|
|
Implementation of New Terminal Nodes to the Company and it’s Management
Lukeš, Pavel ; Šumbera, Tomáš (referee) ; Ondrák, Viktor (advisor)
This thesis deals with analysis of company’s MBG, spol. s r.o. problems, following with teoretical basis for these problems and in the end, it suggests the solutions. These problems are insufficient monitoring, any of used technology are old and absent of any information security management system. The first part is focused on a teoretical basis for the described problems, the second part will completely analyze all mentioned problems of a company. Final part will contain a solution for every company’s problem, based on theory and analysis with taking care about company’s demand too.
|
|
| |
|
| |
|
|
System for Guarding and Securing Objects and Areas
Kuchařík, David ; Kubek, Ján (referee) ; Strnadel, Josef (advisor)
This project deals with given safeguard possibilities, both mechanical and electronic. A row house with garden was chosen for being secured. Subsequently, were elaborated two`s proposals of securing and guarding of this object. First, was based on camera`s system and second on common system ESS. Later on they were evaluated and the most considerable benefits were emphasized. A system based on control panel with connected detectors was selected upon specification. Subsequently was created a model of the chosen system, at which the required behaviour was simulated and verified. An outline of an implementation was created in the C language.
|
|
|
Hardware and software solution for diagnostics and safety operation for robotic manipulator
Klimeš, David ; Kubela, Tomáš (referee) ; Grepl, Robert (advisor)
This thesis deals with design and use of manipuilator with three degrees of freedom. The main objective is to develop appropriate educational platform. Firstly, it deals with definition of the goals and design method based on kinematic and dynamic models. Another section is dedicated to the design and implementation of the electronics needed for the safe and reliable operation of the manipulator as a educational platform. The last part deals with the use of manipulator together with additional sensors as well as vision system. The result is a demonstration of tasks use of manipulator. Example of use of this educational platform is implemented in a few demonstration tasks.
|
|
|
Optimization of Company Information Infrastructure.
Luska, Jiří ; Holub, Zdeněk (referee) ; Ondrák, Viktor (advisor)
The thesis discusses the problems of data infrastructure in the company Instalační materiál – Herman s.r.o., which dealing with sale and comlex services in plumbing. The current state of computer networks is generally poor, combines current and older technologies, resulting in problems with the functionality of the sale system. Therefore the company decided to invest in upgrading IT. The goal is to evaluate the current situation and propose a range of optimization to an extent that meets the criteria of the company as a customer
|
|
|
Ovality measurement of extruded fiber using three cameras
Loučka, Pavel ; Martišek, Dalibor (referee) ; Štarha, Pavel (advisor)
One of the important parameters observed during extruded fibre fabrication is its diameter. The diameter can be measured with a single scanning camera assuming that the fibre section has a circular shape. As proved in practice, another important parameter is ovality, that is the rate of fibre flattening. This paper assumes that the fibre section shape is elliptical. In such a case, at least three different views on examined fibre are needed. Mathematical part of this paper is concerned with analytical description of fibre ovality measurement using two different approaches based on the knowledge of linear algebra, projective geometry and conic sections theory. Main goal of this paper is thus to use both mathematical theory and image analysis methods for ovality and diameter determination. Precise calcluation of such quantities is, however, conditioned on precise camera system calibration, which is described in the paper as well. Additionally, the work contains a brief mention of technical realization of ovality measurement and its possible difficulties.
|
|
|
Physical Security in an Industrial Company
Konečný, Pavel ; Ondrák, Viktor (referee) ; Sedlák, Petr (advisor)
The diploma thesis focuses on physical security solutions in an organization acting in a metallurgy segment. The analytical part identifies the weaknesses in individual areas of physical security according to ČSN/ISO 27 000 regulation. The practical part is divided into individual chapters bringing suggestions for corrections, modernization and modifications of the system. The theoretical part deals mainly with clarification of the terminology and proceses used in the practical part. I see the benefit of my work in the practical suggestions for the changes. If they are implemented correctly, the physical security of the organization will be of high quality.
|
|
|
Production of gas valves on the automatic line
Pešl, Milan ; Rumíšek, Pavel (referee) ; Štroner, Marek (advisor)
This thesis deals with the evaluation of manufacturing gas valves on the automatic line and the design of CCTV systems to detect errors at assembly in Honeywell Czech Republic Ltd. The aim of this thesis is mutual comparison of the respective proposed options of the camera system, their optimal selection, and the evaluation of detected errors of the line by using Pareto Charts. An integral part of this work is a brief description of the automatic line for gas valves and the history of Honeywell Company.
|
|
|
Modular CCD cameras surveillance system
Řezníček, Radek ; Kaczmarczyk, Václav (referee) ; Bradáč, Zdeněk (advisor)
This thesis deals with realization of modular camera system. Introductory part is focused on market research and concept of the system. Next part is dedicated to the choice of components for realization of the system. Practical part deals firstly with design of printed circuit board for supporting control unit which will be controlling peripherals like motion sensor, IR illuminator, eventually magnetic door contact and also focuses on software creation for main and supporting control unit.
|
guest ::
