|
|
Manufacturing Process and Applications of Composite Materials for buses parts
Rusek, Jan ; Julišová, Martina (referee) ; Němec, Karel (advisor)
The aim of the bachelor’s thesis is the evaluation and demonstration of the usability of composite materials in the bus industry. The first chapter provides an overview of selected types of composite materials, basic classification, description of their parts and demonstrations of methods of production. The second part of the bachelor’s thesis is focused on the evaluation of the advantages and disadvantages of using composite materials. The last part is focused on the producion of the sample from fiberglass.
|
|
|
The whirlpool design
Havlíček, Matěj ; Pech, Ondřej (referee) ; Štětina, Josef (advisor)
The bachelor thesis is conceived as a research of the availability of home whirlpools, their design and also as an analysis of the cost of production of the whirlpool. In the first part, there is an introduction of components and their variants for the whirlpool. The second part is focused on the author's design and the choice of components for the designed whirlpool. In conclusion, there is an expected price of the whirlpool and a comparison between buying a whirlpool or own homemade. The work contains a design in a program Autodesk Inventor.
|
|
|
Multifunctional Building Brno
Kotoulková, Leona ; Drobníček, Ladislav (referee) ; Menšíková, Naděžda (advisor) ; Sobotka, Jindřich (advisor)
This work contains technical drawings, architectural design and architectural detail of the Multifunctional house in Brno, Líšeň district. Basis for this design was taken from my student work of 6. semester. The design is mainly inspired by construction system - module frame container system by Intecom company. The intent is to make the best use of the profile of the terrain, which descends steeply. The building also responds to surrounding prefab developement and to the Novolíšeňská road, which stands for one of the busiest in Brno. The acces to the plot is situated on the opposite side from the road. This driveway is separated from the ascending main road by the supporting wall. A few parking places are situated there. There is also a bus stop in near vicinity, thanks to which is possible to reduce automobile transportation. The building is divided into three blocks. Main two with flats and third, ground-floor, between them serves as a pastry shop. These two main blocks are identical and each of them is axially symmetrical. Each block has four floors, three above and one under ground. A block contains four maisonette flats, four garages, two offices of individual use and shared middle connecting part. The middle connecting part is inspired by a greenhouse. The pavement here is reduced and mostly replaced by grassed floor, which can be used for growing plants. This whole part is sheltered by semipermeable fiberglass. The front-side of the building is covered by light facade Polycon, which also covers the whole front slanted part of the roof. The rest of the building is covered by galvanized trapezoid sheet of tin.
|
|
|
Production of fibreglass laminate parts
Nenov, Stanislav Stojanov ; Kalivoda, Milan (referee) ; Mouralová, Kateřina (advisor)
Bachelor´s thesis is specialised in production of the fiberglass part in the company Composite Components, a. s. In the introductory part the company and shortly its history and production is introduced. In the next parts composites and their dividing are described with specialisation in input materials for fiberglass production and different production technologies. Concrete producing part is described from the period of recieving the data for production of the model and moulds to production of the part. With modification of the production technology production effectiveness is achieved, which is reviewed in the technical-economic evaluation.
|
|
|
Design of a single-purpose tank
Martinec, Josef ; Molva, Martin (referee) ; Kašpárek, Jaroslav (advisor)
This diploma thesis presents a design of a single-purpose tanker. Firstly, variations of manures are distinguished, and the possible variants of tankers with their methods of manure application are evaluated. Secondly, the filling and discharging of tankers is described according to the used pumping technology. Furthermore, types of manure applicators and materials for surface-treated tanks are listed. In the design section, the use of individual components is justified. The frame of the tanker is checked for stress using the finite element method. The work includes complete technical drawing documentation.
|
|
|
Design of a single-purpose tank
Martinec, Josef ; Molva, Martin (referee) ; Kašpárek, Jaroslav (advisor)
This diploma thesis presents a design of a single-purpose tanker. Firstly, variations of manures are distinguished, and the possible variants of tankers with their methods of manure application are evaluated. Secondly, the filling and discharging of tankers is described according to the used pumping technology. Furthermore, types of manure applicators and materials for surface-treated tanks are listed. In the design section, the use of individual components is justified. The frame of the tanker is checked for stress using the finite element method. The work includes complete technical drawing documentation.
|
|
|
The whirlpool design
Havlíček, Matěj ; Pech, Ondřej (referee) ; Štětina, Josef (advisor)
The bachelor thesis is conceived as a research of the availability of home whirlpools, their design and also as an analysis of the cost of production of the whirlpool. In the first part, there is an introduction of components and their variants for the whirlpool. The second part is focused on the author's design and the choice of components for the designed whirlpool. In conclusion, there is an expected price of the whirlpool and a comparison between buying a whirlpool or own homemade. The work contains a design in a program Autodesk Inventor.
|
|
|
Multifunctional Building Brno
Kotoulková, Leona ; Drobníček, Ladislav (referee) ; Menšíková, Naděžda (advisor) ; Sobotka, Jindřich (advisor)
This work contains technical drawings, architectural design and architectural detail of the Multifunctional house in Brno, Líšeň district. Basis for this design was taken from my student work of 6. semester. The design is mainly inspired by construction system - module frame container system by Intecom company. The intent is to make the best use of the profile of the terrain, which descends steeply. The building also responds to surrounding prefab developement and to the Novolíšeňská road, which stands for one of the busiest in Brno. The acces to the plot is situated on the opposite side from the road. This driveway is separated from the ascending main road by the supporting wall. A few parking places are situated there. There is also a bus stop in near vicinity, thanks to which is possible to reduce automobile transportation. The building is divided into three blocks. Main two with flats and third, ground-floor, between them serves as a pastry shop. These two main blocks are identical and each of them is axially symmetrical. Each block has four floors, three above and one under ground. A block contains four maisonette flats, four garages, two offices of individual use and shared middle connecting part. The middle connecting part is inspired by a greenhouse. The pavement here is reduced and mostly replaced by grassed floor, which can be used for growing plants. This whole part is sheltered by semipermeable fiberglass. The front-side of the building is covered by light facade Polycon, which also covers the whole front slanted part of the roof. The rest of the building is covered by galvanized trapezoid sheet of tin.
|
|
|
Manufacturing Process and Applications of Composite Materials for buses parts
Rusek, Jan ; Julišová, Martina (referee) ; Němec, Karel (advisor)
The aim of the bachelor’s thesis is the evaluation and demonstration of the usability of composite materials in the bus industry. The first chapter provides an overview of selected types of composite materials, basic classification, description of their parts and demonstrations of methods of production. The second part of the bachelor’s thesis is focused on the evaluation of the advantages and disadvantages of using composite materials. The last part is focused on the producion of the sample from fiberglass.
|
|
|
Production of fibreglass laminate parts
Nenov, Stanislav Stojanov ; Kalivoda, Milan (referee) ; Mouralová, Kateřina (advisor)
Bachelor´s thesis is specialised in production of the fiberglass part in the company Composite Components, a. s. In the introductory part the company and shortly its history and production is introduced. In the next parts composites and their dividing are described with specialisation in input materials for fiberglass production and different production technologies. Concrete producing part is described from the period of recieving the data for production of the model and moulds to production of the part. With modification of the production technology production effectiveness is achieved, which is reviewed in the technical-economic evaluation.
|
guest ::
