advisor)
The subject of the bachelor's thesis is the processing of the design documentation for the construction of the apartment building. The building is located on the outskirts of the prštné města Zlín. The building is designed as a detached masonry building roofed with a flat green roof. The new apartment building has 3 above and 1 underground floors. There are 13 housing units of various sizes and layouts for a total of 30 people. The building is designed as a traditional masonry structure. The basement, ceiling structure and staircase are designed as monolithic reinforced concrete. The entire apartment building is equipped with the contact insulation system ETICS. The building was assessed for building physics and fire safety.
|
|
|
Apartment building
Pokorný, Václav ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
The subject of this bachelor’s thesis is the design of apartment building and the development of project documentation at the level of documentation for construction building. The new apartment building is located on the outskirts of Jihlava in the Helenín district. The building is designed as five floors building with a partial basement. It contains 12 apartment units with dispositions of 2+kk, 3+kk, 5+kk, which complement cellar cubicles and common areas for the residents of the building. The entrance to the building is located on the north side of the building. Vertical load-bearing and non-load bearing walls are designed from ceramic blocks of the POROTHERM system. The walls of the lift shaft are designed as cast-in-place reinforced concrete. The ETICS insulation contact system will be used to insulate the building. The foundation strips are designed from plain concrete and are connected to the partial basement part of the building with gradations. The foundation slab under the lift landing is designed from reinforced concrete. The horizontal structures are designed as cast-in-place reinforced concrete two-way slab and cantilever slab (at loggias). The roof of the building is designed as a single flat green roof (extensive). Within part of bachelor’s thesis is too designed construction physics and the fire safety solution of the building. Materials and colours were selected in accordance with the surrounding buildings.
|
|
|
Single family home Chudčice
Andrlová, Anna ; Müllerová, Eva (referee) ; Müller, Jan (advisor)
The subject of the bachelor thesis is the design of the specified part of the project documentation for the construction of a family house on a slope in the village Chudčice. The family house is designed as a two-story for a family of four. The building is located on a plot with sloping terrain. The family house is based on plain concrete foundations. The vertical supporting structures are designed from ceramic blocks of the Porotherm system, and the perimeter masonry is insulated with the ETICS contact system. Horizontal structures are designed as monolithic reinforced concrete. The building is covered with a flat roof. The main entrance to the building is located on the north side on the 1.NP. The family house is divided into a quiet part, a living part and a technical part. The building includes a carport for two cars and an outdoor terrace.
|
|
|
Apartment building
Tran, Martin ; Hradil, Dušan (referee) ; Kolář, Radim (advisor)
The subject of the bachelor's thesis is processing of project documentation for the construction of an apartment building with nearly zero energy consumption. The apartment building is in the eastern part of the city Brno and it´s set in gently sloping terrain. The building has two floors above ground and one with a partial basement. There is a total of five apartments units available 1+KK, 2+KK and 3+KK and technical facilities with storage space too. Structurally, the building is designed as masonry in combination with monolithic reinforced concrete ceiling and green roof.
|
guest ::
