Original title:
Výroba hřídele
Translated title:
Production of shaft
Authors:
Jančík, Petr ; Štroner, Marek (referee) ; Císařová, Michaela (advisor) Document type: Bachelor's theses
Year:
2021
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Bakalářská práce spadá pod obor Strojírenská technologie a navrhuje postup výroby hřídele z oceli 12 050 kombinovaným protlačováním. Předmětnou součást lze využívat například pro části těžících strojů, větší ozubená kola, čepy nebo šrouby. Dle získaných poznatků k problematice objemového tváření byla výroba součásti navrhnuta na dvě tvářecí operace. Jako polotovar byl zvolen špalík o průměru 55 mm a délce 146 mm. Výroba byla navrhnuta na postupovém automatu značky Schuler o jmenovité síle 2 000 tun a výšce 7 metrů, který je součástí společnosti Metaldyne Oslavany, v sérii 100 000 kusů za rok.
The bachelor's thesis is classified under the field of Engineering Technology and proposes a process for the production of a shaft made of steel 12 050 by combined extrusion. The material in question can be used, for example, for parts of mining machines, larger gears, pins or screws. In accordance with the acquired findings on the issue of volume forming, the production of the component was designed for two forming operations. A block with a diameter of 55 mm and a length of 146 mm was chosen as a semi-finished product. The production was designed on a Schuler automatic machine, which is a part of the company Metaldyne Oslavany, with a nominal force of 2 000 tons and a height of 7 meters in a series of 100 000 pieces per year.
Keywords:
extrusion; heading; shaft; steel 12 050; volume forming; hřídel; objemové tváření; ocel 12 050; protlačování; pěchování
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/199983