|
Detached house under Holedna
Nemečková, Petra ; Dohnal, Jakub (referee) ; Jelínek, Petr (advisor)
The aim of the bachelor´s thesis is to design a detached passive house for family with 2 kids. It is located in Brno, Jundrov. The main entrance is situated to south-east. The building has flat extensive green roof, ventilated facade with wooden cladding and mineral insulation. It is based on plain concrete foundation strips. The vertical structures are masonry made of aerated concrete blocks. Horizontal load-bearing structures are constructed from prestressed concrete panels. The building has two storeys. On the first floor is situated social zone, where is living room connected to the kitchen and bathroom with WC and technical zone, where is utility room and storage. These two parts are slightly divided by hallway. On the second floor is private zone with bedrooms, master bedroom, study, walk-in wardrobe, bathroom, and WC. An external blinds are designed on the windows oriented to south-west and south-east to regulate daylight and reduce heat gains. Heating and cooling in the house are provided by an underfloor heating covering the thermal losses and gains of the building. Heat supply for water heating and underfloor heating is provided by a heat pump. Excess water from extensive green roof leads into the sewer system and a stormwater storage tank with a volume of 5m on the northwest edge of the plot. Afterwords, rainwater is discharged together with prefiltered sewage water into the combined sewer. Electricity is provided by a public network. Forced ventilation is provided by ventilation unit using flexible ducts installed in suspended ceiling. Ventilation is used only in living areas, bathrooms, and closet. The system has supply and exhaust ducts for air circulation connected to the distribution boxes and ended by vents with adjustable airflow . The ventilation unit with heat recovery and an air flow rate of 285 m/h is installed in utility room. Air exchange between the ventilation unit and exterior and ventilation unit and distribution boxes is provided by aerfoam ducts. Energy Performance Certificate is A – very efficient.
|
|
Family residence
Subally, Pavel ; Gintar, Jan (referee) ; Vajkay, František (advisor)
This bachelor thesis concerns a design of two floors family residence located in Zlín, Chlum on a parcel number 428/11 in the cadaster region of Zlín. The design if the residence includes the architectural, structural and technical solution according the investor’s requirements. The object is designed as timber frame structure with flat extensive green roof. The goal of the design was to create a residence with very low ecological impact during the construction process and with minimal ecological impact during its lifetime usage.
|
|
Multifuctional apartmernt house in Frýdek-Místek
Skotnica, Tomáš ; Vystrčil, Jan (referee) ; Štěpánek, Ladislav (advisor)
This bachelors thesis deals with the project documentation for the construction of a multi-purpose apartment house in Frýdek-Místek. The apartment building is designed as a partial basement with four floors. On the first floor are two retail establishments. Each of these establishments has separate entrance from the facade of the building. There are also two separate entrances to the residential part of the house. All entrances to the building are barrier-free. From second to fourth floors are located six residential units, two on each floor. In the cellar are located cellar boxes for each flats and technical room.
|
|
Kindergarten
Kaška, Jan ; Vlček, Ing Karel (referee) ; Vlček, Milan (advisor)
The diploma thesis contains a proposal and construction solution of a new nursery school in the village of Postřelmov in the stage of project documentation for construction. The kindergarten has a rectangular shape and has two above-ground floors and one basement floor. The main entrance to the building is wheelchair accessible and is oriented to the south. In the basement there are 26 parking places for employees of kindergarten and elementary school in Postřelmov and also a technical background. The first floor consists of two classes of kindergarten, on the second floor there is the third class and a large hall, which will be used mainly for cultural events in the kindergarten. The foundation structure is made up of concrete strips and the foundation foots are designed in places of garage parking. The vertical structures in the basement are designed from concrete fittings, the vertical load-bearing structures in the above-ground floors are designed in the Porotherm masonry system, the other non-load-bearing structures are designed in the Ytong system. Due to the large spans, the horizontal structures are designed from prestressed Spiroll ceiling panels. The roofing of the building consists of a flat green extensive roof. The project documentation also includes construction - physical assessment and fire - safety solution of the building.
|
|
House
Uheríková, Eliška ; Sibilla, Luboš (referee) ; Mohelníková, Jitka (advisor)
The subject of bachelor’s thesis is creation of project documentation of construction of a family house. The family house is a two-story building, without basement, partially covered by soil. The building is founded on foundation strips, load-bearing structures are designed as reinforced concrete with some partitions made from Vapis masonry. Ceiling structure is circle reinforced concrete slab with notched hinges, supported by load-bearing walls and inclined concrete columns in exterior. Pitched roof is design as extensive green roof, in interior visible timber rafter. Building object is situated on parcel no. 1946/3, municipality Krásné Pole, cadastral area Ostrava city, Moravian-Silesian region.
|
|
Apartment Building
Čermák, Radek ; Nespěšný, Ondřej (referee) ; Pěnčík, Jan (advisor)
The subject of this bachelor’s thesis is the elaboration of a project for the construction of a new apartment building with almost zero energy consumption. The apartment building is placed at a nonurban area of the village Němčany, on parcel number 2354/1. Altogether it has a shape of a prism, however in the frontage, each apartment has its own terrace, balcony, or loggia, which disrupt this shape. The whole object has 4 above ground floors and 1 underground floor. In the basement, there is a utility room, a common room, and cellars. On the first floor there are 4 residential units, a bicycle and carriage room, a cleaning room, and a room for batteries. There are 5 residential units on the second and third floor and 2 vast apartments on the fourth floor. Housing units are designed for 2-8 people, a total amount of up to 54 people can be accommodated here. The whole building is covered by green warm flat roof with a classic order of layers. Regarding the shape and dispositions, the vertical load-bearing structures are made of ceramic blocks THERM, the horizontal load-bearing structures and the perimeter walls in the basement are made of reinforced concrete. The whole building is based on plain concrete foundation strips. The perimeter walls are contact insulated with the ETICS system using facade polystyrene and plastered with snowy white, anthracite and red facade plaster.
|
|
Multifunctional building
Svoboda, Adam ; Valenta, Michal (referee) ; Rusinová, Marie (advisor)
The final thesis designs an apartment building with terraces, bikeshop and underground garage. The building is situated in the city of Hradec Králové. Building has four floors and one underground floor. The main root area is designed as extensive green roof. The supporting system consists of a cast-in-place reinforced concrete frame with masonry of brick blocks. The whole building will be insulated by external thermal insulation composite system of mineral fibers. The building design meets the requirements for almost zero energy consumption houses.
|
|
Office Building with Production Hall
Andelová, Veronika ; Pěnčík, Jan (referee) ; Košíčková, Ivana (advisor)
The subject of the thesis is the new construction of an administrative building and a production hall, which will be connected to each other. The administrative building is considering three above--ground floors, the smaller production hall will have only one floor. The building will fulfill the function of a local amenities and at the same time will have a production character for the purpose of the builder's profit. The main purpose of the work is the design of layout, structural and material solutions.
|
|
Private house with ordination
Kyceltová, Lucie ; Špás, Luděk (referee) ; Daněk, Lukáš (advisor)
The theme of this work is building solutions for residential new construction house in Vrchlabi. The family house is also designed medical office. The family house is located one floor and attic. Ground object consists of two rectangles, which divides the layout and operation of housing and employment, including part of the surgery. Roofing made a pitched roof and flat roof over part of the vegetation plan. The house is equipped with a slightly sloping plot in a quiet family houses. All habitable rooms are naturally ventilated and illuminated. The supporting structure consists of a system Liapor. The cladding is insulated contact insulation. The facade is simply divided in accordance with the large glass window openings.
|
|
Multifuctional apartmernt house in Frýdek-Místek
Skotnica, Tomáš ; Vystrčil, Jan (referee) ; Štěpánek, Ladislav (advisor)
This bachelors thesis deals with the project documentation for the construction of a multi-purpose apartment house in Frýdek-Místek. The apartment building is designed as a partial basement with four floors. On the first floor are two retail establishments. Each of these establishments has separate entrance from the facade of the building. There are also two separate entrances to the residential part of the house. All entrances to the building are barrier-free. From second to fourth floors are located six residential units, two on each floor. In the cellar are located cellar boxes for each flats and technical room.
|