National Repository of Grey Literature 12 records found  1 - 10next  jump to record: Search took 0.01 seconds. 
Production of socket wrench
Kryštof, Marek ; Forejt, Milan (referee) ; Císařová, Michaela (advisor)
This thesis propses the design of production of a socket wrench. A socket wrench is used as safety wrench for loosening safety screws of the car wheels. The proper technology for production was chosen based on the component requirements. The component is made by using metal extrusion and heading. The starting blank for metal forming was chosen steel rod made of 1.7131 steel (ČSN 14 220) with a diameter of 26 milimeters. The safety wrench will be made by doublecrank press GTX-300H. Production will be done in three operations.
Bulk forming technology of connecting pin
Koukal, Vojtěch ; Šlais, Miroslav (referee) ; Forejt, Milan (advisor)
The project of master’s thesis elaborated within engineering studies of engineering technology deals with concept of manufacturing procedure of connecting pin made of steel 11 320 5R with cold forming. Two variants of production technique were projected based on the literature study of the cold heading and cold extrusion. Selected variant, for which the technological calculation was accomplished, consists of five forming operations. Manufacture was projected for multistage automatic forming machine TPM 8-A made by manufacturer Šmeral Brno with nominal forming force 1000 kN. Tool steel 19 436 was chosen as a material of extrusion and heading tools.
Bulk forming technology of pin connector
Kříbala, Milan ; Šlais, Miroslav (referee) ; Forejt, Milan (advisor)
The Bachelor’s thesis deals with the production of the coupling pin cold bulk forming with focus heading and extrusion. The part will be made of structural steel 11 320 5R. The size of the production is about 700 000 piece per year. The two processes was chosen for four forming operation. From the technological calculations were set forming by force 465 kN needed to select a suitable forming machine. Automatic machine TPM 8-A was elected due to force 1000 kN. The drawing documentation is part of the work. Extrusion tools are made of tool steel 19 830. One piece costs 0,6 Czech crowns – this calculation was in the technical-economic assessment.
Production of shaft
Jančík, Petr ; Štroner, Marek (referee) ; Císařová, Michaela (advisor)
The bachelor's thesis is classified under the field of Engineering Technology and proposes a process for the production of a shaft made of steel 12 050 by combined extrusion. The material in question can be used, for example, for parts of mining machines, larger gears, pins or screws. In accordance with the acquired findings on the issue of volume forming, the production of the component was designed for two forming operations. A block with a diameter of 55 mm and a length of 146 mm was chosen as a semi-finished product. The production was designed on a Schuler automatic machine, which is a part of the company Metaldyne Oslavany, with a nominal force of 2 000 tons and a height of 7 meters in a series of 100 000 pieces per year.
Design of Coupling Pin Production
Blažek, Matěj ; Podaný, Kamil (referee) ; Řiháček, Jan (advisor)
Bachelor’s thesis is aimed production of pin, made from steel 11 320-5R. This piece is in accordance to serial production 500 000 pieces year -1 made by cold bulk forming. Specifically it is about heading and forward extrusion. From two production variant was chosen the one with lower strain. By calculations there was set the power needed for production that equals Fc= 368,5 kN. Because of this power there was chosen a machine AKP 3-5 from company Hatebur. In the next step there was designed method that is in the attachment to the thesis. Final step was a control whether the idea of production by simulation is correct or not.
The objectives, methods and ability of the RNAV technical background.
Kadava, Marek ; Vláčil, Jindřich (referee) ; Vosecký, Slavomír (advisor)
This bachelor work is connected with air traffic. This paper deals with some questions about flying and flight planning. The objectiv of the work is to acquaint with area navigation method, its types and level, flight track production, objectives and benefits that this navigation mathod contributes.
Production of shaft
Jančík, Petr ; Štroner, Marek (referee) ; Císařová, Michaela (advisor)
The bachelor's thesis is classified under the field of Engineering Technology and proposes a process for the production of a shaft made of steel 12 050 by combined extrusion. The material in question can be used, for example, for parts of mining machines, larger gears, pins or screws. In accordance with the acquired findings on the issue of volume forming, the production of the component was designed for two forming operations. A block with a diameter of 55 mm and a length of 146 mm was chosen as a semi-finished product. The production was designed on a Schuler automatic machine, which is a part of the company Metaldyne Oslavany, with a nominal force of 2 000 tons and a height of 7 meters in a series of 100 000 pieces per year.
Design of Coupling Pin Production
Blažek, Matěj ; Podaný, Kamil (referee) ; Řiháček, Jan (advisor)
Bachelor’s thesis is aimed production of pin, made from steel 11 320-5R. This piece is in accordance to serial production 500 000 pieces year -1 made by cold bulk forming. Specifically it is about heading and forward extrusion. From two production variant was chosen the one with lower strain. By calculations there was set the power needed for production that equals Fc= 368,5 kN. Because of this power there was chosen a machine AKP 3-5 from company Hatebur. In the next step there was designed method that is in the attachment to the thesis. Final step was a control whether the idea of production by simulation is correct or not.
Production of socket wrench
Kryštof, Marek ; Forejt, Milan (referee) ; Císařová, Michaela (advisor)
This thesis propses the design of production of a socket wrench. A socket wrench is used as safety wrench for loosening safety screws of the car wheels. The proper technology for production was chosen based on the component requirements. The component is made by using metal extrusion and heading. The starting blank for metal forming was chosen steel rod made of 1.7131 steel (ČSN 14 220) with a diameter of 26 milimeters. The safety wrench will be made by doublecrank press GTX-300H. Production will be done in three operations.
Bulk forming technology of pin connector
Kříbala, Milan ; Šlais, Miroslav (referee) ; Forejt, Milan (advisor)
The Bachelor’s thesis deals with the production of the coupling pin cold bulk forming with focus heading and extrusion. The part will be made of structural steel 11 320 5R. The size of the production is about 700 000 piece per year. The two processes was chosen for four forming operation. From the technological calculations were set forming by force 465 kN needed to select a suitable forming machine. Automatic machine TPM 8-A was elected due to force 1000 kN. The drawing documentation is part of the work. Extrusion tools are made of tool steel 19 830. One piece costs 0,6 Czech crowns – this calculation was in the technical-economic assessment.

National Repository of Grey Literature : 12 records found   1 - 10next  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.