|
|
Analysis ofelectrical output from the power plat working in the middle of town
Hrubý, Radek ; Brno,, Luděk Ondroušek - Teplárny (referee) ; Matoušek, Antonín (advisor)
The work focuses on outlet of the electrical power from power plants operating in urban areas. After a short analysis of the general possibility of leading out electric power from power plants of various types, thesis continues to describe of outlet electrical power from PPC Červený Mlýn. Subsequently, are calculated short-circuit conditions in the main switching station. It follows an analysis of power lines. The last part dealt with the issue of reliability of sources in connection with random transition processes in the electrical network and the light of the operational reliability of electrical power equipment.
|
|
|
Simulation of small single-phase transformer
Nevřivý, Tomáš ; Hájek, Vítězslav (referee) ; Vítek, Ondřej (advisor)
This bachelor‘s thesis deals with the complex design of single-phase transformer for low power transfer. The basis of the work is procedure of design referred to standardized tables together with the analytical calculation of all transformer parameters. The calculated parameters are verified using by finite element method in the environment of the program FEMM. Analytical calculation is verified by simulation in stationary and quasistationary magnetic field. The conclusion of the work is supplemented by measurement of the transformer, which according to the calculated parameters was made by company of ELEKTROKOV, Inc.
|
|
| |
|
|
Design, optimization and full load circuit simulation of the surface mounted permanent magnet machine
Bláha, Martin ; Ondrůšek, Čestmír (referee) ; Kurfűrst, Jiří (advisor)
This thesis deals with the possibility of using the finite elements method for the analysing of synchronous permanent magnets machines. The aim of this work is to discuss the possibility of the machine design more effectively with using the finite elements method and Maxwell software for the simulations. On the created parametric model, simulations were performed according to master thesis assignment. The aim of this work is to determine induced voltage, iron losses, machine inductances and make a permanent magnets demagnetization analysis. From simulations results the machine efficiency is calculated. The parametric model was used for the optimization of selected parameters. From results of optimization new dimensions of permanent magnets was obtained. Machine efficiency was increased by new permanent magnet material and optimized design.
|
|
|
Electromagnetic damper
Mikyska, Jan ; Huzlík, Rostislav (referee) ; Ondrůšek, Čestmír (advisor)
This master´s thesis is focused on obtaining electrical energy from vibration control car using electromagnetic dampers. The primary use of the electromagnetic damper is the production of electrical energy, which can then be used to power electrical appliances in your car or battery charging. The thesis is divided into six main parts: a literature review of possible ways of getting electricity from the car damping, theoretical and mathematical analysis of problems, the choice of design with computational analysis of dampers and power calculation.
|
|
|
Model of synchronous PM machine based on equivalent reluctance network
Sporni, Peter ; Lapčík, Josef (referee) ; Ondrůšek, Čestmír (advisor)
Táto práca pojednáva o problematike vytvárania a simulácie reluktančnej sieti synchrónneho stroja s V tvarovanými permanentnými magnetmi v programe PSpice. Na začiatku sa oboznámime s konštrukciou a parametrami stroja a potom vyvodíme základné rovnice na výpočet každého prvku siete. Vypočítame každý prvok tohto stroja a potom vytvoríme túto sieť v PSpice. Na začiatku je simulovaná sieť statická a všetky magnetické odpory sú lineárne. Neskôr nahradíme lineárne odpory reprezentujúce plechy nelineárnymi a počítame s precovnou teplotou permanentných magnetov. Potom porovnáme naše výsledky s FEM metódou počítanými hodnotami a vypočítame indukované napätie v jednej cievke stroja. Na záver vypočítame výkonovú a momentovú charakteristiku stroja.
|
|
|
Impact of Surface-Mounted Permanent Magnets Imperfections on the Machine
Vícha, Adam
Study sums up issues of mounting permanent magnets onto rotor surface of permanent magnet synchronous machine. Fully parametric model of rotor with surface mounted permanent magnet was created. Model was subjected to analysis of offset of permanent magnet, wrong magnetization and manufacturing width tolerance. Fourier transformation was performed with the results to separate the imperfections via cogging torque and induced voltages.
|
|
|
Simulation of small single-phase transformer
Nevřivý, Tomáš ; Hájek, Vítězslav (referee) ; Vítek, Ondřej (advisor)
This bachelor‘s thesis deals with the complex design of single-phase transformer for low power transfer. The basis of the work is procedure of design referred to standardized tables together with the analytical calculation of all transformer parameters. The calculated parameters are verified using by finite element method in the environment of the program FEMM. Analytical calculation is verified by simulation in stationary and quasistationary magnetic field. The conclusion of the work is supplemented by measurement of the transformer, which according to the calculated parameters was made by company of ELEKTROKOV, Inc.
|
|
|
Electromagnetic Flowmeter
Kulenda, Vít ; Uher, Miroslav (referee) ; Beneš, Petr (advisor)
Bachelor thesis describe elementary principle of electromagnetic flowmeter. It contain information about their attributes, construction, montage and using. Problem of this flowmeter are explained, which can appear during their using and building. Own constrution of electromagnetic flowmeter are part of thesis, where procedure of desing electronic circuits are decribed. In the end reports and graphs are published. Because this flowmeter are intended for laboratory, construction of vessels are contained too.
|
|
|
Electromagnetic damper
Mikyska, Jan ; Huzlík, Rostislav (referee) ; Ondrůšek, Čestmír (advisor)
This master´s thesis is focused on obtaining electrical energy from vibration control car using electromagnetic dampers. The primary use of the electromagnetic damper is the production of electrical energy, which can then be used to power electrical appliances in your car or battery charging. The thesis is divided into six main parts: a literature review of possible ways of getting electricity from the car damping, theoretical and mathematical analysis of problems, the choice of design with computational analysis of dampers and power calculation.
|
guest ::
